1. Locate the instrument on a flat and leveled location.
2. Do not move the instrument during use.
3. Check the voltage before connecting power to avoid damaging the instrument due to incorrect voltage.
4. Before connecting the power, check the rated voltage.
5. Only use accessories and components provided or approved by Hanil.
6. Only insert designated container or sample do not insert anything else.
7. Avoid using the instrument in a flammable or radioactive environment.
8. Do not insert volatile or flammable substance inside the instrument.
9. For CO2 supply, it is recommended to use gas regulator endorsed by Hanil at below 0.9 kgf/cm3 (13PSI).
Connect the gas supply correctly to avoid CO2 leakage or exceeding permitted CO2concentration range.
10. If unusual odor or smoke occurs, immediately disconnect the main power and contact Hanil Technical
Support Team.
11. Do not remain the door open for a rolonged period during use.
12. Do not rest other objects on top of or next to the instrument.
13. Avoid using organic solvent and instead use neutral detergent for cleaning.
14. Always disconnect the power supply prior to cleaning.
15. Remove water from humidity pan and unplug the power cord when the instrument is to remain unused
for an extended period.
16. All repairs and internal maintenance must be performed by qualified service personnel from Hanil.
17. Thoroughly remove any contamination when requesting repair or maintenance.
18. Do not use multiple instruments simultaneously when plugged to multi-outlets.
19. Do not touch instrument or power plug with wet hands.
20. Do not apply excessive force to the instrument.
21. Contact Hanil regarding instrument repair.
