ALZA Baseus Minipeng Manuel utilisateur
Baseus Minipeng Hand
Washing Machine
User’s guide
Dovozce
Alza.cz a.s.
Jankovcova 1522/53, Holešovice
170 00 Praha 7
www.alza.cz
2
Before using this product, please read this manual carefully and save it.
Product description
Product: Baseus Minipeng Hand Washing Machine
Working principle: automatic infrared sensor foaming hand washing machine
Main functions: accurate sensing, fast foaming, delicate foam
Using scenes: kitchen, bathroom, washroom and other hand-washing scenes
Product Features
1. The appearance is simple and beautiful.
2. Infrared automatic sensing, reaching out for foaming, with no need of pressing.
3. Two-gear touch adjustment, 0,6 s./1.0 s. dual-mode foaming, more convenient
for children and adults.
4. Rapid foaming in 0.25 s., the foam is dense and delicate.
5. Hand sanitizer is packaged separately, liquid is convenient for replacement.
6. Effectively antibacterial, refreshing and fragrant.
7. 4 double Alkaline batteries, can be used for up to 8 months.
Product Parameters
1. Main material: ABS
2. Size: 209.8 mm *93.3 mm
3. Working voltage: 6V
4. Working current: 240 mA
5. Rated power: 1.4W
6. Power supply mode: 4*AA alkaline batteries
7. Sensing distance: 4-5 cm
8. Product net weight: 220 g
9. Capacity: 300 ml
Product Executive Standards
GB4706.1-2005
3
Name of product parts
4
1. Switch / indicator light
2. Foam outlet
3. Sensing area
4. Body
5. Hand sanitizer sucker
6. Hand sanitizer
7. Battery compartment
8. Battery shrapnel A
9. Battery shrapnel B
5
Installation notes
1. Open the battery cover counter clockwise
2. Install the battery correctly according to the polarities (+/-) marked on the battery
compartment.
6
3. Align the unlocking mark on the battery cover with the cylindrical hole on the side
wall of the machine, turn the battery cover clockwise to lock and align with the
cylindrical hole.
4. Remove the hand sanitizer straw from the accessory, Insert the washing machine
suction hole.
7
5. Pour hand sanitizer into the bottle
6. Align the hand sanitizer with the bottom of the machine, and turn it
counterclockwise until it is firm.
8
Product Instructions
1. Touch the switch for the first time: touch the switch for 0.5 s., the white indicator
light continues to light up for 1.5 s., enter the sensing state, then reach out to
sense and enter the working state, and the foaming time is about 0.6 s.
2. Touch the switch for the second time: the white indicator light flashes twice,
reach out to sense, and the foaming time is about 1 s.
3. Touch the switch for the third time: the red-light flashes twice and the product is
turned off.
4. Low battery mode: The red-light flashes for 3 seconds and then move into
working mode.
5. No battery mode: the red-light flashes for 3 seconds but will not move into
working mode.
6. Warming mode: the alarm will go off if hands are placed near the sensor for a
long time. Place hands away from the sensor and then back again to resume the
machine.
Precautions
1. It is recommended to use the original hand sanitizer with this product.
2. It is recommended to use the qualified 4 double A alkaline batteries.
3. Do not use non-foaming hand sanitizer to avoid machine failure
4. Do not immerse the product in water or wash it directly with water to avoid short
circuit.
5. When installing or replacing hand sanitizer, do not tilt the bottle. If a small
amount of liquid flows out, i tis normal, it can still be used normally after wiping.
6. Store the product in a cool place away from direct sunlight or near heat sources.
7. Do not dump this product to prevent the hand sanitizer from entering the
damaged parts inside the machine.
8. If you need to clean it, it is recommended to gently wipe the surface of the
machine with a wet towel when i tis turned off.
9. If the product is not used for a long time, please take out the dry battery to avoid
the battery from getting wet and leaking.
10. Please do not place your hands near the sensor too rapidly for many times or
stay there for a long time, as this will make the red-light flash and enter the
warning mode.
9
Q&A
Question 1: I can’t turn on the machine after installing the battery.
1. Check if the battery is wrongly installed. Please follow the correct instructions.
2. Check if the battery cover is tight.
Question 2: After using for a while, the touch does not respond.
1. Re-replace the dry battery
2. Check for signs of damping, which results in broken circuit.
Question 3: The touch function is normal, but it does not foam.
1. Check if the hand sanitizer is a foam hand sanitizer.
2. Check if the hand sanitizer has been used up.
Question 4: The indicator light is not lit
1. The product is not turned on
2. Battery is wrongly installed
Question 5: The red light continues to flash
1. Clean the infrared sensor window to clear stains/shades
2. Do not place hands near the sensor for too long
All rights reserved. © 2020 Alza.cz a.s.
Table des matières
