Amana Key Lock kit Manuel utilisateur
CAUTION
PERSONAL RISK HAZARD
Underwriter’s Laboratories Inc. listed. For institu-
tional use only where supervisory monitoring is
available. Any other use may increase the risk of
personal injury or property damage.
1.Remove front from unit by pulling bottom out
and then lifting upward.
2.Loosen retaining screw by one-turn counter-
clockwise. Disengage door pins from housing
slots and remove door.
3.Insert the key lock assembly in the housing
slots. Tighten retaining screw one-turn clock-
wise. Do not overtighten.
The Key Lock kit prevents tampering of the controls used
to set temperatures and heating or cooling functions.
Made in USA
The installation and servicing of the equipment should be done by qualified experienced technicians.
Part No. 11113602
Printed in U.S.A. May 2003
P1 20 1702 R
Key Lock Assembly
Installation Instructions
Due to policy of continual product
improvement, the right is reserved to
change specifications and design
without notice.
KEY LOCK INSTALLATION INSTRUCTIONS
RETAINING
SCREW
Table des matières
Autres manuels Amana Accessoires
Amana
Amana VTC Series Instructions d'installation
Amana
Amana SUBBASE KIT Manuel utilisateur
Amana
Amana POWER VENT & DOOR KIT Manuel utilisateur
Amana
Amana EXTENDED WALL SLEEVE Manuel utilisateur
Amana
Amana Baffle Kit Manuel utilisateur
Amana
Amana TDK02 Manuel utilisateur
Amana
Amana DK9001D Manuel utilisateur
Amana
Amana PBWS01A Manuel utilisateur
Amana
Amana Standard Louvered Grille Manuel utilisateur
Amana
Amana IO-646 Manuel utilisateur
