Analog way ORCHESTRA Manuel utilisateur

Orchestra²

Ref. ORC50

USER MANUAL

THANK YOU

By following these simple steps you will be able to obtain the most from your powerful Orchestra² and its

many features.

1. INTRODUCTION

2. HARDWARE INSTALLATION

3. OPERATING THE ORCHESTRA²

4. STARTING WITH THE ORCHESTRA²

2.1 Safety instrucons

3.1 The Orchestra² front panel

4.1 Operaonal conguraon

4.2 Show sengs

1.1 What is the Ochestra²

1.2 Useful terms and denions

1.3 Ochestra² color codes

2.2 Unpacking and inspecon

2.3 The Orchestra² rear panel

2.4 Hardware specicaons

4.1.1 English

4.1.2 French

4.1.3 Italian

4.1.4 German

4.1.5 Spanish

3.1.1 Overview

3.1.2 Sengs secon

3.1.3 Layout secon

3.1.4 Preset memory secon

3.1.5 Screen secon

3.1.6 Source Preview secon

3.1.7 Preset Edion secon

3.1.8 User Eect secon

3.1.9 Transion secon

4.1.1 User conguraon

4.1.2 System conguraon

4.1.3 Show conguraon

4.2.1 Screen setup

4.2.2 Edit devices

4.2.3 Output conguraon

4.2.4 Video Out conguraon

4.2.5 Input conguraon

4.2.6 Audio conguraon

4.2.7 Source conguraon

4.2.8 So Edge setup

4.2.9 Image Sengs

4.2.10 Logos & Frames

4.2.11 Controls Menu

5. OPERATING THE ORCHESTRA²

5.1 Using the joysck

5.2 Layer sengs

5.3 Live backgrounds

5.4 Frame backgrounds

5.6 Working with logos

5.7 Preset memories

5.8 Transions

5.5 Working with PIPs

5.2.1 Layer sengs

5.2.2 Snap Funcon

5.2.3 Element Sengs

5.2.4 Source Sengs

5.3.1 Adding a background

5.3.2 Clearing a background

5.4.1 Adding a Frame

5.4.2 Clearing a Frame

5.6.1 Adding a logo

5.6.2 Selecng a logo

5.6.3 Manipulang a logo

5.6.4 Logo depth

5.6.5 Clearing a logo

5.7.1 Saving a preset memory

5.7.2 Loading a preset memory

5.7.3 Reload memory from Main

5.7.4 Accessing Memory pages

5.7.5 Improved Mulscreen Control

5.8.1 User eects

5.8.2 Take

5.8.3 T-Bar

5.8.4 Step back

5.8.5 Take Cut

5.8.6 Init-T-bar

5.8.7 Quick Frame

5.5.1 Adding a PIP

5.5.2 Selecng a PIP

5.5.3 Manipulang a PIP

5.5.4 PIP depth

5.5.5 Clearing a PIP

6. WORKING WITH A MATRIX

7. EXAMPLES

8. SOFT EDGE BLENDING

9. WARRANTY

10. CONTACT

6.1 Matrix setup

7.1 About examples

8.1 So Edge blending

9.1 Analog Way limited warranty

6.2 Matrix conguraon

7.2 Examples

8.2 So Edge setup

9.2 Repair and return instrucons

1.1 What is the Orchestra²

1. INTRODUCTION

Orchestra² is a powerful intuive and ergonomic remote controller designed to manage several switchers

such as Eikos, Eikos LE, OPS300, OPS200, Pulse, Pulse LE, SmartVu, SmartVu LE, Smart MatriX, Smart

MatriX LE, Smart Edge, Smart Edge FX, Smart Quad, Di-VenX II or Eikos², Saphyr, SmartMatrix², Pulse²,

QuickMatrix and QuickVu systems, independently or simultaneously in any kind of combinaon, including

So Edge Blending.

Orchestra² can control up to 6 independent screen conguraons in dierent locaons (single display or

mulple projectors in So Edge Blending mode) and store up to 64 presets per screen conguraon.

Orchestra² controls the eects and funconalies of the Di-VenX II, Eikos, Eikos LE, OPS300, OPS200, Pulse,

Pulse LE, SmartVu, SmartVu LE, Smart MatriX, Smart MatriX LE, Smart Edge, Smart Edge FX, Smart Quad

and Eikos², Saphyr, SmartMatrix², Pulse², QuickMatrix and QuickVu systems.

NOTE: Orchestra² oers the control of matrices in order to mulply the number of live sources, whatever the

Analog Way switcher number of inputs is.

Designed with a 16/9 TFT color touch screen for easy preview of all conguraons, Orchestra² is especially

dedicated to facilitate seng up and programming of mul-screen events and presentaons. It perfectly ts

your every day or presgious shows where speed and easiness of conguraon are required.

The numerous user friendly, customizable and congurable presets enable the set up of your screen

conguraon, so that they are easily accessible during your presentaon. Any last minute modicaon is easy

thanks to the direct input/output selecon access. Also equipped with a USB port, the complete conguraon

of your events can be saved for future use.

With its new Interface Human Machine, Orchestra² will help you manage mul-screen and mul-locaon live

presentaons with total peace of mind.

SCREENS: a “Screen” on the Orchestra² is a containing element, which corresponds to a projecon surface.

A Screen generally contains a device, such as an Eikos, Eikos LE, OPS300, OPS200, Pulse, Pulse LE, SmartVu,

SmartVu LE, Smart MatriX, Smart MatriX LE, Smart Edge, Smart Edge FX, Smart Quad, Di-VenX II, Eikos²,

Saphyr, SmartMatrix², Pulse², QuickMatrix or a QuickVu, though a screen could well be composed of several

devices, in So Edge conguraon for example.

PRESET: a “Preset” on the Orchestra², is a capture (or a recall) of the state of a Screen. In other words, presets

allow to record or recall the state of sources and elements in a Screen at any given moment.

LAYERS: a “Layer” is an image display element (such as a Background, a PIP, or a Logo) that has an associated

visual priority — either in front of another layer or behind.

BACKGROUND FRAME: a “Background Frame” is a full screen image which is selected from one of the memory

slots available. A Frame can be ash captured from any video or computer source plugged into the machine.

BACKGROUND LIVE: a “Background Live” is a live (animated video or moon content) full screen image which

is selected from one of the available sources of the slave device.

PIP: a “PIP” refers to Picture-in-Picture. It is a source (typically of reduced size) that is posioned over another

background image or another PIP. PIPs can be reduced, enlarged, bordered and shadowed. They can overlap

one another, depending on their visual priority.

1.1 What is the Ochestra²

1.2 Useful terms and denions

1.3 Orchestra² color codes

The Orchestra² buons were designed with a handy color code to guide users, avoid mistakes, and give a

constant status of the device. Thus, all Orchestra² buons have two or three dierent states (and colors),

depending on their funcon and their current state.

All available (selectable) buons, funcons and eects light up green, other than the Source Main buons

which light up in red.

Any selected buon on the Orchestra² turns a bright yellow.

The TAKE buon is displayed in red, and will blink red when acve.

The Orchestra² is comprised of several double-take buons (CLEAR, CLEAR PIPs, CLEAR LOGOs, CLEAR ALL

buons...) which should be pressed once to acvate and a second me to conrm. These will blink yellow

while waing for conrmaon.

Finally, some of the Orchestra² buons (SOURCE PREVIEW for example) will turn pale yellow when they have

been selected, are acve, but are not currently being worked with.

1.3 Ochestra² color codes

LOGO: a “Logo” is a part of an image that can be ash captured from any video or computer source, by keying

or image cut-out. Logos can be posioned anywhere on your screen.

KEYING & TITLING: “Key” is an electronic process whereby a video image is electronically superimposed over

another source or background, by dynamically removing a poron of the rst image. For example, removing

all content of a certain color (such as green or blue) is called a cung out either a color (Chroma Key,) and

removing content based onor its brightness or luminance levels is called a (Luma Key). Keys are typically used

for tles, Logos and special eects.

2.1 Safety instrucons

2. HARDWARE INSTALLATION

All of the safety and operang instrucons should be read before the product is operated and should

be maintained for further reference. Please follow all of the warnings on this product and its operang

instrucons.

• WARNING: To prevent the risk of electric shock and re, do not expose this device to rain, humidity or

intense heat sources (such as heaters and direct sunlight). Slots and openings in the device are provided for

venlaon and to avoid overheang. Make sure the device is never placed near a texle surface that could

block the openings. Also keep away from excessive dust, vibraons and shocks.

• POWER: Only use the power supply indicated on the device of the power source. Devices equipped with

a grounding plug should only be used with a grounding type outlet. In no way should this grounding be

modied, avoided or suppressed. Connecon of equipment to main supply must be aer branch circuit

breaker of the building installaon.

• POWER CORD: The device is equipped with a main switch (On (I) /O (O)). The Switch ON and OFF is

iniated by the main switch.

Cauon: The power cord constutes the only mean to completely disconnect the equipment from the main

power.

Apply the following guidelines:

- The equipment connected to the network must have a release system easily accessible and located

outside the unit.

- Unplug the power cord; do not pull on the power cord but always on the plug itself.

- The outlet should always be near the device and easily accessible.

- Power supply cords should be routed so that they are not likely to be walked on or pinched by items

placed upon or against them.

If the power supply cord is damaged, unplug the device. Using the device with a damaged power supply cord

may expose your device to electric shocks or other hazards. Verify the condion of the power supply cords

once in a while. Contact your dealer or service center for replacement if damaged.

• CONNECTIONS: All inputs and outputs (except for the power input) are TBTS dened under EN60950.

• SERVICING: Do not aempt to service this product yourself by opening or removing covers and screws

since it may expose your device to electric shocks or other hazards. Refer all problems to qualied service

personnel.

• OPENINGS: Never push objects of any kind into this product through the openings. If liquids have been

spilled or objects have fallen into the device, unplug it immediately and have it checked by a qualied

technician.

2.1 Safety instrucons

2.1.1 English

2.1 Safety instrucons

An de mieux comprendre le fonconnement de cet appareil nous vous conseillons de bien lire toutes les

consignes de sécurité et de fonconnement avant ulisaon. Conservez les instrucons de sécurité et de

fonconnement an de pouvoir les consulter ultérieurement. Respectez toutes les consignes marquées dans la

documentaon, sur le produit et sur ce document.

• ATTENTION : An de prévenir tout risque de choc électrique et d’incendie, ne pas exposer cet appareil à la

pluie, à l’humidité ou à des sources de chaleur intense.

• INSTALLATION : Veillez à assurer une circulaon d’air susante pour éviter toute surchaue à l’intérieur de

l’appareil. Ne placez pas l’appareil sur ou à proximité d’une surface texle suscepble d’obstruer les orices de

venlaon. N’installez pas l’appareil à proximité de sources de chaleur comme un radiateur ou une poche d’air

chaud, ni dans un endroit exposé au rayonnement solaire direct, à des poussières excessives, à des vibraons

ou à des chocs mécaniques. Ceci pourrait provoquer un mauvais fonconnement et un accident.

• ALIMENTATION : Ne faire fonconner l’appareil qu’avec la source d’alimentaon indiquée sur l’appareil.

Les appareils doivent être obligatoirement connectés sur une source équipée d’une mise à la terre ecace.

En aucun cas cee liaison de terre ne devra être modiée, contournée ou supprimée. Raccordement des

équipements à l’alimentaon principale doit être postérieur au disjoncteur de branchement de l’installaon

électrique du bâment.

• CORDON D’ALIMENTATION : Les appareils sont équipés d’un interrupteur général (Marche I / Arrêt O), la

mise en tension et la mise hors tension se fait en aconnant cet interrupteur général.

Aenon : le cordon d’alimentaon constue le seul moyen de débrancher l’appareil totalement de

l’alimentaon secteur. Pour être certain que l’appareil n’est plus alimenté, ce cordon doit être

débranché de la prise murale.

Appliquer les consignes suivantes :

- Le matériel relié à demeure au réseau, doit avoir un disposif de seconnement facilement accessible

qui doit être incorporé à l’extérieur de l’appareil.

- Débrancher le cordon d’alimentaon de la prise murale si vous prévoyez de ne pas uliser l’appareil

pendant quelques jours ou plus.

- Pour débrancher le cordon, rez-le par la che. Ne rez jamais sur le cordon proprement dit.

- La prise d’alimentaon doit se trouver à proximité de l’appareil et être aisément accessible.

- Ne laissez pas tomber le cordon d’alimentaon et ne posez pas d’objets lourds dessus.

Si le cordon d’alimentaon est endommagé, débranchez-le immédiatement de la prise murale. Il est

dangereux de faire fonconner un appareil avec un cordon endommagé ; un câble abîmé peut provoquer un

risque d’incendie ou un choc électrique. Vériez le câble d’alimentaon de temps en temps. Contactez votre

revendeur ou le service après-vente pour un remplacement.

• CONNEXIONS : Toutes les entrées et sores (exceptée l’entrée secteur) sont de type TBTS (Très Basse

Tension de Sécurité) dénies selon EN 60950.

• RÉPARATION ET MAINTENANCE : L’ulisateur ne doit en aucun cas essayer de procéder aux opéraons de

dépannage, car l’ouverture des appareils par retrait des capots ou de toutes autres pièces constuant les

boîers ainsi que le dévissage des vis apparentes à l’extérieur, risquent d’exposer l’ulisateur à des chocs

électriques ou autres dangers. Contactez le service après-vente, votre revendeur ou adressez-vous à un

personnel qualié uniquement.

• OUVERTURES ET ORIFICES : Les appareils peuvent comporter des ouvertures (aéraon, fentes, etc...),

veuillez ne jamais y introduire d’objets et ne jamais obstruer ses ouvertures. Si un liquide ou un objet

pénètre à l’intérieur de l’appareil, débranchez immédiatement l’appareil et faites-le contrôler par un

personnel qualié avant de le remere en service.

2.1.2 French

2.1 Safety instrucons

Allo scopo di capire meglio il funzionamento di questa apparecchiatura vi consigliamo di leggere bene

tu i consigli di sicurezza e di funzionamento prima dell’ulizzo. Conservare le istruzioni di sicurezza e di

funzionamento al ne di poterle consultare ulteriormente. Seguire tu i consigli indica su questo manuale

e sull’apparecchiatura.

• ATTENZIONE: Al ne di prevenire qualsiasi rischio di shock elerico e d’incendio, non esporre l’apparecchiatura

a pioggia, umidità e a sorgen di eccessivo calore.

• INSTALLAZIONE: Assicuratevi che vi sia una suciente circolazione d’aria per evitare qualsiasi

surriscaldamento all’interno dell’apparecchiatura. Non collocare l’apparecchiatura in prossimità o su

superci tessili suscebili di ostruire il funzionamento della venlazione. Non installate l’apparecchiatura

in prossimità di sorgen di calore come un radiatore o una fuoruscita d’aria calda, né in un posto esposto

direamente ai raggi del sole, a polvere eccessiva, a vibrazioni o a shock meccanici. Ció potrebbe provocare

un erroneo funzionamento e un incidente.

• ALIMENTAZIONE: Far funzionare l’apparecchiatura solo con la sorgente d’alimentazione indicata

sull’apparecchiatura. Le apparecchiature queste devono essere obbligatoriamente collegate su una sorgente

fornita di una eciente messa a terra. In nessun caso questo collegamento potrà essere modicato, sostuito

o eliminato. Connessione delle apparecchiature alla rete elerica deve essere successiva interruore di

circuito dell’impianto dell’edicio

• CAVO DI ALIMENTAZIONE: Gli apparecchi con un interrutore (commutatore) generale (Accesso I : Speuto

0), accendere ou spagnere l’apparecchio si fa usando l’interrutore.

Aenzione: il cavo di alimentazione è il solo modo di disconneere l’apparecchio dell’alimentazione. Per

assicurarsi che totalemente l’apparecchio non è più collegato, il cavo deve essere disconesso della presa

murale.

Seguire le instruzioni seguen:

- Il materiale collegato a residenza alla rete, deve avere un disposivo di sezionamento facile da

raggiongere eche deve essere inserito all’esterno del apparecchio.

- Disconneere l’apparecchiatura dalla presa murale se si prevede di non ulizzarla per qualche giorno.

- Per disconneere il cavo rare facendo forza sul conneore.

- La presa d’alimentazione deve trovarsi in prossimità dell’apparecchiatura ed essere facilmente

accessibile.

- Non far cadere il cavo di alimentazione né appoggiarci sopra degli ogge pesan. Se il cavo di

alimentazione é danneggiato, spegnere immediatamente l’apparecchiatura.

E’ pericoloso far funzionare questa apparecchiatura con un cavo di alimentazione danneggiato, un cavo

graato puó provocare un rischio di incendio o uno shock elerico. Vericare il cavo di alimentazione spesso.

Contaare il vostro rivenditore o il servizio assistenza per una sostuzione.

• CONNESSIONE: Tu gli ingressi e le uscite (ecceo l’alimentazione) sono di po TBTS denite secondo EN

60950.

• RIPARAZIONI E ASSISTENZA: L’ulizzatore non deve in nessun caso cercare di riparare l’apparecchiatura,

poiché con l’apertura del coperchio metallico o di qualsiasi altro pezzo costuente la scatola metallica,

nonché svitare le vi che appaiono esteriormente, poiché ció puó provocare all’ulizzatore un rischio di

shock elerico o altri rischi.

• APERTURE DI VENTILAZIONE: Le apparecchiature possono comportare delle aperture di venlazione, si

prega di non introdurre mai ogge o ostruire le sue fessure. Se un liquido o un oggeo penetra all’interno

dell’apparecchiatura, disconneerla e farla controllare da personale qualicato prima di rimeerla in

servizio.

2.1.3 Italian

Autres manuels pour ORCHESTRA

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Analog way Équipement d'éclairage

Analog way

Analog way ORCHESTRA Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur