Armasight MSI8000 Manuel utilisateur

USER MANUAL

ARMASIGHT by FLIRMSI8000®

Universal Long-Range Flashlight

ARMASIGHT by FLIRMSI8000 USER MANUAL 2

of this manual, in whole or in part, may be copied, photocopied,

translated, or transmitted by any electronic medium or in

machine-readable form without the prior written permission of

FLIR Systems, Inc.

Names and marks appearing on the products herein are either

registered trademarks or trademarks of FLIR Outdoor & Tactical

Systems and/or its subsidiaries. All other trademarks, trade names, or

company names referenced herein are used for identification only and

are the property of their respective owners.

This product is protected by patents, design patents, patents pending,

or design patents pending.

If you have questions that are not covered in this manual, or need

service, contact FLIR OTS customer support for additional information

prior to returning a flashlight.

Phone:1-888-959-2259

E-mail: OTS-Support@flir.com

This documentation is subject to change without notice.

Proper Disposal of Electrical

and Electronic Equipment (EEE)

The European Union (EU) has enacted Waste Electrical

and Electronic Equipment Directive 2002/96/EC (WEEE),

which aims to prevent EEE waste from arising; to

encourage reuse, recycling, and recovery of EEE waste;

and to promote environmental responsibility.

In accordance with these regulations, all EEE products labeled with the

“crossed out wheeled bin” either on the product itself or in the product

literature must not be disposed of in regular rubbish bins, mixed with

regular household or other commercial waste, or by other regular

municipal waste collection means. Instead, and in order to prevent

possible harm to the environment or human health, all EEE products

(including any cables that came with the product) should be responsibly

discarded or recycled.

To identify a responsible disposal method where you live, please

contact your local waste collection or recycling service, your original

place of purchase or product supplier, or the responsible government

authority in your area.

Business users should contact their supplier or refer to their purchase

contract.

Important Instructions and Notices

to the User:

Modification of this device without the express authorization of FLIR

Commercial Systems, Inc. may void the user’s authority under FCC

rules to operate this device.

Note 1: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that the interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from

that of the receiver

• Consult the dealer or an experienced radio/television

technician for help.

Industry Canada Notice:

This Class B digital apparatus complies with

Canadian ICES-003.

Avis d’Industrie Canada:

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

FLIR Outdoor & Tactical Systems

815 Dubuque Avenue, South San Francisco, CA 94080

Phone: 1-888-959-2259 or (650) 492-7755

Fax: 1-888-959-2260

International Phone/Fax: (650) 492-7755

E-mail: OTS-[email protected]

www.flir.com

without notice, check our website: www.flir.com.

ARMASIGHT by FLIRMSI8000 USER MANUAL 3

CONTENT Page

Safety Statement 4

1. Introduction 5

2. Getting Started 6

3. Operating 8

4. Maintenance 11

5. Warranty 12

6. Specifications 13

7. Spare Parts 14

ARMASIGHT by FLIRMSI8000 USER MANUAL 4

SAFET Y STATEMENT

• Read and follow all instructions.

• Heed all warnings.

• Only use the attachments/accessories specified by the manufacturer.

• All services must be provided by the manufacturer.

WARNING:

• When used in total darkness, the light from the infrared (IR)

illuminator is invisible to the unaided eye. However, the light can be

detected by Night Vision Devices (NVD).

• To reduce the risk of detection by an NVD, avoid prolonged activation

of the IR illuminator.

• The IR light is more easily detected by an NVD when used in smoke,

fog and rain. Avoid prolonged activation of the IR illuminator in these

conditions.

CAUTION:

• Do not scratch the external lens surfaces.

• Use only the supplied battery, and do not install any other types.

• Keep the lithium batteries well away from flames or extreme heat or

combustible materials. If handled or recharged incorrectly, lithium ion

batteries can cause fires, explosions, property damage, injuries, and

death.

• Keep the batteries and charger away from water or liquids of

any kind. Exposure to water may cause shock hazards and fatal

electrocution.

• Do not leave lithium ion rechargeable batteries and chargers

unattended while recharging.

• Do not operate the charger on wood, carpet, fabric, or any other soft

or flammable surfaces.

• Do not attempt to recharge disposable lithium batteries. Do not use

any unprotected lithium ion rechargeable batteries. Never recharge

lithium ion batteries in any chargers other than those designed for

the specific battery types being used.

MSI8000®Universal Long-Range Flashlight

The MSI8000®long-range infrared illuminator/ flashlight can be used

as a handheld device or mounted on the Weaver rail. Nevertheless,

in the industry, and throughout this manual, this type of device is also

referred to as flashlight.

ARMASIGHT by FLIRMSI8000 USER MANUAL 5

SECTION 1. INTRODUCTION

1.1 FLASHLIGHT

This manual covers the MSI8000 universal long range flashlight and

all applicable components. It is recommended that you read and

understand this manual to optimize the flashlight operation.

1.2 INTRODUCTION

MSI8000 universal long range flashlight includes everything you need

to recover your game after the sun goes down or to enhance the

capabilities of night vision weapon sights and observation devices. You

can choose IR, white, and optional red or green interchangeable LED

modules for your intended game. Changing your LED module color can

be done in less than 30 seconds in the field.

NO filtered lenses are used. Filtered lenses decrease your useful beam

distance by more than 50%. By using a clear lens and colored LED, you

are assured to reach maximal distance from your illumination. MSI8000

with IR LED module significantly extends the capabilities of Night

Vision devices.

With 3 power modes (Low, Medium, and High), the MSI8000 flashlight

provides a powerful, focusable circle of light.

MSI8000 comes standard equipped with a rechargeable battery and

charger unit. Optional weapon kit includes a wireless remote control

and weapon mount. An optional Afocal Doubler doubles the distance of

illumination for ultra long distance observation.

1.3 FEATURES

• Powerful, long range flashlight/ IR illuminator

• Interchangeable LED modules (IR, White)

• High power diodes

• Power adjustment

• Wide range beam angle adjustment

• Eye safe

• Low battery warning indicator

• Auto Power Off function for over-heat protection and battery saving

• Lightweight and rugged

• Ideal for extreme, low light conditions

• Can be used as a handheld device or mounted on the Weaver rail

• Mount with a beam direction adjustment

• Optional Afocal Doubler for ultra long distance observation

• Limited Two-Year Warranty

1.4 REGISTER YOUR MSI8000

You can register your product online at:

www.flir.com

ARMASIGHT by FLIRMSI8000 USER MANUAL 6

SECTION 2. GETTING STARTED

2.1 UNPACKING AND INSPECTING

The MSI8000 is available with the features, options, and accessories

described in this manual. Refer to the packing list enclosed with your

product to determine the actual contents of your product package.

2.2 BATTERY

The MSI8000 operates on a single 18650 rechargeable battery.

Fully charge the battery before installing in MSI8000. Insert the 18650

battery into charger, aligning the polarity symbols on the battery

with the polarity symbols on the charger. Never install the battery

backwards.

Connect the power cord to an appropriate power source. A charger

indicator light will flash red when a battery is charging, and will change

to green when the battery has been fully charged. Remove the battery

promptly after charging has been completed.

LOW BATTERY INDICATOR

When the flashlight is ON, a flashing FIRE indicator placed on the

tail cap of MSI8000 indicates that the battery is low. This indicator

provides an alert to recharge the battery.

BATTERY INSTALLATION

1. Unscrew the tail cap in a counter-clockwise direction.

2. Insert the battery with the negative (-) pole pointing forward (toward

the light head). Align the polarity symbols on the battery with the

polarity symbols on the cap.

3. Replace the tail cap.

ThankYou CardQuick Start Guide

Charger

18650

Rechargeable Battery

White LED

Module

(preinstalled)

IR LED

Module

Lens Cap

Flashlight

Soft Carrying Case Tail Cap

BatteryLight Head

ARMASIGHT by FLIRMSI8000 USER MANUAL 7

2.3 OPTIONAL EQUIPMENT

Optional items are shown and listed in the table below. The PART NO.

column indicates the primary number used by the manufacturer to

identify an item.

OPTIONAL EQUIPMENT PART NO.

Afocal Doubler

Doubles the distance of MSI8000 flashlight

beam. Comes complete with an thread adapter.

ANAF18XLRM

Weapon Kit

Includes dedicated mount for the MSI8000 to be

installed on a Picatinny/Weaver rail, wireless

remote control for flashlight on/off, and adapter

for mounting the remote control unit to the

Picatinny/Weaver rail.

ANAMMFI001

Green LED Module

Interchangeable module with green LED. ANLDGREEN1

Red LED Module

Interchangeable module with red LED. ANLD00RED1

Green LED

Module

Red LED

Module

Afocal Doubler Weapon Kit

ARMASIGHT by FLIRMSI8000 USER MANUAL 8

SECTION 3. OPERATING

3.2 OPERATING PROCEDURES

1. Open the lens cap.

2. Set the function switch to the position corresponding to the required

light power.

3. Press the operating button to activate the flashlight.

4. Adjust the light beam focus by rotating the light head.

5. Adjust the light power by selection position of the function switch

(LOW-MID-HI).

6. Set the function switch to the OFF position to turn off the flashlight.

3.3 AUTO POWER OFF FUNCTION

Auto Power Off is a feature of the MSI8000 that protects the

flashlight for overheat and helps to guard against draining the battery

prematurely by inadvertently leaving the flashlight on.

The flashlight automatically switches to standby mode after

approximately five minutes of operation.

If the Auto Power Off function turns off the MSI8000 when it is used

you need turn on the flashlight again by pushing the operating button.

3.4 REPLACING THE LED MODULE

1. Loosen the locking screw of the light head (make two full turns of

the screw).

2. Unscrew the light head.

3. Unscrew the LED module by using the ledges of the lens cap.

4. Remove the protective cap from the interchangeable LED module.

5. Screw the LED module onto the place by using the lens cap.

6. Screw the light head onto the place.

7. Secure the light head with a locking screw. Do not force to tighten

the screw.

Lens Cap

Ledge

Light Head

LED Module

Locking Screw

3.1 CONTROLS

This section details the use of the flashlight’s controls.

FIRE Indicator

Lens Cap

Locking Screw

Eyelet for Strap

Operating Button

Light Head

Function Switch

3.1.1 FUNCTION SWITCH

The function switch performs the following functions:

• Selects the power mode: LOW (1/3 power), MID (1/2 power), or HI

(full power).

• Activates standby mode when turned to LOW, MID, or HI position. In

standby mode the flashlight can be activated/deactivated by pushing

the operation button or by an optional wireless remote control.

• Deactivates the flashlight when turned to OFF.

3.1.2 OPERATING BUTTON

The operating button performs the following functions:

• Activates the flashlight in preselected power mode.

• Turns off the light when pressed again.

3.1.3 INDICATION

The green LED indicate the following states of the flashlight:

• FIRE indicator glows green light when flashlight is activated.

• FIRE indicator flashes when the battery is low.

3.1.4 FOCUS ADJUSTMENT

The light beam can be focused manually by turning the light head of

flashlight. The direction of rotation to a floodlight and to a spotlight is

marked on the light head.

ARMASIGHT by FLIRMSI8000 USER MANUAL 9

3.5 POWER LIMITING

WARNING:

The optional Green and Red interchangeable LED modules works

only in LOW and MID power modes.

Use a special limiting screw to block high power mode (HI) as follows:

1. Unscrew the limiting screw from the storage socket.

2. Screw the limiting screw to the HI limiting position.

Limiting Screw

Limiting Position

Storage Socket

3.6 USING THE OPTIONAL AFOCAL LENS

An optional Afocal Doubler for MSI8000 doubles the distance of light

for long-distance observation.

Afocal Doubler

To mount the afocal lens to flashlight, screw it into the threading of the

standard objective lens on the MSI8000.

3.7 USING THE OPTIONAL WEAPON KIT

WARNING:

Always make sure your firearm is unloaded before you place

the equipment on the firearm. Always verify that the chamber

is empty, especially if you stop the procedure and resume later.

Safe handling rules should be followed at all times.

THE USER ASSUMES ALL RESPONSIBILITY AND LIABILITY

FOR HAVING THE ARMASIGHT BY FLIR EQUIPMENT PROPERLY

MOUNTED TO A FIREARM AND USING THE ARMASIGHT BY LIR

EQUIPMENT PROPERLY. ALWAYS CHECK THE CONDITION OF

YOUR MOUNTING SYSTEM PRIOR TO USING YOUR FIREARM.

To mount the MSI8000 to a weapon use a Quick-Release Picatinny

Mount (QRM) adapter from the optional Weapon Kit. This small arms

adapter allows the MSI8000 to be mounted onto Picatinny/Weaver rail.

3.7.1 QRM ADAPTER INSTALLATION

To install the QRM adapter to flashlight perform the following steps:

1. Unscrew four screws and remove the clamp from the mount.

2. Remove top insert.

3. Place the MSI8000 into mount with insert.

4. Install the top insert and align it with the second insert.

5. Install the clamp and fasten it with four screws.

Clamp Screws

MSI8000 Insert

Insert

Clamp

Mount

3.7.2 MOUNTING THE MSI8000 ON A PICATINNY/

WEAVER RAIL

Mount the MSI8000 on a Picatinny/Weaver rail as follows:

1. Unlock the clamping device of the QRM adapter by pushing down on

the lever holder and unlocking the lever.

MSI8000

Picatinny/Weaver Rail

QRM Adapter

ARMASIGHT by FLIRMSI8000 USER MANUAL 10

2. Install the flashlight on the Picatinny/Weaver rail so that the stop of

QRM slides into the transverse slots on the rail.

UNDERSIDE VIEW OF THE MOUNT.

LOCKED POSITION

Stop Clamping

Device

Lever Holder

Lever

3. Affix the mount to the rail by locking the lever.

4. Verify that the clamping device is firmly holding the flashlight. If

necessary, adjust the clamping device as detailed below.

3.7.3 CLAMPING DEVICE ADJUSTMENT

To adjust the mount’s clamping device, do the following:

1. Remove the MSI8000 from the rail.

2. With unlocked clamping device push the cam towards the arrow,

which will cause the nut to slide out of its hole.

UNDERSIDE VIEW OF THE MOUNT.

UNLOCK POSITION

Nut

Cam

Clamping

Device

3. To tighten/ loosen the clamping device, push down on the cam

and turn the nut clockwise/counterclockwise respectively, in one-two

increments (see note below). Much like when the cam is released,

backward-moving springs will cause the nut to slide back into its hole.

NOTE:

The eight-sided nuts of the mount’s lever-cam locks will only fit

into their holes if turned in one of the discrete positions, using

45-degree increments.

4. Verify that the adjusted clamping device is securely holding the

weapon’s mounting rail.

3.7.4 LIGHT SPOT POSITION ADJUSTMENT

Adjust the flashlight spot position as follows:

1. Loosen the screws of the clamp on the mount.

2. Turn on the flashlight. Turn on night vision device if you use flashlight

with IR module.

3. Carefully move the MSI8000 up and down and side to side and

observe the light spot position relative to the aiming point of weapon or

the night vision device.

4. Once the light spot is centered in the field of view, tighten the

screws of the clamp.

Screws of Clamp

3.7.5 FASTENING A WIRELESS REMOTE CONTROL

TO A WEAPON

Using the supplied Velcro®tape, fasten the remote control to your

weapon in an easily accessible place (e.g., on the front of the rifle

stock).

If your rifle has a Picatinny/Weaver rail on the front end, you can use

the Picatinny adapter for the Wireless Remote. Install the adapter onto

the rail. Insert the remote control unit into the adapter.

Velcro®Tape

Remote Control Remote Control

Picatinny Adapter

Picatinny/Weaver Rail

3.7.6 USING THE WIRELESS REMOTE CONTROL

To operate the MSI8000 with remote control, turn the operation switch

to LOW, MID, or HI position. To activate the flashlight, press the remote

control button. To deactivate the flashlight, press the remote control

button again.

Table des matières

Autres manuels Armasight Lampe de poche

Armasight

Armasight XLR-IR850 Manuel utilisateur

Manuels Lampe de poche populaires d'autres marques

StreamLight

StreamLight PROPOLYMER 2AA Manuel utilisateur

StreamLight

StreamLight Stinger Manuel utilisateur

Silverline

Silverline 994024 Manuel utilisateur

Gama Sonic

Gama Sonic 23i60065 Manuel utilisateur

Olympia

Olympia RG580 CREE XM-L2 Manuel utilisateur

EUFAB

EUFAB 13495 Manuel utilisateur

OLIGHT

OLIGHT S35 BATON Manuel utilisateur

Kopp

Kopp Emergency Sensor Light Manuel utilisateur

YLP

YLP PROFESSIONAL Series Manuel utilisateur

Light motion

Light motion GoBe Manuel utilisateur

MOB

MOB MO8622 Manuel utilisateur

EuroLite

EuroLite KKS-3 Manuel utilisateur

Carson

Carson 500907010 Manuel utilisateur

Duracell

Duracell 550 Manuel utilisateur

Mactronic

Mactronic Black Eye 1300 Manuel utilisateur

Eurotops

Eurotops 29780 Manuel utilisateur

MOB

MOB MO8690 Manuel utilisateur

Pelican

Pelican L1 1930 LED Manuel utilisateur