Archos Cesar MPM Manuel utilisateur
-1-
CESAR MPM
USER GUIDE
VER 1.0
100 831
Install Guide –English ......................................p. 2
Guide d'installation –Français .......................p. 15
Betriebsanleitung –Deutsch ..........................p. 28
Manual del usuario –Español ........................p. 42
Manual dell’ utilizzatore –Italiano ..................p. 56
-2-
Quick Start Guide
Contents
1. Overview.......................................................5
2. Install the Hardware......................................6
3. Install the Software Driver on PC :
A. PCMCIA Interface Installation...................7
B. USB Interface Installation .........................8
C. USB 2.0 Interface Installation ...................8
D. FireWire Interface Installation...................9
4. How to open and close the lid of the
CESAR Drive ..............................................10
5. Batteries......................................................11
6. CDR-CRDRW burning :
A. Install the Nero Burning ROM Software (PC)..12
B. Using CESAR with Nero .................................12
C. Reading and burning speed............................13
7. Customer Support.......................................14
CLASS 1 LASER PRODUCT
DANGERINVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
-3-
Warranty and Limited Liability
This product is sold with a limited warranty and specific remedies are available
to the original purchaser in the event the product fails to conform to the limited
warranty. Manufacturer’s liability may be further limited in accordance with its
sales contact.
In general, the manufacturer shall not be responsible for product damages
caused by natural disasters, fire, static discharge, misuse, abuse, neglect,
improper handling or installation, unauthorised repair, alteration or accident.
In no event shall the manufacturer be liable for loss of data stored on disk
media.
MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES. EVEN IF INFORMED OF
THE POSSIBILITY THEREOF IN ADVANCE.
Please see your sales contract for a complete statement of warranty rights,
remedies and limitation of liability.
Further, the warranty does not apply to:
•Damages or problems resulting from misuse, abuse, accident, alteration
or incorrect electrical current or voltage.
•Any product with a tampered-with or damaged warranty seal or serial
number label.
•Any product without a warranty or serial number label.
•Any batteries and all consumable items delivered with or in the
equipment..
Warnings and Safety Instructions
CAUTION
To prevent risks of electric shock, this unit must only be opened by qualified
service personnel.
Power off and disconnect the power supply cable before opening the unit.
WARNING
§To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
§Use of this product is for personal use only. Copying CDs or downloading
music files for sale or other business purposes is or may be a violation of
copyright law.
-4-
FCC Warning Statement
FCC Compliance
This equipment has been tested and found to comply with the requirements
for a class B digital device pursuant to Part 15 of the FCC regulations. These
requirements are designed to provide reasonable protection against harmful
interference in a residential area. This equipment generates, uses and can
radiate radio frequency energy. If not installed and used in accordance with
the manufacturer’s instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular environment. If this equipment does cause harmful
interference, to radio or television reception which can be determined by
turning the equipment on and off. The user is advised to try to correct the
interference by one or more of the following methods :
•Reorient or relocate the receiving unit's antenna;
•Increase the distance between the equipment and the receiver;
•Connect the equipment to a different power outlet other than the one
where the receiver is connected;
•Consult a certified television or radio technician for assistance.
CAUTION : Any changes or modifications not expressly approved by the
manufacturer of this device will void the user's authority to
operate the equipment.
FCC Part 15 -Operation is subject to the following two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received including interference
that may cause undesired operation.
Copyright Notice
Copyright ARCHOS © 2001 -All rights reserved.
This document may not, in whole or part, be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable form
without prior consent, in writing, from ARCHOS. Windows 95, Windows 98,
Windows 98 SE, Windows Me, Windows 2000, Windows XP, Mac OS are
trademarks of Microsoft Corporation and Apple Inc. All rights reserved. All
brands and products names are registered trademarks and the property of
their respective owners. Specifications are subject to change without
notification. Errors and omissions excepted. Images and illustrations may not
always match contents.
-5-
1. Overview
Low Batteries
Drive Busy
Power On
Eject
Mechanical eject
LID
Swappable
Interface
AC/DC adapter
LINE OUT
Batteries
door
Batteries
-6-
2. Install the Hardware
NOTE: DO NOT try to open the lid of the CESAR until the drive is
fully installed into a computer. The lid may be locked and
CANNOT be opened at this stage.
NOTE : First use require 4 hours of Batteries charging.
•Plug in the power cable into the
Power Socket at the back of your
CESAR.
•Plug the AC/DC adpter into
anelectrical outlet.
•Verify that the green “ON” LED is turn
ON.
•After 4 hours of batteries charging,
connect the interface cable to the
connector at the back of the
CESAR drive.
-7-
3..Install the Software Driver on PC
Using CESAR for the first time requires a driver installation,
depending on the version of interface (PCMCIA, USB, USB2 or Fire
Wire). Each driver installation is different.
A. PCMCIA Interface Installation
NOTE : For the PCMCIA interface, default Windows driver
are used.
The floppy disk driver is not required for this installation.
Windows 95, Windows 98, Windows 98SE & ME :
•Turn on your system and wait for Windows to finish booting.
•Insert the PCMCIA card (Archos logo face up) into an open
PCMCIA slot in your notebook.
•A “New Hardware Found” window will guide you through
installation of driver. When prompted for driver disk,
uncheck all boxes. Then click Next.
•For Windows 98 (4.10.1998) choose “The updated driver
recommended” and click Next:
Windows 2000 :
•Turn on your computer and wait for Windows to finish
booting.
•Insert PCMCIA card (Archos logo face up) into an open
PCMCIA slot in your computer.
Follow steps listed below to complete installation:
1. Found new hardware wizard will pop up. System will install
ARC ATAPI,
PCMCIA IDE/ATAPI Controller,
ARCHOS SlimCDRW 8824 and
CD-ROM Drive using standard Windows drivers.
No driver files will be needed from Archos.
2. You must restart your computer before the new settings will take
effect.
-8-
B. USB Interface Installation
NOTE : using USB ports repeated on some peripherals
(such as keyboards).
May cause quick discharge.
Windows 98SE -Windows ME & Windows 2000 :
•Turn on your system and wait for Windows to finish booting.
•Insert the driver floppy disk into the floppy disk Drive
•Insert USB cable to an open USB port on your computer.
Follow steps listed below to complete installation:
•A “New Hardware Found” window will guide you through
installation of driver. When prompted for driver disk, Check
"Floppy disk drives” box, and uncheck all other boxes. Insert
Install Disk in floppy drive then click Next.
C. USB 2.0 Interface Installation
NOTE : using USB ports repeated on some peripherals
(such as keyboards).
May cause quick discharge.
Windows 98SE :
•Turn on your computer and wait until it has finished booting.
•Connect USB end of USB cable to a free USB port on your
computer
•A “New Hardware Found” window will guide you through
installation of driver. When prompted for driver disk, Check
"Floppy disk drives” box, and uncheck all ot
-9-
Windows ME & Windows 2000 :
No install disk is needed.
•Turn on your computer and wait until it has finished booting.
•Connect USB end of USB cable to a free USB port on your
computer
•A “New Hardware Found” window will guide you through
installation of driver. Microsoft “USB Mass storage” drivers will
be automatically installed.
D. FireWire Interface Installation
Windows 98SE, Windows ME & Windows 2000 :
No install disk is needed.
•Turn on your computer and wait until it has finished booting.
•Connect FireWire end of FireWire cable to a free FireWire port
on your computer
•A “New Hardware Found” window will guide you through
installation of driver. Microsoft “USB Mass storage” drivers will
be automatically installed.
-10 -
4. How to open and close the lid of the
CESAR Drive
NOTE: Due to the design of the CESAR unit, the cover of the
CESAR drive DOES NOT eject or open automatically like
a tray CDROM would.
OPEN :
•Press firmly on the Eject
button.
•The cover will unlock.
•Wait until the CDROM
stops spinning.
•Grasp the “TABS” on
both sides of the lid and
gently lift up.
CLOSE :
•With the lid open, insert the CDROM with printed label
facing up.
•Push down gently on the cover. It will lock automatically.
•The CESAR is now ready for use.
Table des matières
Langues :
Autres manuels Archos Lecteur CD
