Apera Instruments LabSen843 Manuel utilisateur

LabSen 843 Strong Base pH Electrode

User Manual

LabSen electrochemical sensors are premium pH electrode with manufacturing technology

and key components imported from Switzerland. LabSen843 adopts special H glass

membrane, suitable for high temperature and strong base solution.

This probe has following features:

⚫ Impact-resist membrane (see the right picture)，there is no danger of

electrode breakage during normal use.

⚫ Tested in high temperature and strong base condition, the service life of

the probe is 5 times longer than normal electrodes (test condition: 60°C,

1M NaOH solution).

⚫ Blue gel inner solution, does not flow and will not cause bubble.

⚫ Silver ion trap reference prevents the contamination of the junction when

testing sample contains sulfides and proteins.

1 Technical Data

Measuring Range

(1 ~ 14) pH

Electrolyte

3M KCl

Temperature Range

(0 ~ 130) °C

Soaking Solution

3M KCl

Shaft Material

Lead-free Glass

Temperature Probe

NTC 30KΩ

Membrane Typ

Electrode Dimension

(Ø12×120) mm

Membrane Resistance

<500MΩ

Connector

BNC/RCA

Reference

Silver Ion Trap

Cable

Ø5×1m

Junction

Ceramic

2 Usage and Maintenance

2.1 When measuring, please unscrew the bottle cap, pull out the electrode and rinse it with

deionized water. After using, please put the electrode back into the bottle and screw tight the

cap.

Before pulling out or putting back the electrode,

make sure to fully loosen the blue cap on the

storage sleeve so that the electrode can move in

and out smoothly.

2.2 Prior to measurement, remove the rubber plug to maintain pressure of the reference solution,

keep consistent flow rate of reference solution and stable potentials of junction.

2.3 Measurement suggestions:

(a) The electrode can measure strong base solution lighter than 1mol/L (pH=14), with good

repeatability and stability. Stirring is recommended while measuring, to speed up stable

measurement.

(b) Wash with pure water after each measurement, and soaking and active in 3M KCL.

solution frequently. May use 1% HF solution (about 0.5mol/L) soaked for 5-8 seconds, then

soak in 3M KCL solution for more than 2 hours, and wash clean with pure water.

2.4 After a period of usage, the reference solution will running low. Whenever the level falls to 1/2

height of the electrode, add 3M KCL solution to the refilling hole by using syringe or pipette.

2.5 The connector of the electrode should keep clean and dry. If being contaminated, please clean

it with medical cotton and absolute alcohol and blow dry to prevent the short circuit of the

electrode and slow reaction of electrode.

2.6 The electrode’s measuring tip should be soaked in the soaking bottle containing certain amount

of storage solution to keep the membrane hydrated and junction unblocked. Clean the bottle

and replace the storage solution if the storage solution gets turbid and mildewed. The electrode

should never be sinked in pure water or buffer solution for long.

2.7 After 1-year of use, we recommend replacing the electrode to ensure the best accuracy.

3 Warranty

We warrant this electrode free from defects in material and workmanship and agrees to repair or

replace free of charge, at option of APERA INSTRUMENTS any malfunctioned or damaged product

attributable to responsibility of APERA INSTRUMENTS for a period of six months. Warranty period

is the time limit to provide free service for the products purchased by customers, not the service life

of the tester or electrodes.

This limited warranty does not cover any damages due to:

transportation; storage; improper use; failure to follow the product instructions or to perform any

preventive maintenance; modifications; combination or use with any products, materials, processes,

systems or other matter not provided or authorized in writing by us; unauthorized repair; normal wear

and tear; or external causes such as accidents, abuse, or other actions or events beyond our

reasonable control.

APERA INSTRUMENTS (Europe) GmbH

Address: Wilhelm-Muthmann-Str.18,

42329 Wuppertal, Germany

Phone: +49 202 51988998

Website: www.aperainst.de

Email: info@aperainst.de

Table des matières

Autres manuels Apera Instruments Équipement de test

Apera Instruments

Apera Instruments PH60-E Manuel utilisateur

Apera Instruments

Apera Instruments 28APE190027 Manuel utilisateur

Apera Instruments

Apera Instruments PH20 Manuel utilisateur

Apera Instruments

Apera Instruments GroStar GS1 Manuel utilisateur

Apera Instruments

Apera Instruments PC60 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen763 Manuel utilisateur

Apera Instruments

Apera Instruments Premium Series Manuel utilisateur

Apera Instruments

Apera Instruments GroStar GS3 Premium Manuel utilisateur

Apera Instruments

Apera Instruments ZenTest PH60-Z Manuel utilisateur

Apera Instruments

Apera Instruments TDS1 Manuel utilisateur

Apera Instruments

Apera Instruments PH20 Manuel utilisateur

Apera Instruments

Apera Instruments EC20 Manuel utilisateur

Apera Instruments

Apera Instruments Salt2 Manuel utilisateur

Apera Instruments

Apera Instruments PH20 Manuel utilisateur

Apera Instruments

Apera Instruments ZenTest PH60S-Z Manuel utilisateur

Apera Instruments

Apera Instruments 2301-C Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 833 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 751 Manuel utilisateur

Apera Instruments

Apera Instruments ORP60-Z Manuel utilisateur

Apera Instruments

Apera Instruments COND5 Manuel utilisateur

Apera Instruments

Apera Instruments TDS20 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 241-6 Manuel utilisateur

Apera Instruments

Apera Instruments Premium Series Manuel utilisateur

Apera Instruments

Apera Instruments Premium Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur