Alphacom a200 Manuel utilisateur
1
Alphacom a200
a RANGE tElEPHONE
USER GUIDE
Versatility & Value
®
1
CONTENTS Page
1. GUARANTEE 2
2. CONDITIONS OF USE 2
3. FACILITIES AND FEATURES 3
4. LOCATIONS OF CONTROLS - FRONT VIEW 4
5. LOCATIONS OF CONTROLS - SIDE VIEW 5
6. HEADSET HOOK ASSEMBLY - (optional) 6
7. UTILISATION OF CONTROLS 7
8. INSTALLATION 8
9. SETTING THE DIALLING AND RECALL MODE 8
9.1 THE DIAL MODE SELECTOR SWITCH 8
9.2 THE RECALL MODE SELECTOR SWITCH 9
9.3 THE MESSAGE WAITING SELECTOR SWITCH 9
9.4 SETTING THE RINGER - RINGER VOLUME SLIDE CONTROL 9
9.5 CONNECTING TO TELEPHONE SOCKET 9
10. OPERATING PROCEDURES 10
10.1 LAST NUMBER REDIAL 10
10.2 MEMORY OPERATION 10
10.3 DIALLING NUMBERS FROM MEMORY 10
10.4 PAUSE 10
10.5 TONE BUTTON 11
10.6 HANDSET MUTE BUTTON 11
10.7 LATCHABLE BASE MUTE 11
11. OPERATING PROCEDURE FOR PBX CONNECTION 11
11.1 PBX RECALL 11
11.2 GENERAL USE 11
12. IN CASE OF DIFFICULTY 12
13. CARE OF YOUR a200 HEADSETPHONE 12
14. WALL MOUNTING 13
2
1. GUARANTEE
Your a200 Telephone is guaranteed from the date of purchase.
If found to be faulty within the guarantee period it will be repaired or replaced at our
discretion, subject to our standard terms and conditions. The guarantee does not
cover accidental damage or negligence. The telephone must only be used in the U.K.
in accordance with its instructions for use and must not be tampered with, or taken
apart by anyone who is not an authorised representative of the company. The
guarantee in no way limits your legal rights. Should you have any problems, please
return your telephone to your supplier.
Please ensure that a note of your name and address and details of the problems are
enclosed, together with a copy of your purchase invoice, and that goods are returned
in their full original packaging with instructions enclosed. Goods are returned to the
manufacturer at the customers own risk and expense.
2. CONDITIONS OF USE
Your a200 Telephone is approved for use on business or private direct exchange lines
and on compatible PBX extensions.
When connected to a direct exchange line this must be a standard exclusive (not
shared service) line. The line should cater for either loop disconnect or multifrequency
signalling. The telephone can signal Timed Break and Earth Recall.
This telephone is not suitable for use as an extension to a payphone or on shared
service or ( 1+1 ) carrier systems.
The dialling code ‘999’ can be dialled on this apparatus for the purposes of making
outgoing calls to the BT Emergency (999) Service.
3
3. Facilities and Features
This apparatus has been approved for the use of the following facilities
- Simple telephone facility
- Loop Disconnect or DTMF Signalling (selectable)
- 32 digit Automatic Storage of last number dialled
- 20 Direct Memory locations of 24 digit capacity
- Ringer Volume control
- Ringer Pitch control
- Time Break or Earth Loop Recall (selectable)
- Operation in absence of proceed indication
- Suitable for PABX’s providing secondary proceed indication
- Push-to-Mute function or optional Push-to-Speak
- Message waiting (6 wire line cord required for 6 wire systems not supplied)
- Memory Protection Switch
Any other usage will invalidate the approval of the apparatus if as a result it then ceases
to conform to the standards against which approval was gained.
4
4. a200 Telephone - Front View
4
4. a200 Telephone - Front View
a200 User Guide.indd 4 8/3/11 12:23:46
5
5. a200 Telephone - Side View
6
6. Headset Hook Assembly (Optional)
Hi Elevation
Position the Headset Hook in the required elevation (Hi or Lo) then slide the cover on to
secure in place.
Lo Elevation
7
7. Utilisation of Controls
The button functions are as follows:
0 - 9 - Dialing digits.
* - # - Dialling codes for MF signalling
Recall - For use on PBX or for star services
LNR - Last number redial function
Tone - Switches from Loop Disconnect to DTMF during dialling
Pause - Insert a pause in the dial sequence
Mute - To prevent the other party from hearing you (ie. push (on
handset) down to mute) or, alternatively, on specially adapted
models this can be amended to push-to-speak. In this
instance, the phone will be clearly marked as such.
Latchable Mute - To prevent the other party from hearing you (i.e. push
(on base) to (on base) mute). LED will illuminate when in use. Push
button again to continue normal (two-way) conversation.
Headset - To enable headset operation, LED will illuminate when in use.
The switch functions are as follows:
Ring Vol - Allows you to set the level of the ringer loudness
Ring Pitch - Allows you to set the pitch of the ringer
ELR/TBR - Sets the Recall to Earth (ELR) or Timed Break (TBR) Recall
Tone / Pulse Dialling - Tone or Pulse dialling selector switch
Memory Protection - Allows you to protect numbers stored in memory location
Message Waiting
- Set the message waiting to 4 or 6 line conguration
Visual Indicators: Ring - This indicates an incoming call by lighting up.
Message Waiting - Operates where PABX message waiting is operational
8
8. Installation
Your a200 Telephone is designed to be plugged into the new phone sockets adopted
in the U.K. If you do not have a primary socket you can obtain this from your BT sales
ofce, whose address is in the telephone directory. Additional sockets can be tted by
yourself using one of the extension kits commercially available. For additional sockets
required on a PBX you should contact your PBX supplier/maintainer. The plug and
socket are designed so that the plug will only t the socket the correct way round.
Please note any other method of connection will invalidate the instrument approval.
On any exchange line you may have as many sockets as you like, the number of which
may exceed the number of telephones. Your telephone can be moved from socket to
socket by simply plugging it in where you wish. However, if you unplug your telephone
whilst involved in initiating a call or talking, the call may be lost.
There is a limit on how many telephones may be connected to an exchange line at any
one time. Plugging in too many telephones will overload your exchange line and as a
result your telephones may not ring. To enable you to check if you are overloading a line,
a Ringer Equivalence Number (REN) is marked on the base of the telephones you wish
to plug in. The ringers should operate satisfactorily if the sum of the REN numbers are 4
or less.Include all BT equipment provided. If a BT telephone is supplied unmarked you
can assume it to have a REN of 1, but this should be conrmed by your local BT sales
ofce.
NOTE: NOT ALL TELEPHONES HAVE THE SAME REN VALUE.
This a200 Telephone has a REN of 1.
Once you have completed the “Initial Set-up Procedure” ( Section 4) then plug your
telephone into the socket. Once plugged in wait for 4 seconds before making or
answering a call.
Your a200 Telephone is now ready for use.
9. Setting the Dialling and Recall Mode
9.1 THE DIAL MODE SELECTOR SWITCH
Many telephone exchanges in the UK still use the PULSE dialling system. However, as
new exchanges are commissioned and older exchanges are updated, the dialling system
is being changed to TONE dialling which gives faster connection as well as access to
new services.
Your a200 Telephone allows you to operate on either system and the DIAL MODE
SELECTOR SWITCH should be set to the dialling mode required by your exchanges. Set
the switch to the PULSE (Loop Disconnect) position for PULSE dialling, or to the TONE
(Multi Frequency) position for TONE dialling. If in doubt about the correct dialling mode
used by your exchange, please consult your Network Operator.
9
9.2 THE RECALL MODE SELECTOR SWITCH
If you are connected to a TONE dialling exchange, set the switch to the TBR (Timed
Break Recall) position to enable you access certain Network Services.
If you are connected to a PULSE dialling exchange, set the switch to the ELR (Earth
Loop) position as recall has no function on direct lines connected to such exchanges.
(This will avoid the possibility of cutting off your call should the recall button be pressed
accidentally.)
If you are connected to a PABX, set the switch according to the requirements of your
particular PABX. If in doubt, consult your PABX Instructions or your PABX maintainer.
9.3 THE MESSAGE WAITING SELECTOR SWITCH
On 4 wire systems set the switch to 2/5 to enable message waiting on compatible
systems. For 6 wire systems set the switches to 1/6. Only one message waiting
telephone may be connected to an extension. If more than one message waiting
telephone is connected to a line, the system may interpret this as an off hook condition.
9.4 SETTING THE RINGER - RINGER VOLUME SLIDE CONTROL
The ringer volume control allows the ringer volume to be varied whilst still allowing you to
make calls. Set to minimum position the ringer will be off. RINGER PITCH SWITCH - Set
the switch to the HI, MED or LO position to adjust the pitch of the ringer.
9.5 CONNECTING TO TELEPHONE SOCKET
When the setting up instructions have been completed, connect the plug at the end of
the telephone lead into the telephone socket. The plug will only t the correct way round.
Table des matières
Autres manuels Alphacom Téléphone
