Ananda ANKDT Manuel utilisateur
ADJUSTABLE BASE
USER MANUAL
Please read and keep for future reference.
This manual contains important safety information.
SERIAL NUMBER:
MODEL: ANKDT
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 3
..............................................4
..........................5
...............................................................................6
....................................................................7
.................................................................8
.................9
.........................................................................10
...........................................11
................12
.................................13
.........14
....................................................15
...........................................16-18
........................................................19
.........................................................................................20
.......................................................21
................................................................22
......................................................23
REMOTE CONTROL SYNCHRONIZING TWO ADJUSTABLE BASES
REMOTE CONTROL FEATURES
APP & VOICE CONTROL SETUP
ALEXA VOICE COMMANDS
FAQ
TROUBLESHOOTING GUIDE
COMPONENT GUIDE
10 YEAR LIMITED WARRANTY
TABLE OF CONTENTS
TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION
WEIGHT RESTRICTIONS AND EMERGENCY BACKUP
FEATURES
GETTING STARTED
POWER CORD SETUP
JOINING TWO ADJUSTABLE BASES (CONNECTING STRAP)
LEG ASSEMBLY
MATTRESS RETAINER BAR ASSEMBLY
KD2 HEADBOARD FOOTBOARD BRACKET INSTALLATION
REMOTE ASSEMBLY AND FREQUENCY SET UP
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 4
PLEASE READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY
BEFORE USE AND ASSEMBLY
SAFETY INFORMATION
Only use the adjustable bed base for its intended use as described in this manual.
Follow the guidelines below for your safety, the safety of others and to avoid risk of
electrical shock, re, burns or injury:
• Avoid ngers in pinch-points.
•Two or more adults is strongly recommended for moving and assembling of the
adjustable bed base.
•Plug adjustable bed base into a surge protector (not included) or directly into a
suitable wall outlet.
• If the plug does not t your outlet, contact a qualied electrician to install a
suitable outlet. Unauthorized modication or failure to use a proper power
source or surge protector will void the electrical portion of your warranty.
•Keep power cords away from heated surfaces.
• To safely disconnect, ensure the base is in a at position with all motors off,
and unplug from power source.
•Always unplug the base from the electrical outlet before cleaning or servicing.
• Discontinue use of the bed base and contact a qualied service center if: it has
a damaged cord or plug, is not working properly, or has been dropped into water.
•Do not place the adjustable bed base or any of its components near or in water.
•Do not drop or insert objects into any opening. Never operate the base when
there is an obstruction between the moving parts of the adjustable base and
the metal frame.
•Replacing parts on the adjustable base is allowed to be done by consumer,
however tampering with internal components will void the warranty.
•Do not use accessories/attachments that are not recommended by the manufacturer.
•Exceeding this weight restriction could damage the bed and/or cause injury
and will void the warranty.
•Do not operate the adjustable bed base when a person or animal is underneath
the adjustable bed base.
•Mattresses may move or shift on bases – use caution.
• All 6 legs must be installed and resting evenly on the oor. The legs must be
a minimum of 6” to maintain articulating clearance and must not exceed 12”;
anything taller is considered unstable.
VIOLATING ANY OF THE SAFETY INFORMATION WILL VOID THE
WARRANTY AND MAY RESULT IN INJURY OR DAMAGE TO FLOOR
TIPPING WARNING
Placing weight at the edge may cause base to tip.
IN-HOME USE
The adjustable base is designed solely for in-home use. This base was not designed
as a hospital bed and is not designed to meet hospital standards. Do not use this
base with tent type oxygen therapy equipment or near explosive gases.
OPERATION AND SUPERVISION
Close supervision is required when the bed base is used by or near children,
animals, convalescents or disabled persons. Immediately dispose of all packing
materials as they may pose a risk to small children and pets. To avoid injury,
do not allow children or small pets to play on or under the adjustable bed base.
PACEMAKERS
As with any product that produces a vibrating motion, it is possible that some
pacemakers may interpret this motion as a false sense of movement and/or
exercise. This may or may not affect your pacemaker. If you have any concerns,
please consult your physician.
IMPORTANT SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 5
WEIGHT RESTRICTIONS
The recommended weight restriction for the adjustable base is 750 pounds,
which is calculated to include the weight of the mattress. To calculate the
weight limit, subtract the weight of the mattress from 750 pounds. The bed
will support the recommended weight limits if distributed evenly across the
base. This product is not designed to support or lift the total maximum weight
limit by the head or the foot section only. Consumers should not enter or
exit the bed with any portion of the adjustable base in the raised position;
always return the bed to a at position prior. If the weight limit is exceeded
on the head or foot mechanism, the master controller will stop all functions.
Exceeding the recommended weight limit restrictions could damage the bed
and void the warranty.
EMERGENCY BACKUP
In case of a power failure, the adjustable base features an emergency backup that
allows you to return the bed to the at position without power.
Step 1: Unplug the adjustable base.
Step 2: Locate the Emergency Battery Backup Box that is attached to the
power cord.
Step 3: Insert four 9-volt alkaline batteries (not included) into the battery box.
Step 4: Press and hold the reset button on the body of the control box to
atten the bed. (Reset button is inset. This step can only be completed
with a pen-tip or an object with a similar shape).
Step 5: Immediately remove the four 9-volt batteries after the base is returned
to the at position. The four 9-volt batteries must be removed before
power is restored to the adjustable bed base.
Warning: Leaving in the 9-volt batteries in the Emergency Battery Backup Box
after power has been restored will cause the electrical components to short out
and damage the master controller.
WEIGHT RESTRICTIONS AND EMERGENCY BACKUP
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 6
•Head and foot up/down positions; head up to 60 degrees, foot up to 35 degrees
•Pillow tilt support up to 30 degrees
• Head and foot massage with 10 minute auto shut-off
•USB charging ports
•14 button wireless remote control
• Wi for phone remote application
• Pre-programmed positions: anti-snore, zero gravity, and at position
•2 programmable positions: I and II
•Six legs with customizable heights
•Undercarriage is made with reinforced steel components for strength and durability
•Emergency backup battery box
•Mattress foot retainer bar
• Non-skid fabric
•Amazon Alexa voice control enabled with “Ananda Base WiFi” app
CONTACT OUR COMFORT CONCIERGE TO PURCHASE ACCESSORIES
•Head and footboard brackets
Note: This base is designed to t within a standard bedframe.
OPERATING NOISES
The massage function emits a noticeable tone during operation. As the massage
intensity level is increased, the tone will intensify. The noise will be less audible on
a carpeted oor and a bit more noticeable when on a hard oor surface.
During typical operation, the wheels, which allow the bed to articulate, will make
contact with the steel platform supports of the base creating a contact noise.
When entering, exiting or shifting weight on the base, this contact noise may be
audible as the wheels make contact with the steel platform supports of the base.
This is normal. Depending on the incline of the base, the noise levels can also
potentially increase.
FEATURES
FEATURES
(6x) Four-Piece
Adjustable Legs
(1x) Back-Up
Battery pack
(1x) AC/DC Power
Adapter per Base
(1x) Master Control Box
(Already installed under base)
(1x) Power Cord
Input voltage
100-240V per base
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 7
GETTING STARTED
NO TOOLS REQUIRED FOR ASSEMBLY.
Use caution at pinch points and unfolding the base
as parts may have shifted during shipping.
(1x) Wireless
Back-Lit Remote
(3x) AAA Batteries
Included per Base
(1x) Simultaneous
Synchronization Cable
(Only included with
Twin XL/CKS bases)
(1x) Foot Retainer bar
(2x) Wing-nuts per Base
(1x) Split Adj Base Sets
Connecting Strap
(Only included with
Twin XL/CKS bases)
GETTING STARTED
(1x) Backup
Battery pack
(1x) AC/DC Power
Adapter per Base
(1x) Power Cord
Input voltage
100-240V per base
(1x) Master Control Box
(Already installed under base)
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 8
POWER CORD SETUP
CAREFULLY open the adjustable bed base into an
L position on its side or lay at with the bottom
facing up. This step may require two adults for safety.
Ensure all power cord connections circled to the
right are completely plugged-in.
Installation of the Backup Battery Pack is optional.
Only put batteries into the Backup Battery Pack
during an electrical outage and after the power cord
is unplugged from a power source.
POWER CORD SETUP
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 9
JOINING TWO ADJUSTABLE BASES
If any split setup is being installed, plastic
connecting straps are provided (one per base) to
secure the bases together. Use both straps to secure
the head and foot portions together.
With the bases in their desired location, slightly
loosen both legs to allow the strap to t on the leg
bolt, between the leg washer and frame.
(A)
(B)
JOINING TWO ADJUSTABLE BASES
Slide side (A) of the connecting strap onto leg bolt.
Swing the strap and connect side (B) to the leg bolt.
Secure the strap by shifting to the left.
Re-tighten legs. Do not over tighten. Use the
remaining strap and repeat on other end of the base.
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAY
PAGE 10
The legs must be a minimum of 6” to maintain
articulating clearance and must not exceed 12”;
anything taller is considered unstable.
VIOLATING ANY OF THE SAFETY GUIDELINES MAY RESULT IN
DAMAGE OR INJURY, VOID THE WARRANTY FOR IMPROPER USE
AND MAY CAUSE DAMAGE TO THE FLOOR.
LEG ASSEMBLY
Locate the legs and choose one of the heights.
Make sure the leg with the solid end is touching the
oor. Screw six legs into the pre-drilled holes by
hand. All legs must be installed and resting evenly
on the oor. The base will not operate properly
without the legs.
NEED ASSISTANCE? CALL US AT 1-855-726-2632 FROM 8:00AM TO 5:00PM PDT MONDAY-FRIDAYLEG ASSEMBLY
Table des matières
Autres manuels Ananda Accessoires pour vélos
