AMOD ABG10868 Manuel utilisateur
Mini-Bluetooth GPS Receiver
User Manual
Mini-Bluetooth GPS Receiver
©2005 AMOD
All rights reserved. No parts of this work may be reproduced in any form or by any means –
graphic, electronic, or mechanical, including photocopying, recording, taping, or information
storage and retrieval systems – without the written permission of the publisher.
Products that are referred to in this document may be either trademarks and/ or registered
trademarks of the respective owners. The publisher and the author make no claim to these
trademarks.
While every precaution has been taken in the preparation of this document, the publisher and
the author assume no responsibility for errors or omissions, or for damages resulting from the
use of information contained in this document or from the use of programs and source code
that may accompany it. In no event shall the publisher and the author be liable for any loss of
profit or any other commercial damage caused or alleged to have been caused directly or
indirectly by this document.
Printed: June 2005 in (Taipei, Taiwan R.O.C)
FCC Notices
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OT TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS CAOULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Table of Contents
1. Introduction
- Introduction
- Packing List
2. Features
-Key features
3. Technical Specification
3.1 Basic Specifications
3.2 TTFF
3.3 Positioning accuracy
3.4 Sensitivity
3.5 Measurement data update time
3.6 Power
3.7 Limitations
3.8 Output & Interface
3.9 Physical Specification
3.10 Others
4. Operation of ABG10868
4.1 Device Description
4.2 Mechanical Drawing
4.3 LED Status
4.4 Usage
4.4.1 Turn On AGB10868
4.4.2 Connection
4.4.2-1 Connect to PDA
4.4.2-2 Verify the connection
4.4.2-3 Connect to Laptop with Bluetooth device
4.4.3 Power Jack
4.4.4 GPS Reset Button
4.4.5 Smart Power Saving Feature
1. Introduction
The ABG10868 is a compact-size, high performance Bluetooth GPS receiver with elegant
mechanical design. The core of this elegant device is the SONY CXD 2951 GPS receiver IC
and the ST Micro 2415/2150 Bluetooth chipset.
The ABG10868 sports a high sensitivity of –152 dBm during tracking and –139 dBm during
acquisition. The average TTFF (time to first fix) is 2 ~ 3 sec. in hot start mode, 30 sec. in
warm start mode and 40 sec. in cold start mode. It also is capable of support WAAS/EGNOS.
This excellent performance really makes theABG10868 stand out.
The ABG10868 is a class 2 Bluetooth device, with range of 10 meters. It supports v1.1
Bluetooth Serial Port Profile, which ensures compatibility with all devices such as PDAs and
smart phones which also support the SPP Bluetooth Profile.
There are three LED indicators on the ABG10868 – a green (GPS) LED, a blue (Bluetooth)
LED, and a red (power status) LED. The green LED will be lit when the GPS receiver is in
acquisition mode, and will start blinking every 2 seconds when the GPS position is fixed (i.e.,
tracking mode). The blue LED will be blinking every 2 seconds when the Bluetooth is in
connection and be blinking every 8 seconds if the Bluetooth connection between the host and
ABG10868 is lost. The red LED will be blinking to indicate the battery power level is low,
on when charging the battery and off if the battery is fully charged.
The ABG10868 comes with a 1200 mAh rechargeable battery to ensure over 12 hours of
operating time between charges. It also incorporates an intelligent power management
scheme so that the GPS is turned off if before the Bluetooth connection is established, or when
the Bluetooth connection is lost. Together with the large capacity 1200 mAh rechargeable
battery, the operating time of the ABG10868 is much longer than most of the Bluetooth GPS
receivers currently on the market.
Packing List
The package includes the following items.
zABG10868 Bluetooth GPS receiver
zCar charger
zA/C Power Adapter (Optional)
Mini Bluetooth GPS
Receiver
A/C Power Adapter (Optional)
DC Car Charge
2. Features
The ABG10868, based on AMOD AGP1030 Bluetooth GPS receiver module with built-in
rechargeable, removable lithium-ion battery has many smart and useful features. Without any
wiring requirement, ABG10868 adds GPS positioning capability to any Bluetooth (SPP profile)
enabled device.
Key features:
zBuilt-in Sony CXD2951 low power consumption chip
z12 parallel satellite tracking channels, for fast acquisition and reacquisition
zBuilt-in WASS/EGNOS support (need optional software)
zIntegrated patch antenna
zRechargeable and removable lithium-ion battery lasts for 12 hours of continual use
zSupport NMEA0183 V.3.01
zFully compatible with Bluetooth Serial Port Profile (SPP)
zBluetooth 1.1 certified with a Class 2 Bluetooth radio
zLow power consumption
zSmart power saving feature
z3-color LED status indicator
zSmall, lightweight and elegant design
zOn/ Off switch
zSuitable for car navigation, marine navigation, fleet management, AVL, personal
navigation, tracking and mapping
3. Technical Specification
3.1 Basic Specification:
zGPS chipset: Sony CXD2951GA-4 Single chip
zChannel: 12-channel GPS receiver capable of simultaneously receiving 12 satellites
zReception frequency: 1575.42MHz (L1 band, CA code)
zDimension: 73.4 x 39.0 x 18.9 mm (L x W x H)
z3-color LED status indicators:
-GPS status: The green LED will be lit when the GPS receiver is in acquisition mode,
and will start blinking every 2 seconds when the GPS position is fixed (i.e., during
tracking mode)
-Bluetooth status: The blue LED will be lit once per two seconds when the Bluetooth
is in connection and be lit 0.1 second every 8 seconds if the Bluetooth connection
between the host and ABG10868 is lost or in standby mode
-Battery status: The red LED will be blinking to indicate the battery power level is low,
on when charging the battery and off if the battery is fully charged.
zSwitch and connectors:
-Power switch: Turn on/ off the ABG10868
-Reset button: To initialize the GPS receiver
-Power jack: Connect to external power or car charger
3.2 TTFF (Time to First Fix)
Time until initial position measurement after power-on with the following conditions:
zCold Start (without both ephemeris and almanac time): 45s (average) / 60s (95%
possibility)
zWarm Start (without ephemeris but with almanac time): 30s (average) / 35s (95%
possibility)
zHot Start (with both ephemeris and almanac time): 2s (average) / 3s (95% possibility)
* Reference data with elevation angle of 5° or more and no interception environment with
satellite powers ≧ -130dBm
* “95% possibility” means “position time with 95% possibility”
3.3 Positioning accuracy:
2DRMS: approx. 2m
* Reference data with elevation angle of 5° or more and no interception environment with
satellite powers ≧ -130dBm
3.4 Sensitivity:
zTracking sensitivity: -152dBm (average) or less
zAcquisition sensitivity: -139dBm (average) or less in Normal mode
3.5 Measurement data update time:
zMeasurement data update time: 1s
3.6 Power:
zPower source: Removable rechargeable lithium ion battery with 5V DC input charging
circuit
zOperation time: 12 hours typical after full charge, continuous mode at 25℃
3.7 Limitations:
zAltitude: < 18,000m
zVelocity: < 500m/s
zAcceleration: < 4g
3.8 Output & Interface
Output:
zGPS transfer rate:
Baud rate: 9600 bps
Data bit: 8
Parity: No
Stop bit: 1
zGPS output format: NMEA0183 V3.01
GPGGA (1 time per second)
GPGSA (1 time per second)
GPGSV (1 time per 5 second)
GPRMC (1 time per second)
GPVTG (1 time per second)
zDatum: WGS84
Interface:
zCompatible Bluetooth Serial Port Profile (SPP): V1.1 and class 2 (Bluetooth range
10m)
3.9 Physical Specification:
zOperating Temperature: -20℃～+60℃
zStorage temperature: -20℃～+85℃
zOperating humidity: 5% to 95%; No condensing
3.10 Others:
zSmart power saving feature (SPS): If the Bluetooth connection between the host and
ABG10868 is lost, ABG10868 will turn off GPS automatically to save the energy.
zBluetooth:
-Bluetooth chipset:
RF: ST STLC2150
Baseband: ST STLC2415
-Bluetooth frequency: 2.4 – 2.48GHz
-Bluetooth specification: V1.1 specification compliant
-Bluetooth Profile: Serial Port Profile (SPP)
-Bluetooth Power Class: Class 2 (maximum 10 meter range)
4. Operations of ABG10868
4.1 Device Description:
4.2 Mechanical Drawing:
Bluetooth LED
Battery LED
GPS LED
Power adapter
connector
Table des matières
Autres manuels AMOD GPS
