APART MASK4C Manuel utilisateur
MASK4C(T) / MASK6C(T)
Instruction manual
Instruction manual
MASK4C(T) / MASK6C(T) 3
MASK4C(T) / MASK6C(T) manual
4Design cabinet loudspeaker
Safety precautions
• Keep this manual for future reference.
• Take care of the speaker wires, they should be free of damage.
Damaged speaker wires may result in poor sound quality and
can damage amplifiers.
• No mains power shall be connected to the speakers, doing so
will damage the speaker.
• This speaker should only be serviced by qualified personnel. If
not, warranty might be void.
• Use cables of the right gauge, certainly for long runs.
• Use cables with clear colour indication and maintain polarity
throughout the whole system.
• Avoid loud feedback.
• Clean only with dry cloth.
• Do not operate near heaters or place it near other apparatus
which produce a lot of heat.
• Only use accessories specified by the manufacturer.
• Make sure the mounting surface can easily support the
speaker’s weight.
• Use only industry-accepted mounting tools and methods.
• Exposure to loud audio levels over a long time can cause severe
hearing loss.
• Don’t forget to consult the local law directions regarding
producing sound in public places.
• Please check the unit’s condition after unpacking. If the outside
of the carton box has been damaged, inform your shipper
immediately.
Instruction manual
MASK4C(T) / MASK6C(T) 5
The enduring success story
The origin of MASK loudspeakers goes back as far as 2006, when
the introduction of MASK4 and MASK6 set an industry standard for
numerous professional users all over the world. Reliability, sound
performance, an unseen design and a unique ease-of-use Intelli-
mount bracket resulted in an instant success in every major market
worldwide.
So with this essential philosophy of construction quality, reliability,
ease-of-installation and sound performance in mind the next
generation of MASK was created.
MASK4C - MASK4CT / MASK6C - MASK6CT
A designer evolution with an installer friendly revolution. MASKC
series got a subtle facelift resulting in a more mature look and feel.
Its underlying engineering evolved to an unprecedented level,
exceeding every installer’s expectations.
The patent pending ClickMount bracket is a true revolution for
installers and users alike.
Rigid constructed to withstand the most fierce conditions in which
a professional loudspeaker can be used. MASK will remain an iconic
industry standard for many years to come.
6Design cabinet loudspeaker
Features
• Timeless design
• Weather resistant (aluminium grille)
• ClickMount: click & connect
• Connectors with passthrough and 0.14 – 4 mm² solid or
stranded wire capacity
• Wall and ceiling mountable
• Integrated spirit level
• Unique 3 stage overload protection
• Asymmetric tweeter horn design
• Coated 4.25”LF driver for MASK4C(T) and 6.5” LF driver for
MASK6C(T)
• Horn loaded silk dome tweeter
• Paintable in any RAL color
• Rotatable logo
• 70W power handling for MASK4C(T) and 200W for MASK6C(T)
• 70V and 100V compatible (T versions)
• 8 ohm and 16 ohm (T) versions available
• Integrated safety nut for SAFCAB (supplied)
• The installer can mount the ClickMount and connect the
speaker cables while the speakers are still safely packed inside
the packing carton.
• Glass fibre reinforced bracket included
• Speakers designed to be used in combination with the included
ClickMount
• Incorporated 5° downward listening angle
Instruction manual
MASK4C(T) / MASK6C(T) 7
Downward listening axis
5°
5°
8Design cabinet loudspeaker
Mounting & connecting the MASK4C(T) loudspeaker
CEILING
WALL
min 145 mm
min 50 mm
speaker
wires
80 mm
vertical mounting
MASK4(T)
Instruction manual
MASK4C(T) / MASK6C(T) 9
The intelligent ClickMount mounting system helps you to install
the MASK4C(T) speaker in a safe and easy way. Please note the
minimum distance from the ceiling and wall as shown in the
drawings below:
CEILING
WALL
min 115 mm
min
20 mm
speaker
wires
80 mm
horizontal mounting
MASK4(T)
10 Design cabinet loudspeaker
CEILING
WALL
min 200 mm
min 105 mm
speaker
wires
80 mm
vertical mounting
MASK6(T)
Mounting & connecting the MASK6C(T) loudspeaker
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels APART Système stéréo
