AMFD RideMaxx Manuel utilisateur
RideMaxx Quick Start Guide 3
Congratulations and thank you for your
decision to purchase RideMaxx,the World’s
most advanced and only wireless,electronic
fuel injection controller (EFI) designed
specifically for your motorcycle.
is Quick Start Guide will easily direct
you through the few installation steps
required to get you on your way to enjoy-
ing the riding improvements and benefits
of your new RideMaxx fuel injection
controller.
Before installation, please register your
RideMaxx with us either online at our
website (americanmicrofuel.com), or by
mailing in the provided postage-paid
registration card. Your registration will
be necessary for you to enjoy the included
and more advanced levels of performance
tuning. Your specific RideMaxx registra-
tion number, its serial number, can be
found either on your warranty registration
card, or located on the bottom side of the
FuelMaxx (Yellow ECU module). Please
retain this number for your records.
4
RideMaxx Quick Start Guide 5
Your Parts:
1 FuelMaxx ECU Module
1 RideMaxx Locking Nameplate
2 FuelMaxx Bolts
1 RideTuner Handlebar Unit
2 RideTuner Handlebar Bolts
1 CR2 lithium Ion Battery
2 Handlebar space reducer gaskets
(for 1″Handlebars)
1 RideMaxx Hex Driver
(double ended)
1 RideMaxx Software CD
1 RideMaxx Decal
1 AMFD Decal
1 RideMaxx Bluetooth Passkey: 0000
In The Box
To validate your warranty, registration
must be completed within 30 days of your
purchase.
We ask that you please take the time
to accurately fill in the questions in the
registration process—they only take a
few minutes of your time, and will help
AMFD provide you with the excellence
of customer service, advanced tuning and
the support that you should expect.
Enjoy your RideMaxx EFI controller, we
sure enjoy ours—and thank you so-much
for your business.
—e AMFD Team
6
RideMaxx Quick Start Guide 7
Installation
Contents
Using RideMaxx 23
Exit Notes
FuelMaxx Installation For Softails 10
FuelMaxx Installation For Baggers 12
RideTuner Installation 18
Finishing Installation 22
Installing New Maps 24
RideTuner Battery 28
FCC 29
Warranty 30
FuelMaxx and RideTuner Overview 8
8
RideMaxx Quick Start Guide 9
FuelMaxx and RideTuner Overview
RideMaxx: The FuelMaxx
The brain of the RideMaxx performance EFI control system
RideMaxx: The RideTuner
Your wireless control of the FuelMaxx module
e industry leading wireless Ride-
Tuner mounts directly onto your
handlebar. It is your direct means to
select from three separate options
(MaxxFuel Economy, MaxxPower,
and RideMaxx Auto) built into the
FuelMaxx module.
As the core of the RideMaxx fuel-
management system, FuelMaxx is the
brain. It is programmed to offer you the
best possible riding experience without
sacrifice. It is engineered with your specific
needs in mind.
10
RideMaxx Quick Start Guide 11
Softail FuelMaxx Installation
FuelMaxx on Softails
The ECU Plug-in Module Installation for Softails
1. Remove your seat by unscrewing the securing bolt.
—Consult your bike’s manual for your specific seat removal instruction.
Prior to installation, please ensure that the ignition of your bike is turned off.
2. Using a 3/16˝ Allen Wrench, unbolt
all four ECU bolts and remove the ECU
while still attached to the ECU connector.
—Consult your bike’s manual for your specific
ECU removal instruction.
Softail install continued on page 14…
Ensure the ECU tray is located
at the maximum height on the
fender. is allows for needed clearance of
the FuelMaxx module.To do this, loosen the
bolts with a 3/8˝ wrench and slide the tray
up the fender. Retighten the bolts once in
position.
12
RideMaxx Quick Start Guide 13
Bagger FuelMaxx Installation
FuelMaxx on Baggers
The ECU Plug-in Module Installation for Baggers
1i. Open your right side saddle bag and turn the two thumb screws to loosen and
remove the saddle bag. is allows access to the cowling beneath and ECU in turn.
—Consult your manual for specific bag removal instruction.
2i. Remove the side cowling that is
behind the right side saddle bag to gain
access to the ECU.
2ii. Using a 3/16˝ Allen Wrench,
unbolt all four ECU bolts and remove
the ECU while still attached to the ECU
connector.
Prior to installation, please ensure that the ignition of your bike is turned off.
FuelMaxx Installation14
RideMaxx Quick Start Guide 15
4. Remove the RideMaxx locking
nameplate from the FuelMaxx module
using the included 1/16˝ hex driver.en
plug FuelMaxx into the ECU as shown.
5. Plug the ECU connector into
the open side of RideMaxx FuelTuner.
3. Unclip the Delphi connector that plugs into the ECU.
—Squeeze the release tab and wiggle it off.
Continued FuelMaxx installation…
Ensure a tight fit is achieved and the
release tab clips to FuelMaxx.
FuelMaxx Installation16
RideMaxx Quick Start Guide 17
6. Using a 3/16˝ Allen Wrench, bolt
the ECU back down to the ECU tray.
6i.Using a 3/16˝ Allen Wrench, bolt
the ECU back down to the ECU tray.
7i.Using the included driver, replace
the RideMaxx locking nameplate.
Softail Installation
Remounting the ECU and FuelMaxx
Bagger Installation
Remounting the ECU and FuelMaxx
Consult your bike’s manual for your specific ECU reinstall instruction. Ensure
a tight fit to the ECU tray and the nameplate is seated flush and bolted securely.
Warning—Do not overtighten. Stripping inserts voids warranty.
Consult your bike’s manual for your specific ECU reinstall instruction. Ensure
a tight fit to the ECU tray and the nameplate is seated flush and bolted securely.
Warning—Do not overtighten. Stripping inserts voids warranty.
7. Using the included driver, replace
the RideMaxx locking nameplate.
RideTuner Installation18
RideMaxx Quick Start Guide 19
RideTuner Installation
The handlebar-mounted control module installation
1. With the included RideMaxx 3/32˝
driver, remove the two bolts holding the
RideTuner together.
2. Separate the bottom half from the
top half without bending and remove
both semi circle gaskets.
3. Remove the rubber battery retainer
by gently peeling to expose the battery
tray inside. Insert the battery.
4. Place the tray liner back into the
battery tray of the RideTuner.
Note—polarity indication is in the battery tray for proper battery orientation.
Properly align and seat the rubber liner edges to secure a water tight fit.
Your battery is not under warranty; consult the warranty(pg.30) for details and the
battery information(pg.28) for acceptable replacements.
Table des matières
Manuels Accessoires pour motos populaires d'autres marques
SRC
SRC B-TRK502-01-01-SL Manuel utilisateur
3M
3M Speedglas 9100 MP Manuel utilisateur
hepco & becker
hepco & becker 6307520 00 01 Manuel utilisateur
HOMCOM
HOMCOM AA0-077 Manuel utilisateur
hepco & becker
hepco & becker 6307558 00 01 Manuel utilisateur
Wunderkind Custom
Wunderkind Custom 106503-F15 Guide de l'utilisateur
