Amazfit GTR Mini Manuel utilisateur

1/29

Amazfit GTR Mini User Manual

Connection and pairing

Use your phone to scan the QR code in the manual or on the device, and download

and install the Zepp app. For a better user experience, update the app to the latest

version as prompted.

Note: The operating system of your mobile phone must be Android 7.0 or iOS 12.0,

or later.

Initial pairing:

When the device is started for the first time, the QR code used for pairing will be

displayed on the screen.

Open the Zepp app on your phone, log in to the app, and scan the QR code

displayed on the device to pair your phone with the device.

Pairing with a new phone:

1. Open the app on your old phone and synchronize data with the device.

2. On the old mobile phone, go to Profile >Amazfit GTR mini page and tap the

Unpair button at the bottom to unbind. If it is an iPhone, after unbinding in the Zepp

app, you need to unpair the phone and device. Go to Settings > Bluetooth, find the

Bluetooth name corresponding to the device, and tap the button on the far right of the

Bluetooth name. After entering the page, tap Ignore This Device.

3. Restore the factory settings of the device and then pair it with your new phone as

if it is paired for the first time.

2/29

Updating the system of your watch

Keep the device connected to your phone, open the Zepp app, go to Profile > Amazfit

GTR Mini > System Update to view or update the system of your device.

We recommend that you tap Update Immediately when your device receives a

system update message.

Wearing

1. Wear the watch strap not too tight or too loose, and leave enough space for the

skin to breathe. This makes you feel comfortable and allows the sensor to function.

2. When measuring blood oxygen, wear the watch correctly. Avoid wearing the

watch on the wrist joint, keep your arm flat, maintain comfortable (appropriately tight)

fitting between the watch and the wrist skin, and keep your arm still throughout the

measurement process. When affected by external factors (arm sag, arm sway, arm

hair, tattoo, etc.), the measurement result may be inaccurate or the measurement

may fail with no output.

3. We recommend that you tighten the watch strap during workout and loosen it

afterwards.

Basic operations

Common gesture operations

Operation

Corresponding result

Tap the screen

Uses a feature, selects the current item, or proceeds

with the next step

Press and hold the

watch face

Activates watch face selection and watch face settings

Cover the screen

Turns off the screen

Swipe from left to right

On most sub-level pages, returns to the upper-level

page

Swipe up or down on the

Scrolls or switches pages

3/29

screen

Press and hold the upper

button for five seconds

or longer

Powers on, accesses the restart page, and performs

force restart.

Control center

Swipe down from top to bottom on the watch face of the device to enter the Control

Center, where you can access system features of the device.

Supported features: Power Saving mode, DND, Sleep mode,Flashlight,Calendar,

Brightness,Theater mode, Settings, Keep Screen On,Screen Lock, and Find My

Phone.

Find the phone

1. Keep the device connected to your phone.

2. Swipe down from top to bottom on the watch face of the device to enter the

Control Center, and tap Find Phone Your phone will vibrate and ring.

3. In the app list, tap More, and then tap Find Phone. Your phone will vibrate and

ring.

Find the watch

Keep the device connected to your phone, open the Zepp app, and go to Profile >

Amazfit GTR Mini > Find Watch. Then, the device will vibrate.

Watch faces

Watch face compilations

Some watch faces support editing compilations. With compilations, you can view

steps, calories, weather, and other information, and edit the information as needed.

Edit watch face compilations:

1. Wake up the device, and press and hold the watch face to enter the watch face

selection page, where you can choose other watch faces or edit the watch face.

2. Swipe left or right to preview the watch faces available. The Edit button will be

4/29

displayed at the bottom of a watch face that supports compilations You can tap

this button to go to the page for editing the compilations of this watch face.

3. Select the compilation to edit, and tap this compilation, or swipe up and down on

the screen to switch between compilations.

4. After editing, and enable the current watch face.

Always On Display

If this feature is enabled, the screen still displays time and some information of the

watch face in standby mode, which greatly reduces the battery life.

Set Always On Display:

1. Wake up the device, press the side button to open the app list. Then, go to

Settings > Display > Always On.

2. Select the watch face style and enable status for Always On Display.

Add watch faces

The device provides several watch faces by default. You can also go to the Store in

the Zepp app to synchronize online watch faces to the device, or set a picture on the

phone as a customized watch face picture in the Zepp app.

Add online watch faces:

1. Keep the device connected to your phone, open the Zepp app, and go to

Profile > Amazfit GTR Mini > Watch Faces.

2. Select one or more watch faces you like, and then synchronize them to the

device to give yourself multiple options.

Add customized watch faces:

Keep the device connected to your phone, open the Zepp app, go to Profile > Amazfit

GTR Mini > Watch Faces > Custom Background, and tap your preferred style to

change background by selecting a photo from your phone’s Albums or taking a photo

with your phone’s camera.

Add a portrait watch face:

A portrait watch face is a custom watch face that focuses on displaying the portrait. It

can automatically identify the portrait elements in the added photos and display them

by integrating the watch face elements. You can add up to 3 photos for one watch

face. Tap the watch face or raise your wrist to switch the photo on the watch face.

Open the Zepp app, select the device, and tap Watch Faces > Portrait. Tap to add

the portrait photo (up to 3 photos), and the position of the time can be adjusted

5/29

separately for each photo. Select the time style and the features displayed at the top

and bottom of the watch face. Tap "Sync" to sync the watch face to the device. After

synchronization, tap the watch face on the device or raise your wrist to switch the

photo on the watch face. Go to Watch Faces > Mine > Purchase, and go to the

portrait watch face to edit it again. Tap "Sync" to sync the watch face after each edit.

Precautions: The photos you use when creating the watch faces are stored in the

app and your device. Please protect your personal data. Removing the watch face

will clear the local cache. It is recommended to use portrait photos with the size of

1200*840 and above, and a photo of one person with simple background is

recommended for better results. For iOS 12 and above, it is recommended to use

photos in portrait mode for better results.

Change watch faces

1. Wake up the device, and press and hold the watch face to go to the watch face

selection page.

2. Swipe left or right to preview the watch faces available on the current device,

including built-in watch faces and synchronized online watch faces.

3. Tap the desired watch face to replace the current watch face.

Delete watch faces

When the storage space on the device is almost full, you will need to delete some of

the watch faces to make room for new ones (retain at least one watch face).

1. Wake up the device, and press and hold the watch face to go to the watch face

selection page.

2. Swipe up or down to preview the watch faces available on the current device,

including built-in watch faces, synchronized online watch faces, and customized

watch faces.

3. Press and hold the watch face you want to delete. A delete button will

appear if the watch face can be deleted.

State points

The state point is displayed on the top of the watch face to indicate the functions

currently enabled on the device, such as Theater Mode turned on in device or the

Countdown app running in the background.

The supported display states are:

•Low battery

•Power saving mode

6/29

•DND mode

•Sleep mode

•Theater mode

•Stopwatch (tap the state point to go to the app)

•Countdown (tap the state point to go to the app)

•In workouts (tap the state point to go to the app)

•Charging

Notifications and Reminders

App alerts

Keep the device connected to your phone to receive phone app alerts on your device.

Swipe from left to right on the watch face page to enter the Notification Center and

view the latest 20 notifications. There is a Clear Notifications button at the bottom.

Clear all notifications:

There is a Clear button [icon] at the bottom of the notification list. Tap it to clear all

notifications.

Or, after the watch restarts, notifications will be automatically cleared.

Clearing a single notification:

When a notification is pushed, or after you open a specific notification from the

notification list, you can delete the notification by pressing the delete button at the

bottom.

Setting method:

Keep the device connected to your phone, open the Zepp app, go to Profile > Amazfit

GTR Mini > App Alerts, and then turn on notifications for apps as needed.

Note:

•To enable this feature on an Android phone, you need to add the Zepp app to the

allowlist or auto-run list in the phone's background so that the app always runs in the

background. If the Zepp app is terminated by the phone's background process, the

device will be disconnected from your phone, and you cannot receive app alerts on

the device.

•For iOS, there are limited apps that can be set in the Notifications and reminder

just after the device is activated. As the phone receives the notification messages

from more apps, more apps will be displayed in the Notifications and reminder of the

7/29

Zepp app.

Incoming call alerts

To enable this feature, open the Zepp app, and go to Profile > Amazfit GTR Mini >

App Settings > Phone > Incoming call. Once the feature is enabled, and while the

device and phone are connected, the device will display a prompt when the phone

receives a call, and you can ignore or hang up the call on the device.

Morning Updates

With Morning Updates enabled, the device will push updates every morning. You can

quickly view information such as today's weather, workout status, health status, and

personal affairs, and get prepared for the new day.

You can enable or disable the Morning Updates feature on the device under

Settings > Preferences > Morning Updates. You can also tap Content Settings to

adjust the content and display order in Morning Updates.

The above settings can also be accessed in the Zepp app under Profile > Amazfit

GTR Mini > Watch Settings > Morning Updates while keeping the watch connected to

the phone.

Shortcuts

Shortcut cards

Swipe right on the watch face to go to the Shortcut Cards page, where you can easily

use and view various features and information:

You can add frequently used feature cards to Widget for more convenient access,

such as your latest event, next alarm, or recent BPM data.

You can also open the Zepp app and go to Profile > Amazfit GTR Mini > Shortcut

Cards, where you can set the content and the display order of the shortcut cards.

Quick access apps

Swipe from right to left to open Quick Access Apps. Quick Access Apps allow you to

conveniently access device features. You can also add your frequently used apps

and features to the Quick Access Apps.

Change quick access apps:

8/29

1. Wake up the device, press the side button to open the app list. Then, go to

Settings > Preferences > Widget, and swipe up or down to view the apps that can be

set as quick access apps.

2. When the number of "Current apps" reaches the upper limit, remove redundant

apps and add the ones you need.

Press buttons for quick start-up

Press and hold the watch side button to quickly open an app. You can go to the

watch Settings>Preferences>Long Press Side Button to change the quick start-

up app.

Workouts

Workout modes

The device supports more than 120 workout modes, including Running & Walking,

Cycling, Swimming, Outdoor Workouts, Indoor Workouts, Dance, Combat Workouts,

Ball Workouts, Water Workouts, Winter Workouts, Leisure Workouts, Board & Card

Games, and Others.

Workout list

1. Tap Workout in the app to go to the workout list.

2. Tap the workout to start in the workout list.

3. Select More Workouts to view all workout modes and start a workout.

Select a workout

In the workout list, swipe up or down on the screen to select the workout you need,

and then tap the workout to enter the corresponding workout preparation page.

Start a workout

After entering the workout preparation page, for workouts that require positioning, the

watch will automatically search for a GPS signal. The red status bar indicates that the

watch is searching for a signal, and the green status bar indicates that signal is found.

We recommend that you tap the green status bar to start the workout after a

successful GPS positioning, which can improve the accuracy of workout data

9/29

calculation.

For workouts that do not require positioning, you can directly tap the green status bar

on the workout preparation page to start the workout.

Workout operations

Turn pages during a workout

During a workout, you can either swipe up or down on the screen to turn pages.

Swipe left or right to turn page left or right. The workout operations page is on the left

side of the workout data page, where you can pause or end the workout. On the right

side of the workout data page, you can control music playback on the mobile phone.

Workout screen lock status

After auto screen lock is enabled, the screen will turn off during workouts/in AOD

mode/when the screen times out, and the status bar will display the icon.

When this happens, you will not be able to operate the touch screen. You must press

the button to unlock the touch screen before any operation, or you can directly press

the button to perform workout operations.

For swimming, the touch screen will be continuously disabled during the workout,

and can only be used after you press the button to unlock the screen.

Workout operations page

1. Pause/resume

Tap to enter the workout pause/resume page.

2. End

Press and hold the End button to end the current workout and save the data.

10 /29

3. Resume later

Press to save the current workout and return to the watch face. Enter the workout

app again to return to the workout

4. Auto screen lock

After the auto screen lock is turned on, the screen will lock after being active for the

Screen-on Duration during a workout. Touchscreen interaction is deactivated, but you

can unlock the screen as prompted (during a swimming workout, the auto screen

lock is turned on by default).

Workout settings

On the workout preparation page, you can swipe up to go to the workout settings

page to set the current workout mode. The related parameters vary depending on the

workout mode.

Workout assistant

The workout assistant provides auxiliary tools for your workout, including the workout

goals, workout alerts , auto laps, auto pause, cadence assistant, and virtual pacer.

Auxiliary features provided by the workout assistant vary depending on workouts.

Workout goals

You can set workout goals, such as the duration, distance, and calorie goal. The

device displays the current goal progress in real time during workouts. A message

displays upon you achieve the preset workout goal. Workout goals vary depending

on workouts.

Workout alerts

In this setting, you can set various reminders according to your needs, such as

Distance Reminder, Heart Rate Reminder, etc. Workout alerts vary according to the

workout.

1. Distance reminder

The device vibrates and displays the duration that you use for each full kilometer/mile

during the workout.

Go to Workout Mode > Workout Settings > Workout Alerts > Distance, set a target

distance, and enable or disable this feature.

2. Safe heart rate reminder

During a workout, if the device detects that your heart rate exceeds the safe heart

rate value you have set, it will vibrate and display a message on the screen. In this

Autres manuels pour GTR Mini

Table des matières

Autres manuels Amazfit Montre

Amazfit

Amazfit Verge Lite Manuel utilisateur

Amazfit

Amazfit GTR 2 Manuel utilisateur

Amazfit

Amazfit Stratos 3 Manuel utilisateur

Amazfit

Amazfit A2008 Manuel utilisateur

Amazfit

Amazfit Bip S Manuel utilisateur

Amazfit

Amazfit GTR Guide d'installation

Amazfit

Amazfit GTS 2 mini Manuel utilisateur

Amazfit

Amazfit Cheetah Pro Manuel utilisateur

Amazfit

Amazfit Bip 3 Pro Manuel utilisateur

Amazfit

Amazfit A2029 Manuel utilisateur

Amazfit

Amazfit Pace Manuel utilisateur

Amazfit

Amazfit Neo Manuel utilisateur

Amazfit

Amazfit GTS Manuel utilisateur

Amazfit

Amazfit Band 5 Manuel utilisateur

Amazfit

Amazfit GTS 2e Manuel utilisateur

Amazfit

Amazfit GTS 2 mini Manuel utilisateur

Amazfit

Amazfit Bip U Manuel utilisateur

Amazfit

Amazfit JHS20W2 Manuel utilisateur

Amazfit

Amazfit Band 7 Manuel utilisateur

Amazfit

Amazfit ACTIVE Manuel utilisateur

Amazfit

Amazfit T-Rex Manuel utilisateur

Amazfit

Amazfit Band 2 Manuel utilisateur

Amazfit

Amazfit T-Rex Ultra Manuel utilisateur

Amazfit

Amazfit A2040 Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur