American Dynamics Tyco AD9410 Manuel utilisateur

COLOR MONITOR

AD9410

AD9414

AD9421A

User’s Guide

Mode d’emploi

Bedienungsanleitung

Guía del usuario

Manual de utilizador

COLOR MONITOR User’s Guide

e-2

Explanation of Symbols

The triangle with lightning symbol represents the pres-

ence of uninsulated, dangerous voltage within the prod-

uct’s enclosure. This high voltage poses a risk of electric

shock to the user.

The triangle with exclamation point represents important

operating and maintenance (service) instructions found in

the manuals included with the product.

Warning-To Prevent Fire or Shock Hazard

Do Not Expose This Monitor To Rain or Moisture.

roduct specification is subject to change without notice.

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

COLOR MONITOR User’s Guide Contents

e-3

Contents

Important Safeguards .............................................. e-4

General .................................................................... e-8

Specifications .......................................................... e-9

Front anel Components and Controls ................. e-10

Rear anel Components and Controls .................. e-12

Connections ........................................................... e-13

Maintenance .......................................................... e-14

COLOR MONITOR User’s Guide IMPORTANT SAFEGUARDS

e-4

IMPORTANT SAFEGUARDS

Warning

The power source is located on the rear of the set. It contains high-voltage

parts. If you remove the cover it may cause fire or electric shock. Do not

remove the cover by yourself. (Control switches are at the front of the moni-

tor).

1. Read Instructions : All the safety and operating instructions

should be read before the monitor is operated.

2. Retain Instructions : The safety and operating instructions

should be kept for future reference.

3. Heed Warnings : All warnings on the monitor and in the oper-

ating instructions should be followed.

4. Follow Instructions : All operating and use instructions should

be followed.

5. Cleaning : Unplug this monitor from the wall outlet before

cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth

for cleaning.

Note. The monitor may be used in a situation where uninterrupt-

ed service is required. In these situations, such as the possibility

of loss of an authorization code for a CATV converter, the user

may disregard the instructions to unplug the monitor for clean-

ing purposes noted in Item 5.

6. Attachments : Do not use attachments not recommended by

Sensormatic as they may cause hazards.

7. Water and Moisture : Do not use this monitor near water.

For example, do not use near a bath tub, in a wet basement, near

a swimming pool, or in any environment where the monitor is

may get wet.

COLOR MONITOR User’s Guide IMPORTANT SAFEGUARDS

e-5

8 Accessories : Do not place this monitor on an unstable cart,

stand, tripod, bracket or table. The monitor may fall, causing

serious injury to a child or adult, and serious damage to the

monitor. Use only with a cart, stand, tripod, bracket or table rec-

ommended by Sensormatic, or sold with the monitor. Any

mounting of the should follow Sensormatic instructions and

should use a mounting accessory recommended by Sensormatic.

9. Ventilation : Slots and openings in the cabinet are provided for

ventilation, to ensure reliable operation of the monitor, and to

protect it from overheating. These openings should never be

blocked by placing the monitor on a bed, sofa, rug, or other sim-

ilar surface. This monitor should never be placed near or over a

radiator or heat register.

This monitor should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or

Sensormatic’s instructions have been adhered to.

10. Power Sources : This monitor should be operated only from the

type of power source indicated on the manufacturing label. If

you are not sure of the type of power supply to your installation

site, consult your Sensormatic dealer or local power company.

11. Grounding or Polarization : Some monitors are equipped with

3-prong grounded plugs. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert

the plug into the outlet, contact your electrician to replace the

obsolete outlet. Do not attempt to defeat the safety purpose of

the grounding-type plug.

12. Power Cords : ower supply cords should be routed to prevent

the ability to walk on the cord or pinch the cord by placing items

on or against them. ay particular attention to cords at the plugs,

outlets, and the point where the cord exits from the monitor.

13. Lightning : For added protection for this monitor during a light-

ning storm, or when it is left unattened and unused for long peri-

ods of time, unplug it from the wall outlet and disconnect the

cable system. This will prevent damage to the monitor due to

lightning and power-line surges.

14. Overloading : Do not overload wall outlets and extension cords

as this can result in a risk of fire of electric shock.

COLOR MONITOR User’s Guide IMPORTANT SAFEGUARDS

e-6

15. Object and Liquid Entry : Never push objects of any kind into

this monitor through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock.

Never spill liquid of any kind on the monitor.

16. Servicing : Do not attempt to service this monitor yourself as

opening or removing covers may expose you to dangerous volt-

age or other hazards. Refer all servicing to qualified service per-

sonnel.

17. Damage Requiring Service : Unplug this monitor from the

wall outlet and refer repair to qualified service personnel under

the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilt, or objects have fallen into the

monitor.

c. If the monitor has been exposed to rain or water.

d. If the monitor does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions. Improper adjustment of

other controls may result in damage to the monitor. Such

damage will often require extensive work by a qualified tech-

nician to restore the monitor to normal operation.

e. If the monitor has been dropped or the cabinet has been dam-

aged.

f. When the monitor exhibits a noticeable change in perfor-

mance – this indicates a need for service.

18. Replacement Parts : When replacement parts are required, be

sure the service technician has used replacement parts specified

by Sensormatic or have the same characteristics as the original

parts.

Unauthorized substitutions may result in fire, electric shock or

other hazards.

19. Safety Check : Upon completion of any service or repairs to this

monitor, ask the service technician to preform safety checks to

determine that the monitor is in proper operating condition.

COLOR MONITOR User’s Guide IMPORTANT SAFEGUARDS

e-7

FCC & ICES Information

Warning

This equipment has been tested and found to comply the limits for a

Class A digital device, pursuant to art 15 of the FCC Rules and

ICES-003 of Industry Canada. These limits are designed to provide

reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment gen-

erates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interfer-

ence in which case the user will be required to correct the interfer-

ence at his own expense.

User/Installer Caution

Your authority to operate this FCC verified equipment could be void-

ed if you make changes or modifications not expressly approved by

the party responsible for compliance to art 15 of the FCC Rules.

COLOR MONITOR User’s Guide General

e-8

General

Scope

The information in this instruction manual covers the installation and

operation of the Color Monitors.

These units should be installed using approved materials and wiring

practices in accordance with the National Electrical Code and applic-

able local wiring ordinances.

Introduction

The Color Monitors produce high quality images on a screen with a

resolution of greater than 450 lines at center.

(14" : more than 360line,10" : more than 280line).

Designed primarily for industrial applications this monitor accepts

standard NTSC/ AL color input signals.

Operating controls (BRIGHTNESS, CONTRAST, COLOR, TINT,

SHAR , VOLUME) are located on the front panel. A power switch is

also located on the front panel.

A regulated power supply maintains excellent performance during

fluctuations in line voltage.

The Color Monitors are housed in a metallic black color cabinet

(with a black bezel around the screen).

COLOR MONITOR User’s Guide Speci ications

e-9

Specifications

Model

System

CRT

Horizontal resolution

Input signal

Subcarrier

frequency sync. range

Horizontal frequency stability

Vertical frequency stability

High voltage

Convergence

ower consumption

Operating humidity condition

Operating temperature range

ower

Dimensions (W X D X H)

Weight

Audio

AD9410

NTSC/ AL

10-inch diagonal, 0.63mm

stripe pitch,

90° deflection

More than 280 lines

Video A/B : Compose 1Vp-p

Video C : S-VHS

3.579545MHz ± 400Hz

(room temperature)

4.433618MHz ± 400Hz

(room temperature)

15.75kHz ± 500Hz

15.625kHz ± 500Hz

60Hz ± 5Hz

50Hz ± 5Hz

18kV ± 2kV

less than 0.4mm

(at the center of display area)

50 watts (maximum)

0 to 90% (non-condensing)

0°C to 40°C (32°F to 104°F)

Control range of main

section 90V ~ 260V or

“Indicated on the rear of the

MONITOR set”

265mm x 260mm x 330mm

(without packing)

Approx. 8kg (with packing)

0.8s watts

AD9421A

NTSC/ AL

21-inch diagonal, 0.7mm

stripe pitch,

90° deflection

More than 450 lines

Video A/B : Compose 1Vp-p

Video C : S-VHS

3.5795MHz ± 400Hz

(room temperature)

4.433618MHz ± 400Hz

(room temperature)

15.75 kHz ± 500 Hz

15.625 kHz ± 500 Hz

60 Hz ± 4Hz

50 Hz ± 4Hz

25kV ± 1.5kV

less than 0.4mm

(at the center of display area)

70 watts (maximum)

0 to 90% (non-condensing)

0°C to 40°C (32°F to 104°F)

Control range of main

section 90V ~ 260V or

“Indicated on the rear of the

MONITOR set”

490mm x 444mm x 482mm

(without packing)

Approx. 25kg (with packing)

1 watts

AD9414

NTSC/ AL

14-inch diagonal, 0.66mm

Stripe itch,pitch.

90° deflection

More than 360 lines

Video A/B : Compose 1Vp-p

Video C : S-VHS

3.579545MHz ±400Hz

(room temperature)

4.433618MHz ±400Hz

(room temperature)

15.75kHz ± 500Hz

15.625kHz ± 500Hz

60Hz ± 5Hz

50Hz ± 5Hz

24kV ± 1kV

less than 0.4mm

(at the center of display area)

62 watts (maximum)

0 to 90% (non-condensing)

0°C to 40°C (32°F to 104°F)

Control range of main

section 90V ~ 260V or

“Indicated on the rear of the

MONITOR set”

365mm x 342mm x 391mm

(without packing)

Approx. 12kg (with packing)

0.7watts

Monitor will operate on NTSC or AL video standard.

The monitor is self-adjusting to NTSC/ AL and voltage 100~240V.

COLOR MONITOR User’s Guide Front Panel Components and Controls

e-10

Front Panel Components and Controls

Power Switch

On/off switch. If you press this button, the monitor is turned on and

the LED of selected input signal is lit.

VIDEO Input Selection Switch

It selects video and audio input signal. To change input signal, press

this button.

VOLUME DATA Control Switch

VOLUME key has two functions :

• Volume Controls : To change volume, press only these keys.

• Data Controls If you press CONTRAST, BRIGHT, COLOR,

TINT or SHAR and then a VOLUME key,

you can change the setting for each control.

SHARP TINT COLOR BRIGHT CONTRAST VOLUME

DATA

ABC

VIDEO POWER

SHARP TINT COLOR BRIGHT CONTRAST VOLUME

DATA

GRN : A

ORG : B

VIDEO POWER

CONTRASTSHARP TINT COLOR BRIGHT VOLUME

DATA

POWER

VIDEO A

POWER

VIDEO

VOLUME

DATA

AD9421A

AD9414

AD9410

Autres manuels pour Tyco AD9410

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels American Dynamics Moniteur

American Dynamics

American Dynamics ADMNLCD20RK Manuel utilisateur

American Dynamics

American Dynamics Tyco AD9410 Manuel utilisateur

American Dynamics

American Dynamics Tyco AD917A Manuel utilisateur

American Dynamics

American Dynamics ADLCD10PPS1WM Manuel utilisateur

American Dynamics

American Dynamics AD9421 Manuel utilisateur

American Dynamics

American Dynamics 46 and 50-inch Manuel utilisateur

American Dynamics

American Dynamics ADMCRT15 Manuel utilisateur

American Dynamics

American Dynamics 42 Manuel utilisateur

American Dynamics

American Dynamics Tyco AD920A Manuel utilisateur

American Dynamics

American Dynamics Tyco HS-CM217 Manuel utilisateur

American Dynamics

American Dynamics ADMNM1LCD15 Manuel utilisateur

American Dynamics

American Dynamics RM117S Manuel utilisateur

American Dynamics

American Dynamics AD950B Manuel utilisateur

American Dynamics

American Dynamics Tyco HS-CM217 Manuel utilisateur

American Dynamics

American Dynamics Tyco AD917A Manuel utilisateur

American Dynamics

American Dynamics ADMCRT15 Manuel utilisateur

American Dynamics

American Dynamics ADMNLCD20 Manuel utilisateur

American Dynamics

American Dynamics Tyco ADCMLCD15 Manuel utilisateur

American Dynamics

American Dynamics AD9414 Manuel utilisateur

American Dynamics

American Dynamics AD9517B Manuel utilisateur

American Dynamics

American Dynamics ADMNLCD20 Manuel utilisateur

American Dynamics

American Dynamics LCD Manuel utilisateur

American Dynamics

American Dynamics ADMNM19LCD Manuel utilisateur

American Dynamics

American Dynamics AD9615V Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation