or safe operation
Below is very important information about how to safely operate the equipment.
Before operation, be sure to rea an fully un erstan the contents.
WARNING
Be careful about
lifting
Danger of cargo collapse
Be careful to install vacuum pump using
motor han le (ISP-250C mass
25kgs/1-phase, 23kgs/3-phase), or using
motor eyebolt an crane with sufficient
allowable loa capacity (ISP-500C mass
44kgs/1-phase, 38kgs/3-phase) while
paying attention to stability of suspen e
loa . If not, it can cause amage, failure
or bo ily injury from falling cargo ue to
hoisting failure, or by being caught
between suspen e cargo an other
material.
Avoid moisture
Danger of electric shock
Install in an area which is not expose to
moisture such as rain or steam. If moisture
comes into an tact with the electric
source connection, it can cause fire or
bo ily injury ue to short-circuit or electric
shock.
Install at a safe
site
Danger of explosion, fire and
accident
Install in an area free from explosive,
flammable or corrosive substances.
If not, it can cause explosion, fire or
acci ent.
Ask qualified
electrician
Danger of short-circuit and
electric shock
Ask a qualifie electrician to perform
electric wiring.
If not, short-circuit or electric shock can
cause fire or bo ily injury.
Turn off electric
source
Danger of electric shock and
entanglement
Be sure to turn off electric source on
buil ing site before wiring. If not, it can
cause electric shock or bo ily injury ue to
turning objects.
Install
overcurrent
protective device
Danger of accident, fire and
failure
Be sure to install protective evice to
protect circuitry.
We recommen overcurrent protective
evice (rate 15A for ISP-250C an rate
15A for ISP-500C (rate 20A
100/115V/1phase)) to protect branch
circuit.
If equipment is not stoppe in an
emergency, it can cause acci ent, fire or
failure.
Install
emergency stop
switch
Danger of accident, fire or failure
Be sure to install an electric source
emergency stop switch (or protective
evice that can urgently stop).
If equipment is not stoppe in an
emergency, it can cause acci ent, fire or
failure.
Install short
circuit protective
device
Danger of fire and electric shock
Install short circuit protective evice.
If not, it can cause bo ily injury ue to fire
or electric shock.
Install motor
protective circuit
breaker to
protect motor
Danger of electric fire and electric
shock
Install motor protective circuit breaker to
protect motor.
If not, it can cause bo ily injury ue to
electric fire or electric shock.
If you have any questions about the
selection of protective evices, contact
either the ealer who sol it to you or us.
Be careful about
wiring
Danger of short-circuit and
electric shock
We recommen an electric source cable
of more than 2mm
2
(more than rate
10A/1phase, 7A/3phase for ISP-250C an
more than rate 18A/1phase, 15A/3phase
for ISP-500C) cross section area for
electric source cable an groun cable. Be
careful to avoi voltage rop consi ering
local situation.
If not, it can cause a short-circuit fire an
may result in bo ily injury from electric
shock.
