Alware STREAK 800 Manuel utilisateur
STREAK 800 HEXACOPTER
Instruction Manual
1
Contents
1. Introduction.........................................................................................................................................................3
2. Safety Notes........................................................................................................................................................5
3. Equipment Required For Assembly....................................................................................................................
4. Check List............................................................................................................................................................7
5. Soldering Job.....................................................................................................................................................10
.0 Assembly Steps - Quick Collapsible Illustration.............................................................................................11
.1 Assembly Steps - Flight direction indicator....................................................................................................13
.2 Assembly Steps – Motor..................................................................................................................................14
.3 Assembly Steps – Motor Mount .....................................................................................................................15
.4 Assembly Steps – Gimbal Mounting...............................................................................................................1
.5 Assembly Steps – ESC and ESC board...........................................................................................................18
. Assembly Steps – Motors & Propellers...........................................................................................................20
.7 Assembly Steps – Bipod Landing Gear...........................................................................................................22
.8 Assembly Steps –
Multicopter Controller Mounting Illustration.......................................................................................................24
8. Specification......................................................................................................................................................25
End Of Manual......................................................................................................................................................2
2
1. Introduction
Alware's Streak 800 Hexacopter is the next generation aircraft for professional aerial filming with
big Cameras, long flying time FP , search and rescue activities in the air with minimum budget.
Quick Collapsible Design:
Unlike other huge multicopters, Streak 800 has
an extremely convenient collapsible structure
design. Four arms can be folded together within
1 min without using any tools. This greatly
reduce the effort used in transportation.
User Friendly Design-Capable With Many
Gimbals:
Besides, Streak 800 has a user friendly design. It
comes with an high strength, large clearance
landing gear which is made of carbon fiber
booms and CNC metal mounts. It is capable with
many other common Gimbals in the current
market without any modification. Capable
Gimbals including Alware Pro 3 Camera Mount
Series, GAUI CRANE 3 and CRANE 2 Gimbals, STO
S-903(3-axis) Gimbal, STO Camera Mount Kit S-
550 etc. Now you can choose any Gimbal as you
like without limitation.
Innovatice Motor Mount:
With innovative design of the motor mounts,
speed controller could be put next to the motor
and far away from the main controller and
receiver. This minimizes the interference to the
radio signal to give safer and more stable flying.
At the same time, putting speed controllers
near the motors thus the props, it provides
better cooling effect to the controllers. This
highly increase the efficiency for flying.
Moreover, this benifit design give you the
maximum freedom to use any brands of ESC (for
6S Lipo, 40A or above) you like. (Recommended
ESC: HobbyWing FlyFun-40A ESC.)
3
Large Current Power/ESC Board:
Streak 800 comes with a large current
distribution board. The whole board as a
conductor, it support up to 100A input which is a
lot more enough for Steak 800. It distributes a
power imput to six speed controllers within the
board in a clear way. This does not produce
magnetic thus less influence to sensors.
High Efficient APC Propellers:
Streak 800 comes with 3 pairs of Genuine APC
Composite 14x4.7 Propellers. APC Propellers are
the most carefully and accurately molded in the
USA. The blade shapes are rated as the most
efficient and silent manufactured in the aircraft
models.
High Performance Brushless Motors:
Motor is the heart of a machine. Alware
Brushless Motor 3515-15 K 400 is designed
mainly for heavy Multicopters. It has high
performance, high efficiency, less vibration and
smooth turning. Every motor will be
accomplished by an professional dynamic
balance process to keep the quality in high
standard.
Easy Assembly Steps:
Every Streak 800 Kit will be installed(90% complete) by well-trained technicians and checked
carefully before shipping. You will need only to put the electronic controllers to the body when
you got the Kit. Clear instruction manual could be downloaded easily online.
4
2. Safety Notes
Do fly only in safe areas and always away from other people! Do not operate RC aircraft within the
vicinity of homes or crowds of people. RC machine are prone to accidents, failures, and crashes
due to a variety of reasons including pilot error, radio interference, and lack of maintenance. Pilot
are responsible for their actions and damage or injury occuring during the operation of RC aircraft
machine.
When flying the aicraft, the fast rotating props of Streak 800 may cause serious injuries with any
accident occurred. Therefore please keep in mind that safety at first during the flight.
The ONLY Flying direction suitable for Streak 800:
Make sure you have installed your own Hexacopter Controller and the Props in the correct direction
according to the factory's manual of the Controller.
5
3. Equipment Required For Assembly
6pcs-- 40A ESC(6S
22.2 ) (e.g. HobbyWing
FlyFun 40A ESC)
18pcs-- 3.5mm Bullet
Connector (Female) for
6pcs ESC
1pcs-- “+” Mode
Hexacopter Controller
2pcs-- 6S LiPo Battery
4500-7500mAh 22.2
( Will be connect in
Parallel)
2pair-- Connectors For
Batteries and Power
Board
1pcs-- Transmitter 1pcs-- Receiver 1pcs-- Lipo Charger &
the connector to fit the
Lipo Battery.
4. heck List
Please Check the Follo parts.
Alware Multicopter Brushless Motor
3515-15 K 400 (ALS800KIT not include.)
6 Pack
Screw set come with Motor.
6 Set
Apc Propeller 14x4.7SFP (CW)
3 Pcs
Apc Propeller 14x4.7SFP (CCW)
3 Pcs
Large Current Po er/ESC Board ith
2 pairs Battery Cable.
Servo Extension Wire ( 15cm )
6 pcs
7
AWG wire Black ( 33cm )
6 pcs
AWG wire Red ( 33cm )
6 pcs
Frame parts.
Motor Mount
6 Pcs
Carbon Fiber Leading Gear Assembly
2 Pcs
Landing Gear Skid (420 mm)
2 Pcs
System Platform Protection Frame
1 Pcs
8
Other parts :
4pcs x Hex Cap Screw M3x8mm 16pcs x Round Cap Screw
M3x6mm
4pcs x Hex Cap Screw M3x16mm
24pcs x 3mm Washers 8pcs x Nylon Washer 3x7x6mm 8pcs x Battery Support Damper
1pcs x Direction Indicating
Sticker
9
5. Soldering Job
Solder 2 pairs Battery Cable to the Large Current
Power/ESC Board and connect the other end to the
Battery Connectors. (Red = +ve , Black = -ve) Do not
short circuit two polarities!
1.) Solder Black and Red AWG wires to the ESC.
2.)Solder 3pcs 3.5mm Bullet Connectors (Female) to
the ESC.
3.)Connect Servo Extension Wire to the Signal
Connector of ESC and secure it using Adhesive Tape.
Solder the AWG wires (which is connected to the
ESC) to the Large Current Power/ESC Board after
installed to the Motor Mount
(Please refer to page 19 ).
10
Table des matières
Autres manuels Alware Jouet
