AmazonBasics 50 FT Manuel utilisateur

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the

following:

a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS

b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor

use. When products are used in outdoor applications, connect the products to a Ground

Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualiﬁed electrician

for proper installation.

c) This seasonal use product is not intended for permanent installation or use.

d) Do not mount or place near gas or electric heaters, ﬁreplace, candles or other similar

sources of heat.

e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or

nails.

f) Do not let lamps rest on the supply cord or on any wire.

g) Unplug the product when leaving the house, when retiring for the night or if left

unattended.

h) This is an electrical product-not a toy! To avoid risk of ﬁre, burns, personal injury and

electric shock it should not be played with or placed where small children can reach it.

i) Do not use this product for other than its intended use.

j) Do not hang ornaments or other objects from cord, wire or light string.

k) Do not close door or windows on the product or extension cord as this may damage the

wire insulation.

l) Do not cover the product with cloth, paper or any material not part of the product when in

use.

m)This product has a polarized plug (one blade is wider than the other) as a feature to

reduce the risk of electric shock. This plug will ﬁt in a polarized outlet only one way. If the

plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed

electrician. Do not use with an extension cord unless plug can be fully inserted. Do not

alter or replace plug.

o) Installing bulbs: Ensure that the base of the bulb is fully threaded into the socket by

rotating clockwise. The base of the bulb should be sealer securely to the top of the

socket.

p) This product employs overload protection (fuse). A blown fuse indicates an overload

or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also

unplug any additional strings or products that may be attached to the product. Replace

the fuse as per the user servicing instructions (follow product marking for proper fuse

rating) and check the product. If the replacement fuse blows, a short-circuit may be

present and the product should be discarded.

q) Read and follow all instructions that are on the product or provided with the product.

r ) SAVE THESE INSTRUCTIONS

Use and Care Instructions

a) When the product is placed on a live tree, the tree should be well maintained and fresh.

Do not place on live trees in which the needles are brown or break off easily. Keep the

tree holder ﬁlled with water.

b) If the product is placed on a tree, the tree should be well secured and stable.

c) Before using or reusing, inspect product carefully. Discard any product that have cut,

damaged or frayed wire insulation or cords, cracks in the lamp holders or enclosures,

loose connections, or exposed copper wire.

d) When storing the product, carefully remove the product from wherever it is placed,

including trees, branches, or bushes, to avoid any undue strain or stress on the product

conductors, connections and wires.

e) When not in use, store neatly in a cool, dry location protected from sunlight.

IMPORTANT SAFETY INSTRUCTIONS

If connecting to a lighting string that does not have a Wattage (W) rating (found on the tag

within 6 inches of the plug) calculate the wattage as follows: Multiply the current (___A)

which is on the ﬂag-type tag by 120.

For example: Lighting string is rated 120V, 60Hz, 0.2 Amps. 0.2 X 120 = 24 Watts.

Add the wattage of each light string together for a total of 420 Watts or less.

(Do not exceed 420 Watts)

User Servicing instructions

CAUTION

1. Replace only with the same type 5 Watt Max intermediate-base UL classiﬁed lamps.

2. To reduce the risk of ﬁre do not deliberately reposition either lamp holder contact.

3. To reduce the risk of ﬁre and electric shock: a) Do not install on trees having needles,

leave or branch coverings of metal or materials which look like metal. And b) Do not

mount or support strings in a manner that can cut or damage wire insulation.

a) Grasp plug and remove from the receptacle or other outlet

device. Do not unplug by pulling on cord.

b) Open fuse cover. Slide open fuse access cover on top of

attachment plug towards blades.

c) Unscrew old bulb by rotating counterclockwise and removing

from socket.

d) Installing bulbs: Ensure that the base of the bulb is fully

threaded into the socket by rotating clockwise. The base of

the bulb should be sealer securely to the top of the socket.

e) Replace bulb with only 120 Volt, 5 Watt G40 type bulb.

f) Check fuse and replace if necessary.

g) Risk of ﬁre. Replace fuse only with 5 Amp, 125V fuse.

h) Close fuse cover. Slide closed the fuse access cover on

top of attachment plug.

i) Risk of ﬁre. Do not replace attachment plug. Contains a

safety device (fuse) that should not be removed. Discard

product if the attachment plug is damaged.

j) Disconnect the lighting string or decorative outﬁt from the

outlet before removing a lamp and replacing it with the

ornament.

Replacement Bulb

Speciﬁcations

Image

Type Globe-G40

Incandescent

E12-Candelabra

120

Construction

Bulb Base

Wattage

Volts

G40 Bulbs

Model No. LA(P)C-O505S

1 Year Limited Warranty

The Product is warranted against defects in materials and workmanship under normal

use and service for a period of one (1) year from the date of original purchase when

delivered to you in new condition in its original container. Warranty repair or replacement

shall not extend the original warranty period of the Product. A dated proof of purchase is

required at the time of warranty service. A copy of your dated bill of sale will satisfy this

requirement. This warranty does not cover accessories or consumables, such as light

bulbs, as to which there shall be no warranty or replacement.

This limited warranty covers all defects encountered in normal use of the Product and

does not apply to the following cases:

1. Loss of or damage to the Product due to abuse, neglect, mishandling, improper

packaging by you, alteration, accident, electrical current ﬂuctuations, improper use,

failure to follow operating or maintenance instructions prescribed in AmazonBasics safety

instructions or other documentation. Dropping the Product, scratches, and abrasions will

be presumed to have resulted from misuse, abuse or failure to operate the Product as

set forth in the user’s manual or other documentation for the Product.

2. Use of other parts or supplies (other than those sold by AmazonBasics) that cause

damage to the Product

3. If the Product has had its model number or dating defaced, altered or removed.

SAVE THIS MANUAL. Keep this manual for assembly, operating, maintenance,

inspecting and cleaning purposes.

Patio String Lights, 50 FT, Installtion Guide

WARNING: Read ENTIRE manual before using this product. Failure to do so may

result is serious injury or harm.

While unpacking this product, make sure the item is complete and undamaged. Please

contact Amazon support if any parts appear to be missing or broken.

WARNING: This product can expose you to chemicals including lead, which is known

to the State of California to cause cancer and birth defects or other reproductive

harm. For more information go to www.P65Warnings.ca.gov.

1. KEEP OUT OF REACH OF CHILDREN

2. For temporary (90 days max) installation and use only.

3. For indoor and outdoor use.

4. To reduce the likelihood of excessive heat and possible damage, use only decorative

lamp accessories packaged with this product.

5. This is a parallel-connected lighting string.

6. To reduce risk of electric shock, DO NOT connect or disconnect when wet.

7. DO NOT use with extension cord near water or where water may accumulate.

8. Keep lamps at least 16 feet (4.8m) from pools and spas

9. Keep plugs and receptacles dry; DO NOT submerse

10.Lighting strings are rated for 120V, 60 Hz; DO NOT EXCEED 840 total watts, all strings

combined. Do not connect more than three (3) 50-Foot strings together or exceed 150

total bulbs.

11.Female connector is to be used ONLY for additional light sets.

WARNINGS AND SAFETY INFORMATION

NOTICE: The warnings and precautions included in this manual do not cover all

conceivable scenarios and outcomes. The operator must exercise caution and common

sense when installing and operating this product.

CAUTION:

1. DO NOT secure cords with staples or nails.

2. If changing to a new location, remove bulbs before installation.

3. INSPECT set up and product condition before each use.

4. Keep bulbs at least 3 inches from other objects.

INSTALLATION

(Hardware, hooks, cable ties and guiding wire are not included.)

1. Hang your String Lights in the desired location, ensure all bulbs are properly secured into

their sockets.

2. Plug String Light into power outlet.

NOTICE: When connecting multiple cords together, create a knot with the cord ends

as shown below or use a plug protector to prevent the plugs from pulling apart

during use.

CARE INSTRUCTIONS:

Clean String Light only with a dry, soft cloth. Do NOT use abrasive cleaners.

TROUBLESHOOTING

INSTALLING/REPLACING LIGHT BULBS

Installing Bulbs:

Issue

Light did not

come on initially

or no longer

comes on.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by

pulling on cord.

2. Unscrew old bulb by rotating counterclockwise and removing from socket.

3. Install new bulb. Ensure that the base of the bulb is fully threaded into the socket by

rotating clockwise. The base of the bulb should be sealed securely to the top of the socket.

1. Bulb is burnt out/damaged

2. Bulb is not properly installed

3. String Light fuse blown

4. String Light is not plugged in

1. Replace bulb

2. Reinstall bulb

3. Replace fuse

4. Plug String Light into outlet

Possible Source Resolution

WARNING: To prevent serious injury, unplug String Light from electrical outlet

before installing/replacing bulbs or fuses. Allow bulbs to cool down before touching.

1st String

Light Cord

2nd String

Light Cord

WARNING: Ensure that your replacement bulb ﬁts securely into the bulb socket.

Incorrectly ﬁtting bulbs will not seal socket properly and may cause injury or death from

shattered glass or electric shock.

Prior to purchase of replacement bulbs, please make sure to meet the below speciﬁcations.

G40 replacement bulbs may be purchased at local hardware stores or on Amazon.com.

1. These lighting strings are rated for 120V, 60 Hz; DO NOT EXCEED 840 total watts, all

strings combined. Do not connect more than three (3) 50-Foot strings together or

exceed 150 total bulbs.

2. This lighting string is rated 250 Watts (2.08 Amps), do not overload.

3. Connect other lighting strings or decorative outﬁts end-to-end up to a maximum of

840 Watts (7 Amps) total.

4. When connecting multiple sets, protect connections from direct exposure to rain and

water. DO NOT allow connection to become wet.

5. When joining 25FT and 50FT strings, either string can be connected directly to the outlet.

6. When joining 25FT and 25FT strings, do not exceed 432 total watts.

7. When joining 25FT and 50FT strings, do not exceed 432 total watts.

8. When joining 50FT and 50FT strings, do not exceed 840 total watts.

CAUTION: Replace lamp with only 120 Volt, 5 Watt G40 Incandescent type lamp.

CAUTION—For connecting multiple strings:

Replacing Bulbs:

Replacement Bulb

Speciﬁcations

Image

Type Globe-G40

Incandescent

E12-Candelabra

120

Construction

Bulb Base

Wattage

Volts

G40 Bulbs

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by

pulling on cord

2. Slide open panel fuse door on top side of male connector plug

3. Remove replacement fuse(B) using a ﬂathead screwdriver

4. Replace fuse(A) with Fuse(B)

5. Close cover and discard of fuse(A)

CAUTION: Discard String Light if the connector plug is damaged.

INSTALLING/REPLACING FUSES:

OPEN

OUVRIR

(B) (A)

OPEN

OUVRIR

Slide to

Open

(B) (A)

(A)

(B)

OPEN

OUVRIR

Slide to

(B)

Table des matières

Autres manuels AmazonBasics Équipement d'éclairage

AmazonBasics

AmazonBasics B08441B3D Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur