Arenti OP1 Manuel utilisateur
Smart Outdoor Pan&Tilt Camera
QUICK GUIDE
OP1
Quick start guide
1. Packing list
2. Product description
3. Installation
4. Product configuration
5. Specification
6. Legal notice
1. Packing list
2. Product description
EN
Power adaptor X1 Power cable X1
Quick guide X1
1. Microphone
2. Speaker (back)
3. LED indicator
4. White light
5. IR light
6. Micro USB
7. Reset
8. SD card slot
Camera X1
Screw package X1Bracket X1
Silicone plug for
power cable X1 Silicone plug for
power cable
1
2
3
4
5
6
7
8
3. Installation
LED indicator of camera:
Flashing red light (slow)
Flashing red light (fast)
Fixed red light
Fixed blue light
Wait for network config
Connecting the network
Camera is malfunctional
Camera network is normal
Notice
To reset the device, press and hold the reset button
for 5s. The camera beeps when the operation is
completed.
EN
Wall Mounting
①
②③④
④
⑤
1. Take the camera power cable through the bracket.
2/3. Install the expansion screws and mounting screws.
4. Insert the camera into the bracket and point the
camera black arrow at the bracket Unlock logo.
5. Rotate the camera until it snaps into the bracket
with the black arrow pointing at the Lock logo.
EN
Cell Mounting
④
④
⑤
①
②
③
1. Take the camera power cable through the bracket.
2/3. Install the expansion screws and mounting screws.
4. Insert the camera into the bracket and point the
camera black arrow at the bracket Unlock logo.
5. Rotate the camera until it snaps into the bracket
with the black arrow pointing at the Lock logo.
4. Product configuration
Scan QR code to download and install the Arenti APP.
You can also search "Arenti" on App Store (IOS) or Play
Store (Android).
COMPATIBLE WITH AMAZON ALEXA & GOOGLE ASSISTANT
Registration
Open the App. If you are a new user, tap to create a
account and follow the prompts to complete setup.
Note: You must agree with the Privacy Agreement.
Pairing
Open APP home page, Click "+" or "Add" and select
icon according to actual camera.
Power on the device. For about 30 seconds, camera
will emit start-up tone and LED indicator will flash
red slowly.
Note: When pairing, please put the camera and mobile
phone close to the router. If camera is not in the red slow
blinking after 30 seconds of powering on, press and hold the
reset button for 5 seconds to reset, and then configure the
network again.
EN
If you have multiple cameras, please follow steps
again to add one by one. To change Wi-Fi network,
please restore the camera to factory settings and
add again.
Notice
Select the Wi-Fi network and input the password,
and then click "Next". Make sure that phone has
connected to a fluent and steady Wi-Fi already.
Scan the QR code in your phone with the camera
and click "Next", when the camera comes out "dong
dong dong" and LED indicator becomes solid blue.
Scan the
QR code
of APP
If no device is found and the pairing process is not
successful, please check below instructions:
1. Wi-Fi network is 2.4GHz/5GHz.
2. Wi-Fi password entered is correct and the same
Wi-Fi network is used on the mobile device.
3. Camera is in pairing mode.
4. Check your WiFi for network activity.
EN
5. Specification
Product name
Resolution
Angle of view
IR Distance
Pan/Tilt
Working temp
Local storage
Power
Consumption
Supported phone OS
Wireless connection
OP1
2560 x 1440
95°
Up to 10m
0°~355° (Pan); 0°~90° (Tilt)
-20°C to 50°C
Micro SD card (up to 128GB)
DC 5V, 1A
Up to 2.5W
iOS 9/Android 5.0 and above version
IEEE802.11 a/b/g/n (2.4GHz&5GHz)
Support
6. Legal notice
www.arenti.com
Symbols Direct current (DC)
Don't throw batteries or out of order products
with the household waste (garbage). The
dangerous substances that they are likely to
include may harm health or the environment.
Make your retailer take back the products or
use selective collect of garbage proposed by
your city.
Hereby, we declares that the radio equipment
type 'OP1' is in compliance with the Directive
2014/53/EU
The full test of the EU declaration of conformity
is available at the following Internet address:
www.arenti.com
EN
1. Lista de embalaje
2. Product description
ES
Guía de inicio rápido
1. Lista de embalaje
2. Descripción del
producto
3. Instalación
4. Configuración del
producto
5. Especificación
6. Aviso legal
Adaptador de
corriente X1 Cable de
alimentación X1
Guía rápida X1
1. Micrófono
2. Altavoz (atrás)
3. Indicador LED
4. Luz blanca
5. luz infrarroja
6. micro USB
7. Restablecer
8. Ranura para tarjeta SD
Cámara X1
Paquete de
tornillos X1
Soporte X1
Enchufe de silicona para
cable de alimentación X1 Tapón de silicona para
cable de alimentación
1
2
3
4
5
6
7
8
3. Instalación
Indicador LED de la cámara:
Luz roja intermitente (lenta)
Luz roja intermitente (rápida)
Luz roja fija
Luz azul fija
Esperar a la configuración de la red
Conectando la red
La red no funciona correctamente
La cámara funciona correctamente
Aviso
Para reiniciar el dispositivo, mantenga pulsado el
botón de reinicio durante 5s.
La cámara emite un pitido cuando finaliza la operación.
ES
Montaje en pared
①
②③④
④
⑤
1. Pase el cable de alimentación de la cámara por el soporte.
2/3. Instale los tornillos de expansión y los tornillos de montaje.
4. Inserte la cámara en el soporte y apunte la flecha negra
de la cámara hacia el logotipo "Desbloquear" del soporte.
5. Gire la cámara hasta que encaje en el soporte con la
flecha negra apuntando al logotipo de candado.
Table des matières
Langues :
Autres manuels Arenti Caméra de sécurité
Arenti
Arenti GO1 W1 Manuel utilisateur
Arenti
Arenti P2Q Manuel utilisateur
Arenti
Arenti GO1 Manuel utilisateur
Arenti
Arenti INDOOR 1 Manuel utilisateur
Arenti
Arenti INDOOR1 Manuel utilisateur
Arenti
Arenti OUTDOOR1 Manuel utilisateur
Arenti
Arenti G01 Manuel utilisateur
Arenti
Arenti POWER1 Manuel utilisateur
Arenti
Arenti Laxihub P2 Manuel utilisateur
