APART MASK2 Manuel utilisateur

INFO@APART-AUDIO.COM

MANUAL

MASK2

WWW.APART-AUDIO.COM

Features

Smaller, cuter, easier… don’t be fooled by the tiny appearance…

The APart MASK2 speakers are simply amazing. No need to say more; you will hear what we

mean. Designed to t in any interior, and applicable in many situations, they will not disappoint

you. These speakers have been designed for the true music lover, with the installer in mind.

Popular applications are home hi systems, home cinema surround systems, multiroom audio

systems, convention rooms, shops, you name it…These speakers are a perfect match for any

application requiring great hi sound in small to medium sized rooms.

Special brackets are supplied with the speakers, allowing them to be mounted under various

angles to solid surfaces such as walls or ceilings.

IMPORTANT NOTES: these speakers will perform awlessly only when you follow our

amplier and system recommendations. Do not attempt to use these small speakers as

full range speakers, they are not designed to reproduce bass frequencies. We strongly

recommend the use of our matching subwoofers or matching highpass lter systems. Our

recommended subwoofers and amplier systems have special tailor made protection and

lter circuits, avoiding damage due to overloads and guaranteeing true hi experience.

These overload protection systems are incorporated in the subwoofers and ampliers,

NOT in the MASK2 speaker itself.

These speakers are NOT magnetically shielded, so if you have a CRT screen, place the speakers

at sufcient distance from the screen. Modern plasma, LCD, TFT or LED screens are insensitive

to magnetic interference, so you can install these speakers close to such devices without

limitations.

For possible and supported speaker/amp combinations, ask your dealer or take a look at our

speaker sets on our website :

www.apart-audio.com

INFO@APART-AUDIO.COM

These speakers have been carefully packed at the factory. Open the carton box and remove

the speakers from the packing. Do not use sharp objects to remove the protective bag from

the speaker. The removable grille is already in place and should not be taken off. Place the

speakers on a at surface. The mounting brackets are included in the packing, and the mounting

accessories (screws, plugs and screw caps) are located in a plastic bag underneath the protective

carton. When the product shows signs of damage caused by transportation, contact your dealer

immediately. Damage due to transport and rough handling is not covered by the manufacturers

warranty.

Unpacking

WWW.APART-AUDIO.COM

It is recommended to point the center of the speaker to the center of the

dedicated listening area, but this is not so critical because Mask 2 has a wide

dispersion range. Before mounting the bracket on the wall or ceiling, test-t

the speaker-bracket combination to see if you reach the desired mounting

angle. Determine the position of the mounting holes using the bracket as a

template and drill the holes.

Using the appropriate mounting hardware, mount the bracket to the surface.

Mounting materials for solid brick walls are included. For other materials you

may need other hardware, available from your local hardware store.

Once all screws have been securely tightened, place the included screw

covers in place.

The angle can be determinded by the position of the bracket base and the

position of the H-hook on the half-sphere ball. The factory default force-

setting of this central screw is adjusted for moving the H-hook over the

semi-sphere with or without the cabinet being over the hook. It is allowed

to adjust the angle by moving the cabinet and the H-hook together after the

mounting has been realized. You can fasten or loosen the central screw to

inuence the turning force of the H-hook.

Wall mounting the speaker

Now slide out the rubber security piece from the back of the speaker, slide

the speaker on the H-hook of the mounting bracket. Slide the rubber part

back in place to lock and secure the cabinet. Plug the euroblock connector

into the speaker.

INFO@APART-AUDIO.COM

Corner mounting the speaker

Ceiling mounting the speaker

Consider to hide the speaker cable by guiding it through one of the 4 pre-cut cable-

entries on the sides of the bracket base. Such a pre-cut cable entry can be easily cut

away. From here you can lead the speaker wire to the connector.

When you need to mount the speakers under a very wide or difcult angle, rst

rotate the base plate by 45 or 90 degrees in order to get the maximum tilt angle into

the right direction. Another method of getting a special angle, especially for ceiling

mouting, is to turn the H-hook by 180°.

Now slide out the rubber security piece from the back of the speaker, slide the

speaker on the H-hook of the mounting bracket. Slide the rubber part back in place to

lock and secure the cabinet. Plug the euroblock connector into the speaker.

Using the appropriate mounting hardware, mount the bracket to the ceiling. Mounting materials for solid

brick walls are included. For other materials you may need other hardware, available from your local

hardware store. Slide the speaker onto the mounting bracket in such a way that it won’t slide off even

without the rubber locking piece in place. After you slide on the speaker, slide the rubber part back in place

to lock and secure the cabinet. Plug the euroblock connector into the speaker.

WWW.APART-AUDIO.COM

Testing the installation

Connecting the speaker

Before you can enjoy your new speakers, recheck all connections. Correct any loose connections and

avoid ‘naked’ wires causing short circuits, before using the system. Short circuits may cause damage

to other system components.

Enjoy your new MASK2 speakers !

Remove the euroblock connector from the speaker and

connect the speaker wire to the euroblock connector.

Mind the polarity marked on the back of the speaker: + is

positive, - is negative. Most speaker wires have a colour

code. Respect the colour code starting at your amplier

up to your speakers. For distances up to 20 meters,

you can use 0.75 mm² speaker wire without any loss of

performance. For longer distances, use thicker wire. The

euroblocks accept wires up to 1.5 mm² and up to 2.5 mm²

when using special so called ‘ cable shoes’.

INFO@APART-AUDIO.COM

Technical specifications

Speaker type Full range 2.5” speaker

Nominal impedance 8Ω

Frequency range 120 - 20000Hz (without subwoofer)

Program power 50 Watts RMS

(using a 150 Hz/12 dB/octave highpass filter.)

Recommended amplifier power / channel 10 - 110 Watts (with matching subwoofer)

Dimensions H x W x D mm 94 x 82 x 108 (without mounting bracket)

Distance from wall approx 30mm using included brackets

Shipping weight 1300g (1 speaker pair with accessories)

Net weight 440g

Shipping dimensions mm 130 x 146 x 310

Accessories (supplied) Mounting bracket, mounting hardware, screws

and screw covers.

WWW.APART-AUDIO.COM

Company names, product names, and names of formats etc. are the trademarks or

registered trademarks of their respective owners.

Autres manuels pour MASK2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels APART Intervenants

APART

APART CM6E Manuel utilisateur

APART

APART CM4T Manuel utilisateur

APART

APART CMSUB8 Manuel utilisateur

APART

APART SDQ5Pir Manuel utilisateur

APART

APART SDQ5Pir Manuel utilisateur

APART

APART CM20T Manuel utilisateur

APART

APART CM5EH Manuel utilisateur

APART

APART COLS41 Manuel utilisateur

APART

APART CM1008 Manuel utilisateur

APART

APART CM8E Manuel utilisateur

APART

APART CMAR5T-W Manuel utilisateur

APART

APART MASK12T Manuel utilisateur

APART

APART CM608 Manuel utilisateur

APART

APART CM20DTS Manuel utilisateur

APART

APART OVO5P-W Manuel utilisateur

APART

APART VINCI 7 Manuel utilisateur

APART

APART lsc4s Manuel utilisateur

APART

APART MPBD20-G Manuel utilisateur

APART

APART CM6QFT Manuel utilisateur

APART

APART OVO5T Manuel utilisateur

APART

APART CMX20T Manuel utilisateur

APART

APART KUBO3T Manuel utilisateur

APART

APART MASK SERIES Manuel utilisateur

APART

APART OVO5P-W Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur