anko 43302932 Manuel utilisateur
Instruction manual
Keycode: 43302932
Desk Fan with Holder
To ensure correct operation and avoid damage, please read this user manual carefully before
using this product.
Caution
This appliance is not intended for use by persons (including children) with reduced physical,
sensory ormental capabilities,or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Please do not put your fingers into the gaps of the fan during operation to avoid injury.
Do not use this product in damp environments or when hands are wet. If the product
accidentally enters water or other liquids, immediately turn off the fan power switch and let
it completely dry before trying again.
Do not knock or hit the product, as repeated knocking or hitting may cause internal faults in
the product.
Avoid long-term storage of the product in high temperatures and environments. Please use
at room temperature (0-40℃)
If there are malfunctions such as abnormal burning smell or slow rotation speed of the
bearing heater during use, do not continue to use it and cut off the power supply.
Battery caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Battery cannot be subjected to high or low extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
Disposal of abattery into fire or ahot oven, or mechanically crushing or cutting of abattery,
that can result in an explosion.
Leaving abattery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
Abattery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
The batteries contains materials hazardous to the environment, please discard them based
on local requirement.
Specifications
Input: 5V / 800mA(Max)
Product size: 212*106*81mm
Rechargeable lithium battery
Charging time: approx 2~3 hours
Play time: approx 1~5 hours
Product details
Installation
1)Put the fan into the holder when you need to use the fan on the desk as the position below
and make sure the fan in correct positions.
2)The installation is completed and you can start to use the fan.
How to use
Press the power switch to start to use the fan.
1st press: power on, Low speed and working time approx 5 hours
2nd press: medium speed and working time approx 2 hours
3rd press: high speed and working time approx 1 hours
4th press: power off
How to charge
The supplied USB charging cable should be inserted into the standard USB power source
rated at 5V specification. The charging time is around 2~3 hours. The indicator will keep
lighting in red during charging and turns green after fully charged.
If the battery has totally run out, the fan will not work at all.
Note:
Fully charge the appliance before first use.
Table des matières
Autres manuels anko Ventilateur
anko
anko FW-45M Manuel utilisateur
anko
anko 43295623 Manuel utilisateur
anko
anko HEG40A Manuel utilisateur
anko
anko HEGTF102 Manuel utilisateur
anko
anko LW03-19AR Manuel utilisateur
anko
anko BFT1803R Manuel utilisateur
anko
anko HEG10LED Manuel utilisateur
anko
anko HEG33 Manuel utilisateur
anko
anko HEGSM40 Manuel utilisateur
anko
anko HEG LF-03 Manuel utilisateur
anko
anko FE-40 Manuel utilisateur
anko
anko 42925538 Manuel utilisateur
anko
anko HEG66 Manuel utilisateur
anko
anko HEG LF-02 Manuel utilisateur
anko
anko HEG40 Manuel utilisateur
anko
anko HEG20MF Manuel utilisateur
anko
anko YS-1201GD BK Manuel utilisateur
anko
anko HEG8BF Manuel utilisateur
anko
anko YS-1202B Manuel utilisateur
anko
anko HEG10C Manuel utilisateur
