ALMAC BiBi 1090-BL Light Guide de configuration
BiBi 1090-BL Light
Translation of original instructions
Prior to commissioning the machine read carefully this Use and
Maintenance Manual
Note: table of contents at the end of the manual
Edition Date
00 15/03/2017
PAGE 2 ALMAC s.r.l.
1 GENERAL INFORMATION
1.1 Documents supplied with each machine
CE Declaration of conformity
Instruction Manual (this manual)
Spare Parts Manual
Wiring diagrams and hydraulic layouts
Report register
1.2 Details of Manual
Instruction manual for Elevating work platform
Version: BIBI 1090-BL LIGHT
Note: Some of the photos and illustrations may not refer specifically to the
version of the machine in your possession, but provide indications concerning
the purpose for which they have been included.
RECIPIENTS OF THIS MANUAL
User
Maintenance technician
Warning: the servicing personnel must be properly trained and experienced.
CAREFULLY READ this manual before performing any operation on the machine.
If in doubt, do not improvise. Call the assistance service.
PAGE 3 ALMAC s.r.l.
1.3 Ownership of the information
This document contains confidential information. All rights reserved.
This manual may be neither partially nor totally duplicated without the prior
written authorization of ALMAC s.r.l.
This document may only be used by the customer to whom the manual has been
supplied along with the machine, and only for the purpose of use and
maintenance of the machine to which the manual refers.
ALMAC s.r.l. hereby declares that the information in this manual was congruent
with the technical and safety specifications of the machine to which the manual
refers. The manufacturer declines all liability for direct or indirect damage to
persons, things or animals deriving from use of the machine in conditions
differing from those envisaged.
ALMAC s.r.l. reserves the right to make changes or improvements, without prior
notice, to the documentary material and to the machines, including marketed
machines of the same model as that to which this manual refers but with a
different serial number.
The information contained in this manual refers in particular to the machines
specified in "Identification data of the M.E.W.P." and related documentation.
1.4 Manufacturer's identification data
PAGE 4 ALMAC s.r.l.
1.5 MEWP identification data
The machine named BIBI 1090‐BL LIGHT is defined according to the technical
standards in force (ref. UNI EN 280:2015), as:
Mobile Elevating Work Platform (MEWP), belonging to group B, type 3 (point
1.4-EN 280)
Meanings:
GROUP B: All types of mobile elevating work platforms other than "Group‐A"
(mobile elevating work platforms where the vertical projection of
the centre of the platform area in all platform configurations at
the maximum frame inclination specified by the manufacturer is
always inside the tipping lines).
TYPE 3: mobile elevating work platforms where travelling with a raised
work platform is controlled from a point of control on the work
platform.
PAGE 5 ALMAC s.r.l.
Sede Legale Viale Ruggeri, 6/A - 42016 - Guastalla (RE) Italy
info@almac-italia.com - www.almac-italia.com
Identification plate
Refer to the data on the identification plate for an exact identification of the
MEWP.
WEWP
2017
ALM-000
8.7
PAGE 6 ALMAC s.r.l.
1.6 Performance
Below are the configurations that the mobile elevating work platform can have
during operation and transport.
1750
2080
E F2F1
C2
D4
C1
D2
A1
C3
B
D5
D6 D3
A2
A3
A4
D1
Dismantle only for special transport situations; before commissioning, the
machine must be reconfigured by skilled and authorised personnel,
according to the certified diagram, following the manufacturer's
instructions
PAGE 7 ALMAC s.r.l.
G2
G1
G3 G4
L1
H3 H4
H1 H2
PAGE 8 ALMAC s.r.l.
Characteristic dimensions
Machine length
With work platform retracted A1 mt 2.18
Machine length
With work platform extended A2 mt 3.25
Length of work platform
With work platform retracted A3 mt 1.80
Length of work platform
With work platform extended A4 mt 2.92
Maximum width
Widened track C1 mt 1.64
Maximum width
Narrow track C2 mt 1.46
Height of crawler B mm 360
Width of crawler C3 mm 250
Min height of floor surface
Widened track D1 mt 1.45
Minimum height
Widened track D2 mt 2.61
Min height of floor surface
Narrow track D3 mt 1.77
Minimum height
Narrow track D4 mt 2.94
Minimum height (transport only)
Widened track / railings closed D5 mt 2.09
Minimum height (transport only)
Narrow track / railings closed D6 mt 2.42
Width of work platform E mt 1.3
Distance between the crawler and the edge of
the work platform in width
Narrow track
F1 mm 80
Distance between the crawler and the edge of
the work platform in width
Widened track
F2 mm 170
Maximum work height G1 mt 10.0
Min height of floor surface G2 mt 8.0
Maximum work space in width G3 mt 2.23
Maximum work space in length G4 mt 3.9
Useful work distance in width H1 mm 390
Useful work distance in width H2 mm 390
PAGE 9 ALMAC s.r.l.
Useful work distance in length H3 mm 170
Useful work distance in length H4 mm 1540
Extension of work platform L1 mt 1.12
Technical data
Capacity of work platform kg 300
Number of operators on work platform 2
Lifting time (with 300Kg on the platform) s 45
Lowering time s 40
Hydraulic side‐shift pressure bar 210
Hydraulic lifting pressure Bar 160
Oil tank capacity l 50
Climb angle ° 25
Maximum side slope of the terrain ° 14
Maximum longitudinal slope of the terrain ° 20 / 15
Maximum travelling speed km/h 2.4
Maximum speed with platform lifted km/h 0.4
Overall weight kg 2850
Max wind force m/s 12.5
Starter battery voltage and capacity V/Ah 12/50
Weight of starter battery kg 15
Sound power LwA dBA 104
Sound level at operator position Lp (indoor industrial environment) dBA 84.5 ± 2.6
Sound level at operator position Lp (outdoor environment on
asphalt) dBA 79.5 ± 2.6
Max peak level Lp peak dBC 106.0
Vibrations transmitted to hand / arm system (operator hand
rest) m/s2 < 2.5
Whole‐body vibration (platform‐measured on flat terrain) m/s2 0.52 ± 0.10 *
Vibrations transmitted to hand / arm system (operator hand
rest) m/s2 0.59 ± 0.12 **
* values referred to raised platform (operating height)
*** values referred to platform at the transport height limit
PAGE 10 ALMAC s.r.l.
Maximum transport height allowed
(manual levelling and the adjustment of the travel speed is allowed)
Autres manuels ALMAC Nacelle élévatrice à flèche
Manuels Nacelle élévatrice à flèche populaires d'autres marques
LGMG
LGMG T65JE Manuel utilisateur
Genie
Genie Z-135/70 Manuel utilisateur
Oshkosh Corporation
Oshkosh Corporation JLG H800AJ Manuel d'utilisation et d'entretien
Oshkosh
Oshkosh JLG 1500SJ Guide d'installation et d'utilisation
Skyjack
Skyjack SJ30AJE Manuel utilisateur
Oshkosh
Oshkosh JLG 800A Guide d'installation et d'utilisation
Terex
Terex Genie Z-135/70 Manuel utilisateur
Skyjack
Skyjack SJ 46AJ Manuel utilisateur
Molift
Molift Quick Raiser 205 Manuel utilisateur
Snorkel
Snorkel SL26RTE Guide de démarrage rapide
Terex
Terex Genie Z-135/70 Manuel d'installation et d'exploitation
Terex
Terex Genie ZX-135/70 Manuel d'installation et d'exploitation