Arista AP-C250 Manuel utilisateur
Headquarters
408 547-5500
www.arista.com
Arista, Mojo, the Arista logo, and the Mojo logo are trademarks or registered trademarks
of Arista Networks, Inc. and Mojo Networks, LLC. in the U.S. and other countries.
© 2019 Arista Networks, Inc. www.arista.com
Support
408 547-5502
866 476-0000
support-wi@arista.com
Sales
408 547-5501
866 497-0000
Our social responsibility includes conducting business in a manner that minimizes our ecological impact on the
environment and reducing waste in our supply chain. To that end, the Quick Start Guide and Safety Manual are available
at www.arista.com.
Getting Started
Instructions on getting started with your new access point, including installation and initial conguration instructions,
are available at
http://www.arista.com/en/support/product-documentation
Other documents available at this location include:
You can access Arista documentation at
https://www.arista.com/en/support
Documents available at this location include:
• Wireless Manager Appliance Quick Start Guide
• Safety and Compliance Guide
• WiFi Regulatory Compliance Statements
• User Manual
You may also download current software, as well as view FAQs, Warranty Information, Knowledge Base articles, Security
Advisories, Software Licenses, and Field Notices at https://www.arista.com/en/support
Receiving and Inspecting the Equipment
Upon receiving the access point, inspect the shipping boxes and record any external damage. Retain the packing
materials if you suspect that part of the shipment is damaged; the carrier may need to inspect them.
If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any accessories that
may be packaged in the same box as the main unit.
Inspect the packing list and conrm that you received all listed items. Compare the packing list with your purchase order.
Obtaining Technical Assistance
Customers, partners, resellers, or distributors holding a valid Arista Service Contract can obtain technical support
through these sources:
Email: support-wi@arista.com. This is the easiest way to create a new service request.
Include a detailed description of the problem and the output of “show tech-support”.
Web: www.arista.com/en/support.
A support case may be created through the support portal on our website.
PDOC-00173-04
5453 Great America Parkway
Santa Clara, CA 95054
USA
408 547-5500
www.arista.com
00173-04
AP-C250/AP-C260 Getting Started Guide
Package Contents
The C-250/C-260 package must contain the following components.
Note: For a fully functional device, please update its rmware to the latest version.
Ceiling Mounting the C-250/C-260
1. Ax bracket to T - Grid. 2. Rotate bracket to snap
on to T- Grid.
3. Place the rst mounting post on the
rear-side of the device on to the lower
notch of the bracket.
5. Ensure that all the mounting posts on the rear-
side of the device are snapped in to the respective
notches on the bracket.
4. Rotate the device such that the center mounting
post ts in to the center notch on the bracket.
15/16” (24mm)
Mounting Bracket
C-250/C-260
Wall Mounting the C-250/C-260
1. Drill four mounting holes in the wall. 2. Insert four anchors.
3. Ax mounting bracket on the wall 4. Attach device to the mounting bracket. Pull the
release key outward. Attach the AP stubs to the
bracket holder ensuring a rm t.
6. Fasten release key screw with a tamper resistant
T10 torx screwdriver to lock AP to the bracket.
5. Once attached, push in the release key to lock the
hooks and make sure all hooks are locked in place.
Note: If needed, the wall mounting accessory SKU (OEM-MNT-C110/C250-FLAT) can be ordered and
purchased separately.
Getting the C-250/C-260 Online
Step 1: Power up
Plug one end of an Ethernet cable into the PoE+ (802.3bt or 802.3at) switch or injector and the other end
into the Ethernet/PoE+ port on the C-250/C-260. Ensure the PoE+ source you are using is turned ON, or
use a compatible power adaptor (Arista SKU: OEM-PWR-W4) to power the C-250/C-260.
Warning: If you are not using PoE+, ensure that you use only an AC power adaptor supported by the
C-250/C-260 access point (AP). This product is intended to be supplied by a Listed Direct Plug-In Power
Unit marked “Class 2”, Listed Power Adapter or DC power source marked “L.P.S.”(or “Limited Power Source”)
and rated from 12 V DC, 3.3 A minimum.
Troubleshooting
Using an 802.11ax Access Point on a 100 Mb or 10 Mb Ethernet connection may cause performance issues in
the WLAN. Use Gigabit Ethernet uplinks when possible.
1. Check whether the Ethernet cable is plugged into the correct port (PoE+) on the C-250/C-260 and the
other end of the cable is plugged into an Ethernet jack or port on a switch that is turned ON.
2. If the C-250/C-260 did not receive a valid IP address from the DHCP server, check whether the DHCP server
is ON and available on the VLAN/subnet to which the AP is connected. If the AP still fails to get a valid IP
address, reboot the AP by pressing the reset button to see if the problem gets resolved.
3. If you are using Arista Cloud Services, then open the TCP port 443 (SSL). If you have an on-premises
installation, then open the ports UDP 3851 and port 80. If you are using a Proxy, Web Accelerator or URL
Content Filter in between the AP and the Internet, ensure that the settings allow communication between
the AP and Arista Cloud Services. If your conguration requires you to specify an exact IP address or IP
range for Arista Cloud Services, please contact Technical Support.
Step 3: Check the LED status
Power LED: The table below describes the states of the Power LED.
Reduced capability indicates that the AP is getting less than the required maximum power from the PoE
switch, i.e., 802.3at instead of 802.3bt.
LAN LEDs: ON when the corresponding link is up.
WiFi Radio LEDs: ON when the corresponding radio is up.
Step 2: Connect to the network
If you are using a PoE+ injector, make sure the
data connection is plugged into a suitable switch
port with proper network connectivity.
Green Orange
Solid Running at full capability Running at reduced capability
Blinking Received IP address, but not connected to the server Did not receive an IP address
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Arista Point d'accès sans fil
Arista
Arista W-318 Manuel utilisateur
Arista
Arista AP-O235 Manuel utilisateur
Arista
Arista C-120 Manuel utilisateur
Arista
Arista C-130 Manuel utilisateur
Arista
Arista C-100 Manuel utilisateur
Arista
Arista O-235E Manuel utilisateur
Arista
Arista O-105E Manuel utilisateur
Arista
Arista C-130E Manuel utilisateur
Arista
Arista O-105 Manuel utilisateur
Arista
Arista AP-O235E Manuel utilisateur
Arista
Arista O-235 Manuel utilisateur
Arista
Arista C-330E Manuel utilisateur
Arista
Arista AP-C230E Manuel utilisateur
Arista
Arista AP-C230 Manuel utilisateur
Arista
Arista C-230E Manuel utilisateur
Arista
Arista C-200 Manuel utilisateur
Arista
Arista C-230 Manuel utilisateur
Arista
Arista OEM-AP-O105E Manuel utilisateur
Arista
Arista C-330 Manuel utilisateur
Arista
Arista C-250 Manuel utilisateur
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
