American Dryer Corp. AD-24 II Manuel utilisateur
AD-24 II Parts Manual
24 VAC Phase 5
as of July 17, 2000
American Dryer Corporation
88 Currant Road
Fall River, MA02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
082500MFM/calbert ADC Part No. 450341
Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
AD-24 II
Phase 5 Coin Microprocessor Control PanelAssembly ........................................................................... 3
Phase 5 OPL Microprocessor Control PanelAssembly ........................................................................... 4
Phase 5 Microprocessor Control BoxAssembly
For Coin and OPL Models ............................................................................................................... 5
Microprocessor Coin VaultAssembly ...................................................................................................... 6
Main Door “Steel”Assembly .................................................................................................................. 7
Slide Meter CaseAssembly ................................................................................................................ 8, 9
Cold Rolled Steel (CRS) Front Panel Assembly .................................................................................... 10
Main Door SwitchAssembly (Cold Rolled Steel [CRS] Type Door) ...................................................... 11
Basket (Tumbler)/SupportAssemblies ................................................................................................... 12
Lint DoorAssembly .............................................................................................................................. 13
Sensor BracketAssemblies ............................................................................................................. 14, 15
Control Door (25¢ Coin Models)
For Models Mfd. as of March 17, 2001 ......................................................................................... 16
Control Door (25¢ Coin Models)
For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 17
Control Door (Slide Meter Models)
For Models Mfd. as of March 17, 2001 ......................................................................................... 18
Control Door (Slide Meter Models)
For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 19
Control Door (OPL and Non 25¢ Coin Models)
For Models Mfd. as of March 17, 2001 ......................................................................................... 20
Control Door (OPL and Non 25¢ Coin Models)
For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 21
Control DoorAssembly
For Models Mfd. prior to January 24, 2001 .................................................................................... 22
Table of Contents
Basket (Tumbler) BearingAssembly
For Models Mfd. as of April 27, 2001 ............................................................................................23
Basket (Tumbler) BearingAssembly
For Models Mfd. prior toApril 27, 2001 .................................................................................. 24, 25
Lint TrapAssembly ............................................................................................................................... 26
Idler BearingAssembly ......................................................................................................................... 27
Electric OvenAssembly .................................................................................................................. 28, 29
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor MountAssembly ......................................................... 30
Gas BurnerAssembly ........................................................................................................................... 31
Sail Switch/Hi-LimitAssemblies ............................................................................................................ 32
Single-Phase (1Ø) Motor, Electric Relay PanelAssembly ...................................................................... 33
Slide Meter Control BoxAssembly ....................................................................................................... 34
Outer Top/Back GuardAssemblies ....................................................................................................... 35
Electric Oven ComponentApplication Chart ......................................................................................... 36
Additional PartsAvailable ..................................................................................................................... 37
3
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard Label Assembly
2 880959 1 Phase 5 Coin Microprocessor Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, 6, and 11)
880958 1 Coin Control Panel ONLY
3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Controller
824998 1 Phase 5 Battery Clip
5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 881163 1 Microprocessor Coin Acceptor with Optical Switch
8 881143 1 Optical Switch
9 137023 1 Optical Switch Connector
10 137021 3 Microprocessor Socket
--- 880772 1 Single Coin Optic Switch Harness
--- 824080 1 Dual Coin Optic Switch Harness
--- 122800 1 Microprocessor (female) Pin Extraction Tool
11 136048 1 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
Phase 5 Coin Microprocessor Control Panel Assembly
4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-On Labels (English Only) ... Not Illustrated
112275 1 OPL Stick-On Labels (Spanish, Italian, and Hebrew) ... Not Illustrated
112277 1 3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew) ... Not Illustrated
112278 1 5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
2 801225 1 Phase 5 Microprocessor Control Panel ONLY
824443 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 7)
3 137222 1 Phase 5 OPL Non-Reversing Controller
824998 1 Phase 5 Battery Clip
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
882541 1 Spring Turn Latch Assembly
7 136048 1 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
Phase 5 OPL Microprocessor Control Panel Assembly
5
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty.Description
1 141403 1 24 VAC Transformer
2 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 120715 1 30-Position Terminal Block
4 150002 2 #6-32 x 1” Round Head Machine Screw
5 151000 2 #6-32 Pal Nut
6 136057 * 1/2-Amp (Slo-Blo) Fuse ONLY
7 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
8 136008 * Fuse Block/Strip
9 122641 1 15-Pin Microprocessor Connector
10 122706 * Socket Terminal
11 305542 1 Battery Bracket
12 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
* As required.
Phase 5 Microprocessor Control Box Assembly
For Coin and OPL Models
6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Microprocessor Coin Vault Assembly
Illus. No. Part No. Qty.Description
1 802146 1 Security Coin Vault Assembly Complete
(includes illus. nos. 1 through 3)
802139 1 High Security Coin Vault ONLY
2 160027 1 High Security Lock with Key (each keyed different)
160127* 1 Key ONLY For High Security Lock
160022 1 High Security Screw Lock with Key
160113* 1 Key ONLY For High Security Screw Lock
3 802138 1 High Security Coin Box Assembly with Lock
(includes illus. nos. 2 and 3)
802147 1 High Security Coin Box ONLY
4 153050 4 1/2” S.A.E. Flat Washer
5 152014 4 1/4-20 Free Spin Wash Nut
6 102502 1 Control Door Support Rod
7 102601 1 Control Door Rod Retainer Clip
8 102603 1 Control Door Support Rod Catch
* Specify key number when ordering.
7
Telephone: (508) 678-9000 Fax: (508) 678-9447
Main Door “Steel” Assembly
Illus. No. Part No. Qty.Description
1 881150 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
150443 2 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle ONLY
170333 1 Stainless Steel Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass
102360 1 Glass/Door Gasket Tape
(for models mfd. as of February 9, 2001)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
(for models mfd. prior to February 9, 2001)
8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Slide Meter Case Assembly
Table des matières
Autres manuels American Dryer Corp. Séchoir
American Dryer Corp.
American Dryer Corp. ID-170 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-310 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-78 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. HB76 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. Milnor M50SL Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-120ES II Manuel utilisateur
American Dryer Corp.
American Dryer Corp. ADE-50S Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-75D II Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-120ES II Manuel utilisateur
American Dryer Corp.
American Dryer Corp. CE 96-190 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. ADG-758 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-400 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. ADS-464 II Guide de l'administrateur
American Dryer Corp.
American Dryer Corp. AD-540 Manuel
American Dryer Corp.
American Dryer Corp. Phase 7 Gas/Steam AD-464 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-360X2 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. Aquatex AD-76 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-285 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. MLG-130DR (HSI) Manuel utilisateur
American Dryer Corp.
American Dryer Corp. Phase 7.4.2 DMC None Manuel utilisateur
American Dryer Corp.
American Dryer Corp. AD-75T Guide de l'administrateur
American Dryer Corp.
American Dryer Corp. AD-100 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. Non-Tilting AD-200 Manuel utilisateur
American Dryer Corp.
American Dryer Corp. Gas/Electric/Steam AD-75HS Manuel utilisateur
Manuels Séchoir populaires d'autres marques
Indesit
Indesit IDV 75 Manuel utilisateur
Infiniton
Infiniton SD-DG85C Manuel utilisateur
BOMANN
BOMANN WT 5019 Manuel utilisateur
Alliance Laundry Systems
Alliance Laundry Systems TMB795C Manuel utilisateur
Asko
Asko T793C Manuel utilisateur
Kenmore
Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manuel utilisateur