ARM Musca-B1 Guide d'installation
Arm® Musca-B1 Test Chip and Board
Technical Overview
Copyright © 2018–2020 Arm Limited or its affiliates. All rights reserved.
101311_0000_02_en
Arm® Musca-B1 Test Chip and Board
Technical Overview
Copyright © 2018–2020 Arm Limited or its affiliates. All rights reserved.
Release Information
Document History
Issue Date Confidentiality Change
0000-00 03 December 2018 Non-Confidential First issue
0000-01 01 August 2019 Non-Confidential Second issue
0000-02 29 March 2020 Non-Confidential Third issue
Non-Confidential Proprietary Notice
This document is protected by copyright and other related rights and the practice or implementation of the information contained in
this document may be protected by one or more patents or pending patent applications. No part of this document may be
reproduced in any form by any means without the express prior written permission of Arm. No license, express or implied, by
estoppel or otherwise to any intellectual property rights is granted by this document unless specifically stated.
Your access to the information in this document is conditional upon your acceptance that you will not use or permit others to use
the information for the purposes of determining whether implementations infringe any third party patents.
THIS DOCUMENT IS PROVIDED “AS IS”. ARM PROVIDES NO REPRESENTATIONS AND NO WARRANTIES,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE
WITH RESPECT TO THE DOCUMENT. For the avoidance of doubt, Arm makes no representation with respect to, and has
undertaken no analysis to identify or understand the scope and content of, third party patents, copyrights, trade secrets, or other
rights.
This document may include technical inaccuracies or typographical errors.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ARM BE LIABLE FOR ANY DAMAGES,
INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR
CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING
OUT OF ANY USE OF THIS DOCUMENT, EVEN IF ARM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
This document consists solely of commercial items. You shall be responsible for ensuring that any use, duplication or disclosure of
this document complies fully with any relevant export laws and regulations to assure that this document or any portion thereof is
not exported, directly or indirectly, in violation of such export laws. Use of the word “partner” in reference to Arm’s customers is
not intended to create or refer to any partnership relationship with any other company. Arm may make changes to this document at
any time and without notice.
If any of the provisions contained in these terms conflict with any of the provisions of any click through or signed written
agreement covering this document with Arm, then the click through or signed written agreement prevails over and supersedes the
conflicting provisions of these terms. This document may be translated into other languages for convenience, and you agree that if
there is any conflict between the English version of this document and any translation, the terms of the English version of the
Agreement shall prevail.
The Arm corporate logo and words marked with ® or ™ are registered trademarks or trademarks of Arm Limited (or its
subsidiaries) in the US and/or elsewhere. All rights reserved. Other brands and names mentioned in this document may be the
trademarks of their respective owners. Please follow Arm’s trademark usage guidelines at http://www.arm.com/company/policies/
trademarks.
Copyright © 2018–2020 Arm Limited (or its affiliates). All rights reserved.
Arm Limited. Company 02557590 registered in England.
110 Fulbourn Road, Cambridge, England CB1 9NJ.
LES-PRE-20349
Arm® Musca-B1 Test Chip and Board
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
2
Non-Confidential
Confidentiality Status
This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in
accordance with the terms of the agreement entered into by Arm and the party that Arm delivered this document to.
Unrestricted Access is an Arm internal classification.
Product Status
The information in this document is Final, that is for a developed product.
Web Address
www.arm.com
Conformance Notices
This section contains conformance notices.
Federal Communications Commission Notice
This device is test equipment and consequently is exempt from part 15 of the FCC Rules under section 15.103 (c).
CE Conformity
The Waste Electrical and Electronic Equipment (WEEE) marking, that is, the crossed out wheelie-bin figure, indicates that this
product must not be disposed of with general waste within the European Union. To prevent possible harm to the environment from
uncontrolled waste disposal, the user is required to recycle the product responsibly to promote reuse of material resources. To
comply with EU law, you must dispose of the product in one of the following ways:
• Return it to the distributer where it was purchased. The distributer is required to arrange free collection when requested.
• Recycle it using local WEEE recycling facilities. These facilities are now very common and might provide free collection.
• If purchased directly from Arm, Arm provides free collection. Please e-mail [email protected] for instructions.
The CE Declaration of Conformity for this product is available on request.
The system should be powered down when not in use.
It is recommended that ESD precautions be taken when handling this product.
The product generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to
radio or television reception, which can be determined by turning the equipment off or on, you are encouraged to try to correct the
interference by one or more of the following measures:
• Ensure attached cables do not lie across any sensitive equipment.
• Reorient the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note
It is recommended that wherever possible shielded interface cables be used.
Arm® Musca-B1 Test Chip and Board
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
3
Non-Confidential
Contents
Arm® Musca-B1 Test Chip and Board Technical
Overview
Preface
About this book ...................................................... ...................................................... 6
Feedback ...................................................................................................................... 9
Chapter 1 Introduction
1.1 Precautions .............................................................................................................. 1-11
1.2 About the Musca-B1 test chip and board ................................................................ 1-12
1.3 Location of components .......................................................................................... 1-13
Chapter 2 Hardware and software
2.1 Board hardware ................................................... ................................................... 2-16
2.2 Musca-B1 test chip .................................................................................................. 2-18
2.3 Software, firmware, board, and tools setup .............................. .............................. 2-22
Appendix A Specifications
Appendix B Revisions
B.1 Revisions ................................................... ................................................... Appx-B-26
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
4
Non-Confidential
About this book
This book gives an overview of the Arm® Musca-B1 test chip and board.
Intended audience
This book is written for experienced hardware and software developers to enable low-power, secure
Internet of Things (IoT) endpoint development using the Musca‑B1 test chip and board.
Using this book
This book is organized into the following chapters:
Chapter 1 Introduction
This chapter introduces the Musca‑B1 test chip and Musca‑B1 board.
Chapter 2 Hardware and software
This chapter gives an overview of the Musca‑B1 test chip and Musca‑B1 board hardware and
software.
Appendix A Specifications
See the Arm® Musca
‑
B1 Test Chip and Board Technical Reference Manual for information on the
Musca‑B1 board power supply rails and maximum current loads.
Appendix B Revisions
This appendix describes the technical changes between released issues of this book.
Glossary
The Arm® Glossary is a list of terms used in Arm documentation, together with definitions for those
terms. The Arm Glossary does not contain terms that are industry standard unless the Arm meaning
differs from the generally accepted meaning.
See the Arm® Glossary for more information.
Typographic conventions
italic
Introduces special terminology, denotes cross-references, and citations.
bold
Highlights interface elements, such as menu names. Denotes signal names. Also used for terms
in descriptive lists, where appropriate.
monospace
Denotes text that you can enter at the keyboard, such as commands, file and program names,
and source code.
monospace
Denotes a permitted abbreviation for a command or option. You can enter the underlined text
instead of the full command or option name.
monospace italic
Denotes arguments to monospace text where the argument is to be replaced by a specific value.
monospace bold
Denotes language keywords when used outside example code.
<and>
Encloses replaceable terms for assembler syntax where they appear in code or code fragments.
For example:
MRC p15, 0, <Rd>, <CRn>, <CRm>, <Opcode_2>
Preface
About this book
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
6
Non-Confidential
SMALL CAPITALS
Used in body text for a few terms that have specific technical meanings, that are defined in the
Arm® Glossary. For example, IMPLEMENTATION DEFINED, IMPLEMENTATION SPECIFIC, UNKNOWN, and
UNPREDICTABLE.
Timing diagrams
The following figure explains the components used in timing diagrams. Variations, when they occur,
have clear labels. You must not assume any timing information that is not explicit in the diagrams.
Shaded bus and signal areas are undefined, so the bus or signal can assume any value within the shaded
area at that time. The actual level is unimportant and does not affect normal operation.
Clock
HIGH to LOW
Transient
HIGH/LOW to HIGH
Bus stable
Bus to high impedance
Bus change
High impedance to stable bus
Figure 1 Key to timing diagram conventions
Signals
The signal conventions are:
Signal level
The level of an asserted signal depends on whether the signal is active-HIGH or active-LOW.
Asserted means:
• HIGH for active-HIGH signals.
• LOW for active-LOW signals.
Lowercase n
At the start or end of a signal name, n denotes an active-LOW signal.
Additional reading
This book contains information that is specific to this product. See the following documents for other
relevant information.
Preface
About this book
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
7
Non-Confidential
Arm publications
•Arm® Musca
‑
B1 Test Chip and Board Technical Reference Manual (101312).
•Arm® CoreLink™ SSE
‑
200 Subsystem for Embedded Technical Overview (101123).
•Arm® CoreLink™ SSE
‑
200 Subsystem for Embedded Technical Reference Manual (101104).
•Arm® CoreLink™ SIE
‑
200 System IP for Embedded Technical Reference Manual (DDI 0571).
•Arm® Cortex®
‑
M System Design Kit Technical Reference Manual (DDI 0479).
•Arm® Cortex®
‑
M33 Processor Technical Reference Manual (100230).
•PrimeCell UART (PL011) Technical Reference Manual (DDI 0183).
•Arm® PrimeCell Real Time Clock (PL031) Technical Reference Manual (DDI 0224).
•CoreSight™ Components Technical Reference Manual (DDI 0314).
•Arm® DS-5 Arm DSTREAM User Guide (DUI 0481).
•Arm® DS-5 Using the Debug Hardware Configuration Utilities (DUI 0498).
The following confidential books are only available to licensees or require registration with
Arm.
•Arm® CryptoCell
‑
312 Technical Reference Manual (100774).
•Arm® CryptoIsland
‑
300 Technical Reference Manual (101119).
•Arm® v7
‑
M Architecture Reference Manual (DDI 0403).
•Arm® AMBA® 5 AHB Protocol Specification (IHI 0033).
•Arm® AMBA® APB Protocol Specification Version 2.0 (IHI 0024).
Preface
About this book
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
8
Non-Confidential
Feedback
Feedback on this product
If you have any comments or suggestions about this product, contact your supplier and give:
• The product name.
• The product revision or version.
• An explanation with as much information as you can provide. Include symptoms and diagnostic
procedures if appropriate.
Feedback on content
If you have comments on content then send an e-mail to [email protected]. Give:
• The title Arm Musca-B1 Test Chip and Board Technical Overview.
• The number 101311_0000_02_en.
• If applicable, the page number(s) to which your comments refer.
• A concise explanation of your comments.
Arm also welcomes general suggestions for additions and improvements.
Note
Arm tests the PDF only in Adobe Acrobat and Acrobat Reader, and cannot guarantee the quality of the
represented document when used with any other PDF reader.
Preface
Feedback
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
9
Non-Confidential
Chapter 1
Introduction
This chapter introduces the Musca‑B1 test chip and Musca‑B1 board.
It contains the following sections:
•1.1 Precautions on page 1-11.
•1.2 About the Musca
‑
B1 test chip and board on page 1-12.
•1.3 Location of components on page 1-13.
101311_0000_02_en Copyright © 2018–2020 Arm Limited or its affiliates. All rights
reserved.
1-10
Non-Confidential
Table des matières
Autres manuels ARM Équipement de test
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
