AMG AMG5802R Manuel utilisateur

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 1 of 8 AMG5802R Instruction Sheet D22051-

00.doc

AMG5802R

Instruction Manual

100BASE-TX Ethernet Media Converter Receive Unit for a

Multimode Fibre Link

The AMG5802R is a rackmount Ethernet Media Converter receive unit designed to provide 100BASE-

TX full duplex Ethernet connectivity over one singlemode fibre.

The AMG5802R is designed to plug into an AMG2009 or AMG2015 subrack, which in turn fits into a

19" rack system.

The AMG5802R is designed to operate with an AMG5801 standalone or AMG5801R rackmount

Ethernet data transmit unit in a point to point configuration.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 2 of 8 AMG5802R Instruction Sheet D22051-

00.doc

Contents

Introduction 3

Unit Functional Schematic.................................................................................................................. 3

Optical Connection ............................................................................................................................. 3

Connections 4

Optical Connection Multimode............................................................................................................ 4

Power Connection .............................................................................................................................. 4

Ethernet Connection........................................................................................................................... 4

Front Panel Indicators 5

Power LED.......................................................................................................................................... 5

Ethernet Data LEDs............................................................................................................................ 5

Ethernet Operation 6

Physical Information 7

Dimensions ......................................................................................................................................... 7

Mounting Details................................................................................................................................. 7

Safety 7

Maintenance and Repair 7

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 3 of 8 AMG5802R Instruction Sheet D22051-

00.doc

Introduction

Unit Functional Schematic

The AMG5802R transmits Ethernet data to

the AMG5801R transmit unit.

It also receives Ethernet data transmitted

from the AMG5801R.

Optical Connection

The AMG5802R connections are illustrated in the following example which shows an AMG5801R data

transmit unit together with an AMG5802R rackmount data receive unit configured as a point to point

system.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 4 of 8 AMG5802R Instruction Sheet D22051-

00.doc

Connections

Optical Connection Multimode

Optical Fibre ........................................Multimode 50/125 or 62.5/125**

Connector ............................................SC/PC

Minimum Optical Launch Power..........-10dBm

Transmit Wavelength...........................1550nm

Minimum Optical Sensitivity.................-30dBm

Receive Wavelength............................1310nm

Minimum Optical Dynamic Range .......20dB.

**Note: the transmission distance is limited by the bandwidth of the Multimode optical fibre. The optical

data rate is 155Mbits/s, which may restrict operation to a maximum fibre length of 7km, although in

most cases the units will operate successfully over longer fibre lengths. It is advisable however for

distances greater than 7km, to have the optical fibre tested.

Power Connection

Power supply .......................................From plug in connection on the AMG2009 or AMG2015 subrack

Power consumption .............................5 Watts max.

Ethernet Connection

Ethernet Data Connector ....................RJ45

Interface ...............................................Auto MDI/MDIX 100BASE-TX

Ethernet Data Rate ..............................Maximum 100Mb/s full duplex

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 5 of 8 AMG5802R Instruction Sheet D22051-

00.doc

Front Panel Indicators

Power LED

POWER ............................................... Green - Power is present

Off - Power is not present

VIDEO ............................................... Off - Not used

OPTO TX............................................. Green - Tx opto. present

Off - Tx opto. is not present

OPTO RX ............................................ Green - Rx opto. sync.

Off - Rx opto. is not sync.

Ethernet Data LEDs

Link not Present .................................. Yellow - Link not present

Off - Link is present

Link Integrity ........................................ Green - Link integrity is good, Idle state

GBlink - Data transfer

Off - Link not present

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 6 of 8 AMG5802R Instruction Sheet D22051-

00.doc

Ethernet Operation

The Ethernet interface supports "Auto-Negotiation" and will operate at either 10Mbits/s half duplex or

100Mbit/s full duplex. Data is transmitted from one port the other port with minimum delay or buffering.

The port also implements "Auto MDI/MDIX" i.e. it may be connected with aeither a straight-though or

cross-over cable to an appropriate device such as external switch, PC or other DCE/DTE.

Two LED indicators are provided adjacent to the RJ-45 port: Green indicates Link / Data transfer and

Yellow when in half-duplex mode.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 7 of 8 AMG5802R Instruction Sheet D22051-

00.doc

Physical Information

Dimensions

Height .................................................. 3U Plug-in

Width ................................................... 7HP

Depth ................................................... 170mm excluding connectors

Weight ................................................. 1000grams

Mounting Details

The unit is designed to be mounted within an AMG2009 or AMG2015 Subrack on standard card

guides.

Safety

AMG Optical Fibre Products use Class 1 laser systems in accordance with EN 60825-2:2000.

It is always advisable to follow good practice when working with optical fibre systems. This includes:

Do not stare with unprotected eyes or with any unapproved collimating device at fibre

ends or connector faces, or point them at other people.

Use only approved filtered or attenuating viewing aids

For other safety issues and advice on good practice associated with optical fibre systems, please see

EN 60825-2:2000 or your local safety officer.

Maintenance and Repair

There are no user serviceable parts within AMG products. See unit data sheet for full specification.

In case of problem or failure, please call your local support centre or contact: AMG Systems Ltd. at

3 The Omega Centre, Stratton Business Park, Biggleswade, Beds., SG18 8QB, UK.

Phone +44 (0) 1767 600 777

Technical Support +44 (0) 1767 604 491

Email techsupport@amgsystems.com

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 8 of 8 AMG5802R Instruction Sheet D22051-

00.doc

This page is intentionally blank.

Table des matières

Autres manuels AMG Récepteur

AMG

AMG AMG5516 Manuel utilisateur

AMG

AMG AMG3723 Manuel utilisateur

AMG

AMG AMG4744-SF Manuel utilisateur

AMG

AMG AMG4714Bx-SF Manuel utilisateur

AMG

AMG AMG4684BxR Manuel utilisateur

AMG

AMG AMG4644BxE Manuel utilisateur

AMG

AMG AMG2784R-DR-CWDMn Manuel utilisateur

AMG

AMG AMG5526 Manuel utilisateur

AMG

AMG AMG5914-2A9 Manuel utilisateur

AMG

AMG AMG5612 Manuel utilisateur

AMG

AMG AMG4782ER Manuel utilisateur

AMG

AMG AMG4684R Manuel utilisateur

AMG

AMG AMG5712 Manuel utilisateur

AMG

AMG 4688A Manuel utilisateur

AMG

AMG AMG3788ERN-DR-1550-HP Manuel utilisateur

AMG

AMG AMG3782RN-DR-SF Manuel utilisateur

AMG

AMG AMG3788BERN-DR Manuel utilisateur

AMG

AMG AMG5716A8R-DR Manuel utilisateur

AMG

AMG AMG4784EN-DR-SF Manuel utilisateur

AMG

AMG AMG6184-DR-SF Manuel utilisateur

AMG

AMG AMG4788R-SF Manuel utilisateur

AMG

AMG AMG4744ER-SF Manuel utilisateur

AMG

AMG AMG4784E-SF Manuel utilisateur

AMG

AMG AMG5804A966G-DF Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur