Introduction
Thank you for buying the Apart MASK12 speaker. With this new
member of the MASK series, we have once again broken new
ground in sonic performance and installer convenience. The
MASK12 speaker is meant for fixed indoor installations. Available
in 8 ohms and 100 volt, MASK12 can be used in many full range
applications where a medium to high sound pressure level is
required.
The multi-angle plywood cabinet, equipped with 14 rigging points
for shoulder eye bolts, and the optional wall/ceiling U-bracket allow
you to safely install the speaker in many different positions, be it in
a horizontal or vertical position, close to the ceiling or at the wall.
With a weight of only 19.2 kgs, the speaker is easy to install.
As usual, these Apart speakers will convince you in terms of sound
quality, reliability and setup versatility. Paired with our Revamp
2600 amplifier, your sound system will be taken to a new level of
performance.
Please read this manual carefully before using the product. This
will give you the necessary product and installation instructions to
assure a seamless installation and non-compromised overall sound
quality.
Unpacking
Upon receipt of this product, check the carton and packing
materials for any damage caused by transport. Carefully unpack
the product and check that all parts are present and in undamaged
condition. Notify your dealer and/or the shipping company
immediately if any damage has occurred during transport. Keep
the carton and packing materials in case you have to return the
product.
