Andersson ANC 1.0 Manuel utilisateur
User Manual
ANC 1.0 | NOISE CANCELLING WIRELESS HEADPHONES
Table of content
Safety instructions.......................4-5
Overview.........................................6
Operation........................................7
Specifications..................................8
Other...............................................9
Innehållsförteckning
Säkerhetsinstruktioner..............10-11
Översikt.........................................12
Användning...................................13
Specifikationer...............................14
Övrigt.............................................15
Innholdsfortegnelse
Sikkerhetsinstruksjoner............16-17
Oversikt.........................................18
Bruk..............................................19
Spesifikasjoner..............................20
Annet............................................21
English4
Safety instructions
´Keep the unit away from
extremely high or low
temperatures, humidity,
water and any other
liquids.
´Do not operate the unit
if it has been exposed to
water, moisture or any
other liquids to prevent
risk against electric
shock, explosion and/
or injury to yourself and
damage to the unit.
´Do not use the unit if it
has been dropped or
damaged in any way.
´Repairs to electrical
equipment should
only be performed by
a qualified electrician.
Improper repairs may
place the user at serious
risk.
´Do not use the unit with
wet hands.
´Do not put objects into
any of the openings as
it may cause damage to
5English
Safety instructions
the product.
´Keep the unit free from
dust and lint etc.
´Do not use this unit for
anything other than its
intended use.
´Keep the unit out of
reach of children. This
product is not a toy!
´Do not drop the unit.
The internal circuit might
get damaged.
´Do not dispose of the
product in fire as it will
result in an explosion.
´Do not attempt to
disassemble the
product as it may get
damaged.
´Do not use the headset
at excessive
volume levels, as
damage to hearing may
occur.
English6
Product:
1. ANC Switch
2. 3.5 mm input
3. Increase volume / forward
4. Decrease volume / backward
5. Multifunction button
6. Status LED
7. Charging input
8. Microphone
The function buttons:
´Power on/off: To turn on headphone, press
and hold the Bluetooth button until the Status
LED blinks blue. Press and hold the Bluetooth
button again until the Status LED blinks red, the
headphone is turned off.
´ANC on/off: To start the noise cancellation, slide
the ANC button up to turn on ANC, the ANC
LED (nearby the ANC button) will light up. Slide
the NC button down to turn off ANC.
´Answer a call: Press the button when
receiving a call. Playback of music will be paused
when receiving and answering a call.
´Decline a call: Press and hold the button
when receiving a call.
´End a call: Press the button during a call.
´Redial a call: Double press the button to
redial the last called number.
´Play/pause playback: Press the button
during playback of music to pause. Press again
to resume the playback.
´Adjust playback volume: Press - / + buttons.
´Forward playback: Press and hold + button.
´Backward playback: Press and hold - button.
Overview
1
2
3
4
5
6
7
8
ANC
7English
Charging the headphone:
´Use the Micro USB cable and connect head-
phones to you computer or adaptor device
made for USB charging.
´A red LED indicator will turn on when the head-
phones are charging. The red LED light will turn
off when headphones are fully charged.
Bluetooth-pairing:
1. Turn on the headphones and place them close
to the Bluetooth activated unit you wish to pair
with.
2. Press and hold button for 6 seconds to
activate the pairing mode, the LED indicator will
quick flash in red and blue.
3. Note: If no Bluetooth unit is found - the head-
phones will enter waiting mode and eventually
turn off after 5 minutes.
4. Select ANC 1.0 from the list of discovered Blue-
tooth units and enter password 0000, if needed.
5. When pairing is successful, the LED indicator
will lit in blue.
6. For future use - the headphones will be automat-
ically paired with the previously paired Bluetooth
unit when they are turned on.
Cable connection:
´Connect a 3.5 mm audio cable to the 3.5 mm
input on the headphones and then to an audio
unit. Telephone functions are disabled when
using cable connection.
Operation
English8
Specifications
Product name ANC 1.0
Sensitivity 100+/-3 dB
Frequency response 20 Hz ~ 20 kHz
Impedance 32 Ω
Bluetooth range 10 m
Bluetooth version 5.0
Charging time 3 hours
Included in pack-
aging
- Headset
- Micro-USB charge cable
- 3.5 mm cable
- User manual
Weight 0.20 kg
9English
Copyright:
This manual is the copyright of CI no 556520-4137.
No part of this manual may be revised, copied or
transmitted in any way without written permission from
CI no 556520-4137.
Recycling:
This product’s packaging materials are
recyclable and can be reused. This product
and the accessories packed together are
the applicable product to the WEEE directive
except batteries. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance
with your local regulations concerning
chemical wastes.
Law and Safety:
The CE mark indicates that this product has
been manufactured according to current
regulations for electromagnetic fields, which
means that it is safe to use if used according
to safety instructions. The product is manufactured
according to current regulations within the EU
legislation, limiting the use of hazardous substances in
electrical and electronic equipment.
Statement:
This manual does not provide any warranty or related
declarations. All information in this manual including the
product specification, pictures and literatures is just for
reference, CI no 556520-4137 reserves the rights to
update contents of this manual without further notice.
Bluetooth:
The Bluetooth® word mark
and logos are registered
trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by
Andersson is under license. Other trademarks and trade
names are those of their respective owners.
Other
Svenska10
Säkerhetsinstruktioner
´Håll enheten borta från
extremt höga eller låga
temperaturer, fuktighet,
vatten och andra väts-
kor.
´Använd inte enheten
om den har utsatts för
vatten, fukt eller andra
vätskor eftersom detta
kan leda till elstötar, ex-
plosion och/eller skada
på dig eller enheten.
´Använd inte enheten om
du har tappat den eller
om den på något sätt
skadats.
´Reparationer av elek-
trisk utrustning ska
endast utföras av behö-
rig elektriker. Felaktiga
reparationer kan utsätta
användaren för allvarliga
säkerhetsrisker.
´Använd inte enheten om
du är våt om händerna.
´Stoppa inte in föremål
Table des matières
Langues :
