Argox AS-8520 Manuel utilisateur

Revision V3 Jun 04th, 2014

Quick Reference Guide

Connecting Argox Cordless Scanner with Your

Smart Devices

Bluetooth HID

Argox offers additional connection solution with the AS-8020CL and AS-8520

cordless imagers. The new Bluetooth HID feature for these two models provides the

ability to connect other Bluetooth devices, for example, smartphones, tablet PCs,

iPod, iPhone, iPad,… which require HID protocol to pair with. This feature resolves

the previous problem that AS-8020CL and AS-8520 can only connect with other

devices via the SPP protocol.

AS-8020CL AS-8520

The Bluetooth HID only applies to these models:

Model

Phase-in S/N

AS-8520

40950119

AS-8020 CL

40758535

Listing of the OSs that new AS-8020CL and AS-8520 support

OS.

Version

iOS

V4.1 or above

Android

V2.3 or above

Windows Mobile

V6.1 or above

Note: Even though the user owns the mobile device with one of the above

said OSs, it may still fail to connect with new AS-8520 and AS-8020CL

because the mobile device does not support HID connectivity in their

official released firmware.

Connecting with Apple iOS devices (iPod, iPhone, iPad)

1. Power off the cradle

2. Set the PIN code to 0000 assigned to the target Bluetooth device

3. Make sure the battery in the AS-8020CL

or AS-8520 is fully charged.

4. Scan “iOS HID”barcode:

5. Power on your Apple device and run

“Settings”. Go to “General”–“Bluetooth”

and turn the Bluetooth On. Then the Bluetooth device searching will start.

6. Your Apple device will find Argox Cordless Scanner “AS8520 XXXXXXXXX”or

“AS8020CL XXXXXXXXX”under the status of “Not Paired”.

7. Click the found device and you will hear three beeps after certain connecting

time. The status will be changed to “Connected”. Now your Argox Cordless

Scanner successfully connects with your Apple device.

Revision V3 Jun 04th, 2014

Simply click the “Notes”in desktop of Apple device and create a “New Note”.

Tap on the New Note and see the cursor showed on the screen. Use your Argox

Cordless Scanner to scan a barcode and the data will show on the Note.

Note: Apple iOS devices will allow only one input device working at the

same time. So when you connect an Argox Cordless Scanner with your

Apple device, the Apple Virtual Keyboard will be invalid automatically. To

have the Apple Virtual Keyboard be available again, your will need to scan

the barcode below.

Connecting with Android devices (mobile phone, tablet PC)

1. Power off the cradle

2. Set the PIN code to 0000 assigned to the target Bluetooth device

3. Make sure the battery in the AS-8020CL

or AS-8520 is fully charged.

4. Scan “PC HID”barcode:

5. Power on your Android device and run

“Settings”. Turn the Bluetooth On. Click “Blutooth”and then the Bluetooth device

searching will start.

6. Your Android device will find Argox Cordless Scanner “AS8520 XXXXXXXXX”or

“AS8020CL XXXXXXXXX”under the “Available devices”.

7. Click the found device and you will

hear three beeps after certain

connecting time. The status will be

changed to “Connected to input

device”. Now your Argox Cordless

Scanner successfully connects

with your Android device.

8. Simply click the “Mini Diary”in

desktop of Android device. Click

“Tap to add text”and see the

cursor showed on the screen. Use

your Argox Cordless Scanner to

scan a barcode and the data will

show on the Mini Diary.

Note: Android system will allow both the connected input device and the

Android Virtual Keyboard working at the same time. So when you connect

an Argox Cordless Scanner with your Android device, the Android Virtual

Keyboard will be still available for your input.

Revision V3 Jun 04th, 2014

Disconnect with smart devices and reconnect to cradle

1. Power on the cradle

2. Scanner the PIN code label on the bottom of cradle

3. Scanner the Cradle Connection only barcode below

Cradle Connection only.

Related Parameter Settings

There are several related parameter settings for the AS-8020CL and AS-8520.

Cradle Connection only.

Dongle connect to PC via serial port

and PIN code input is necessary for

each connect (*).

Dongle connect to PC via serial port

and PIN code input is necessary for

the first connect only (*).

Turn off HID re-connect from scanner

to PC

HID re-connect duration from scanner

to PC (1AC01~1AC09 –10sec ~

90sec).

Disclaimer

Argox makes no warranty of any kind with regard to this publication, including, but not

limited to, the implied warranty of merchantability and fitness for any particular

purpose. Argox shall not be liable for errors contained herein or for incidental

consequential damages in connection with the furnishing, performance, or use of this

publication. This publication contains proprietary information that is protected by

reproduced or translated into any language, in any forms, in an electronic retrieval

system or otherwise, without prior written permission of Argox. All product information

and specifications shown in this document may be changed without prior notice.

Autres manuels pour AS-8520

Ce manuel convient aux modèles suivants

Autres manuels Argox Lecteur de codes-barres

Argox

Argox D2 Series Manuel utilisateur

Argox

Argox AS-8110 Manuel utilisateur

Argox

Argox PT Manuel utilisateur

Argox

Argox AS-8512 Manuel utilisateur

Argox

Argox AS-8312 Manuel utilisateur

Argox

Argox P4 Series Manuel utilisateur

Argox

Argox AP-9800 Manuel utilisateur

Argox

Argox D2 Series Manuel utilisateur

Argox

Argox Xellent X-3200ZE Manuel utilisateur

Argox

Argox AS-8120 Manuel utilisateur

Argox

Argox AS-8000 Series Manuel utilisateur

Argox

Argox P4 Series Manuel utilisateur

Argox

Argox P4 Series Manuel utilisateur

Argox

Argox AS-9600 Manuel utilisateur

Argox

Argox OS-214 plus Manuel utilisateur

Argox

Argox amigo series Manuel utilisateur

Argox

Argox AS-9500 Manuel utilisateur

Argox

Argox AS-8520 Manuel utilisateur

Argox

Argox Smart CP-2140 Manuel utilisateur

Argox

Argox OS-214 plus Manuel utilisateur

Argox

Argox AI-6800 Manuel utilisateur

Argox

Argox OS-314plus Manuel utilisateur

Argox

Argox OS-214 plus Manuel utilisateur

Argox

Argox AS-9600 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur