Aquagarden 2000 Manuel utilisateur
www.interpetcentral.com
Instant solution for a
clear and beautiful pond
inpond 5 in 1
2000, 3000, 6000
6 in 1
9000
Congratulations on buying an Aquagarden Inpond Filter.
Manufactured with advanced technology to
create a clean and healthy pond for your fish.
IMPORTANT
Please attach proof of purchase to this manual and file in a safe place.
Pages 1 - 19 Pages 20 - 39 Pages 40 - 59
inpond 5 in 1
2000, 3000, 6000
6 in 1
9000
GETTING TO KNOW YOUR INPOND 2000
1
2
3
4
5
6
7
8
9
10 11 12
1
No. Part Description Spare Code
1. Green Foam 1054690
2. Polymer Wool 1054690
3. Ceramic Media 1 0 5118 7
4. Pl 5W UVC Lamp 1041041
5. Impellor Complete 1041454
6. LED Spot Light O-ring 1054706
7. LED Lamp 1w 1054706
8. Ball Joint Socket 1054713
9. Black Extension pipe 1054713
10. Water Bell Large 1054713
11. Super Daisy 1054713
12. Daisy 1054713
GETTING TO KNOW YOUR INPOND 3000
No. Part Description Spare Code
1. Coarse Foam 1051170
2. Medium Foam 1051170
3. Polymer Wool Pad 1051166
4. Ceramic Media 10 5118 7
5. PL 5w UVC Lamp 1041041
6. Impellor Complete 1017800
7. LED Lamp 0.76w 1051330
8. Daisy 1017763
9. Super Daisy 1017763
10. Water Bell Large 1017763
2
1
2
3
4
5
6
7
8
9
10
GETTING TO KNOW YOUR INPOND 6000/9000
No. Part Description Spare Code
1. Coarse Foam 10517 74
2. Medium Foam 10517 74
3. Polymer Wool Pad 1051166
4. Inpond 6000 Impellor Complete 1051781
Inpond 9000 Impellor Complete 1050333
5. LED Lamp 0.76w 1051330
3
1
2
3
4
5
GETTING TO KNOW YOUR INPOND
FEATURES
•Everything needed for a clear and healthy pond, combined efficient pump and
filtration package
•Low voltage pump/filter includes:
• 3 attractive fountain features • mechanical & biological filter
• polymer wool cartridge • UV clarifier
•All models include a night time LED spotlight, with pivoting feature (3000/6000/9000 only)
FLOW RATE
1.5m 79 ltrlhr 200 ltrlhr 835 ltrlhr
1.0m 190 ltrlhr 300 ltrlhr 870 ltrlhr 1626 ltrlhr
0.5m 454 ltrlhr 520 ltrlhr 1250 ltrlhr 2371 ltrlhr
0m 650 ltrlhr 700 ltrlhr 1500 ltrlhr 3000 ltrlhr
2000 3000 6000 9000
MODEL
Model &
Pond Size
Category >75cm deep,
shade >75cm deep,
fish, shade Shallow,
fish, shade >75cm deep,
fish, sun Shallow,
fish, sun Shallow,
Koi, sun
Filter &
Waterfall
@75cm high
Fountain,
filter waterfall
@75cm high
2000
SMALL
POND
2000 ltrs 1334 ltrs 1000 ltrs 1000 ltrs 750 ltrs 375 ltrs N
/
A N
/
A
3000
STANDARD
POND
3000 ltrs 2000 ltrs 1500 ltrs 1500 ltrs 112 5 ltrs 562 ltrs N
/
A N
/
A
6000
MEDIUM
POND
6000 ltrs 4000 ltrs 3000 ltrs 3000 ltrs 2250 ltrs 112 5 ltrs N
/
A N
/
A
9000
LARGE
POND
9000 ltrs 6000 ltrs 4500 ltrs 4500 ltrs 3375 ltrs 1687 ltrs 14cm (5.5”)
2685 ltrs 10cm (3.9”)
1879 ltrs
4
The power supply must meet the specification of the product.
Inpond Pump & UVC
The electric cables are permanently connected and sealed in the motor body and UVC
lamp holder. If the supply cable of the pump or UVC is damaged, the part must not be used
The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped
Do not use the supply cable of the pump or UVC to lift the filter as this may cause damage.
For permanent installations to the mains supply, it is necessary to conform to the regulations
of the local electricity authority ad this would include the use of a metal or plastic conduit to
protect the cable.
Attention has been drawn to the fact that special rules may exist concerning the installation
of your pond pump and UVC (i.e. local building regulations).
These pump and UVC units must not be used in swimming pools or areas where people are
in contact with the water.
Always disconnect the mains electricity supply whilst the equipment is being installed,
repaired, maintained or handled. Consult a qualified electrician if in any doubt about wiring
this product to the main supply.
WARNING - All Inpond models must be used with an RCD
A Residual Current Device (RCD), also known as the Residual Current Circuit
Breaker (RCCB), with a tripping current not exceeding 30mA must be installed
in the supply circuit.
A means of disconnection from the supply having a separation of at least
3mm in all poles must be incorporated in the fixed wiring.
Warning - The inpond pump is provided with a thermal cut out that
temporarily switches of the pump in case of overheating and the pump may
automatically restart.
UVC warning – Dangerous Ultra Violet Radiation. The rays from the UVC lamp
are harmful to eyes and skin.
Always turn off the UVC electrical supply before any maintenance.
To protect the UVC starter, never immerse in water. Locate the UVC starter
a minimum of 1 metre from the pond edge.
ELECTRICAL INSTALLATION
5
UVC Lamps & quartz sleeve maintenance
The UVC lamp must be replaced every 6 months / once a season. It is recommended that
the lamp is replaced in the spring.
The quartz sleeve can become covered in lime scale build up in hard water areas.
This should be carefully removed from the quartz sleeve and cleaned with a soft cloth.
A wet test must be carried out after maintenance to ensure there are no leaks before the
UVC is reconnected to the power supply.
Wet testing the UVC
Testing/replacing the UVC lamp
See Page 7 for illustration
1. Unlock the green UVC electronics cap.
2. Inspect the UVC cap and Quartz sleeve for water leaks.
3. Then unlock the yellow quartz sleeve end cap and unplug the lamp to replace if desired.
4. If there are no signs of leakage reverse the procedure ensuring that the quartz sleeve
O-ring is in place.
5. Ensure the yellow quartz sleeve cap and the green UVC electronics cap are firmly
secured by making sure the two locked positions are in direct line of each other.
See alignment diagram (5a).
Warning - 1) Always turn off the power before any maintenance to the UVC
section, 2) Always view the UVC lamp through the viewing window on the UVC
Chamber, 3) Direct exposure to UVC light can damage your eyes and skin.
Caution - The inpond UVC has been fitted with a magnetic safety switch. 1) Do not
remove unit with power turned on, 2) Do not place near strong magnetic fields.
IMPORTANT - A wet test of the UVC under operating conditions must be carried out
before the UVC or electrical supply is installed. Connect the UVC to the inpond follow-
ing all installation instructions. After running for 24 hours check for leaks.
IMPORTANT - Ensure that the mains supply is switched off and the power is isolated
before removing the UVC cover.
UVC INSTALLATION
6
6. The unit is protected by a magnetic safety switch that prevents the UVC light from
illuminating when the cover is removed even if the power is on.
7. In order to check that the UVC lamp is operating see page 6 on how to view your
UVC lamp.
UVC INSTALLATION
1
2
4
32
5a
Warning - Direct exposure to UVC light can damage your eyes and skin.
7
INSTALLATION
Tip: Ensure that any
fountain or feature fitted
does not empty water out
of pond/water feature.
Adjusting
Flow
Control
600/900 series
Locating your Inpond
The inpond filter should be located on a firm and level base in the pond/water feature in a
depth of at least 10cm, but no more than 1.25m for the 3000 or 1.5m for the 2000, 6000
and 9000 models.
Fountain
Make sure there is ample cable. Place product in desired location.
Using the pipe adjust so that the fountain head is above the surface of the pond.
Fountain height can now be adjusted, see the diagrams for each model below.
Bell
Fountain
8
Ce manuel convient aux modèles suivants
3
Table des matières
Langues :
Autres manuels Aquagarden Pompe de bassin
Manuels Pompe de bassin populaires d'autres marques
TeichTip
TeichTip Sunsun Bio Pond Filter Set Manuel utilisateur
Hozelock Cyprio
Hozelock Cyprio Cascade 5500 Manuel utilisateur
Hozelock Cyprio
Hozelock Cyprio Aquaforce Series Manuel utilisateur
HEISSNER
HEISSNER SPF 150-00 Manuel utilisateur
AquaScape
AquaScape AQUAFORCE 4000-8000 Instructions d'utilisation
Messner
Messner system-X 1501 Manuel utilisateur