Appro VS-2401 Manuel utilisateur
Before trying to connect or operate this product, please read this manual completely.
INSTALLATION &
OPERATION MANUAL
H.264 Video Server
Table Of Contents
SAFETY PRECAUTIONS .............................................................................3
1. PRODUCT FEATURES.............................................................................4
1.1 PRODUCT INSTRUCTIONS.....................................................................4
1.2 PRODUCT FEATURES ...........................................................................5
2. DESCRIPTION OF THE FRONT/REAR VIEW.........................................6
2.1 FRONT PANEL......................................................................................6
2.2 REAR PANEL........................................................................................7
2.3THE DI/DO SCHEMATIC .......................................................................8
2.4THE USB FUNCTION ............................................................................9
3. INSTALLATION ......................................................................................10
3.1 CONNECTING WITHA CAMERA ..................................................10
3.2 UPDATING SYSTEM SOFTWARE.................................................10
4. Network Configuration..........................................................................12
4.1 CABLE CONNECTIONS........................................................................12
4.2 CONFIGURE YOUR VIDEO SERVER NETWORK SETTINGS......................12
4.2.1 Enable DHCP Function ...................................................................................................12
4.2.2 Set IPAddress..................................................................................................................13
4.3 TCP/IP COMMUNICATION SOFTWARE.................................................14
4.4 TCP/IP INSTALLATION .......................................................................16
4.5TCP/IP CONFIGURATION SETTING.......................................................17
4.6 CONNECTION TESTING.......................................................................18
5. Operating Instructions for Image Software and Network..................20
5.1 MICROSOFT INTERNET EXPLORER ......................................................21
5.1.1 Connecting the Video Server..........................................................................................21
1
5.1.2 Live Video.......................................................................................................................22
5.1.3 Setup ...............................................................................................................................26
6. ADVANCED OPERATION......................................................................75
7. SPECIFICATIONS...................................................................................79
APPENDIX 1. –How to run Video Server UPnP.......................................80
APPENDIX 2. –Register as a DDNS member ..........................................91
APPENDIX 3. –Table of MPEG4 Bit Rates for the Video Server............95
APPENDIX 4. –PoE Installation Method ..................................................96
2
SAFETY PRECAUTIONS
All the following safety and operational instructions to prevent harm or injury to the operator(s) or
other persons should be read carefully before the unit is activated.
To prevent fire or shock hazard, avoid exposing this unit to rain or moisture.
Do not block ventilation openings.
Do not place anything on top of the unit that might spill or fall into it.
Do not attempt to service this unit yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Please refer all servicing to
your distributor / retailer.
Do not use liquid cleaners or aerosols for cleaning.
To prevent fire or electric shock, do not overload wall outlets or extension cords.
This unit must be grounded to reduce the risk of electric shocks.
Indoor use only.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
WARNING
3
1. PRODUCT FEATURES
1.1 Product Instructions
The Video Server Encoder is a versatile solution that allows you to make the most of your existing
analog surveillance infrastructure. The Video Server is a standalone system with a built-in video
encoder that converts an analog camera into a full-featured IP-based system. The Video Server
can be remotely accessed and controlled using a Web browser over an Intranet or the Internet.
The Video Server’s Video Encoder makes it possible to integrate a pre-existing analog
surveillance infrastructure into a fully-functional IP surveillance system. The Video Server is an
ideal choice for banks, airports, factories, government buildings, prisons, and traffic surveillance
applications - any location where surveillance equipment is already installed and functioning.
This video server adapts Texas Instrument's (TI's) newest digital media processor -- the
TMS320DM 365 for efficient image operation, while also offering simultaneous triple-codec
( H.264 / MPEG-4 / MJPEG ) video compressions with the highest resolution of Full D1, at 30 / 25
frames per second in the NTSC / PAL systems, respectively. In addition, users based on different
bandwidths can choose multi-profile video streaming at different resolutions.
The video server provides stable, reliable and convenient network surveillance. It safely
downloads automatic video codec and other components, and lets you set up the control
settings very easily. It provides UPnP features as well. Its USB interface is for basic network
setting and updating. The SD card slot supports alarm and event recording and updating.
Furthermore, this encoder board comes with the Power over Ethernet (PoE) function, and its
RS-485 interface can be connected with all kinds of Pelco-D PTZ cameras.
Alarm handling features provide alerts in the event of loss of video or loss of network connection.
Motion alarms with configurable detection areas allow for effective surveillance and help to
mitigate the need for constant human supervision. A buffer system allows the server to capture
images to the built-in SD card slot before and after an event occurs.
We have launched this triple-codec video server for the more advanced digital surveillance
solutions demanded by our clients. We believe this unit is the right answer to your Network
surveillance problems. You will find it practical, precise and indispensable.
4
5
1.2 Product Features
1. Real-time synchronization of the video and audio functions.
2. Digitally transform existing hardware.
3. Simultaneous H.264 / MPEG-4 / MJPEG video compression formats.
4. Manages, records, and views video with ease.
5. Simplifies surveillance with advanced alarms and events.
6. The installation of a codec or execution file is not necessary. The device will
automatically send the codec or any component to a PC if the latter requires it.
7. PoE function (Power over Ethernet/ IEEE 802.3af).
8. Built-in website server and network connection.
9. Built-in SD card slot for copying images to an SD card.( support jpeg/ avi file )
10. USB interface for setup.
11. Multi-zone motion detection for your channel.
12. Supports 10 users with 3 levels of authority.
13. Live images for viewing in any network - connected PC.
14. Operation-status record log.
15. Audio function included (two-way audio).
16. MDIX protocol recognizing both the normal and crossover cables, either of which can
connect up with a video server.
17. 1-channel video-in to connect to every kind of analog camera.
2. DESCRIPTION OF THE FRONT/REAR VIEW
2.1 Front Panel
1234
5
1. Plug Inlet: A DC 12V inlet that connects to an external power supply.
2. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps
Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the
same cable as used for the network connection.
3. SD indicator: The green light indicates the SD card cannot be removed.
4. SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing
critical images.
5. USB port: The user can use a USB device cable to connect the Video Server to the USB port
on the PC.
6
2.2 Rear Panel
123456
1. AUDIO IN: The connector is used to connect the audio output from other devices to the
Video Server.
2. AUDIO OUT: Provides the Video Server’s audio signal to a speaker or stereo.
3. Video in connectors: The BNC connector is used to connect to the video output from the
camera.
4. ALARM I/O: This is an 8-PIN connector including the DIGITAL IN/OUT and RS-485 items
for connecting with external devices.
5. RESET: Recover to factory default.
6. POWER indicator: Indicates the power status of the unit.
7
2.3 The DI/DO Schematic
DI Receives signals from a reed switch, vibration sensor, or any other
external security device.
DO Connects to an alarm or buzzer.
485+/485- Connects to an RS-485 interface for controlling auxiliary equipment
such as an external camera enclosure for pan, tilt, and zoom
functionality.
8
Table des matières
Autres manuels Appro Serveur
