5
Security warning content
Training
a) Please read the operating and maintenance instructions carefully to be fully
familiar with all operating mechanisms and methods for operating the machine.
Master how to quickly stop and separate the operating mechanism.
b) Children can never use the machine. Adults who don't read the instructions don't
either.
c) Keep the work area attended, free of children and pets.
Preparation
a) Thoroughly inspect the area that will use the machine and remove any debris.
b) Disengage all clutches and put in neutral before starting the engine.
c) Do not operate the machine without wearing a suitable jacket. Wearing non-slip
shoes will improve stability on the slippery surface.
d) Handle fuel with care, it is flammable.
e) Use a suitable container to store fuel.
f) Do not add oil to the fuel tank while the engine is running or when the engine is
hot.
g) In case of refueling, it should be done outdoors and carefully, do not refuel indoors.
h) Before you begin, tighten the fuel tank cap and wipe up any spilled fuel.
i) When the engine is running, do not make any adjustments (except special
adjustments recommended by the manufacturer).
j) Safety glasses must be worn for any handling such as preparation, operation and
maintenance.
Handling
a) Hands and feet must not be placed near rotating parts or under rotating parts.
b) When maneuvering (or crossing) gravel pavements, sidewalks or paths should be
especially careful, guard against potential hazards, pay attention to traffic
conditions and not carry passengers.
c) After hitting the debris, stop the engine, carry out a thorough inspection to check
whether the machine is damaged, it must be repaired before restarting and
handling.
d) Always pay attention to your feet and avoid slipping or falling.
e) Once the machine has abnormal vibration, please stop the engine immediately to
find the reason. Vibration is often a precursor to the problem.
f) If the machine stops, the cleaning blade is blocked. For maintenance, adjustment
or inspection, the engine must first be stopped.
g) When the machine is unmanned, take all possible precautions: separate the PTO
shaft, lower the attachment, turn the engine to neutral stop and remove the key
from the switch.
h) Before cleaning, repairing or inspecting the machine, the engine must be stopped
and all moving parts must be stopped.
