AllSee Technologies TL H7 Series Manuel utilisateur
Multimedia
Control System -
TLxxH7 - Guide
Revision date: 21/08/2019
Step 1
In order to set up the screens correctly, the screen’s settings will need to be changed.
The ‘video wall set’ on the screen’s settings will need to be changed to match each screen in order for
the screens to connect to each other correctly. To do this, please follow the steps below;
Press ‘Menu’ on the remote while pointing at the IR sensor under the screen.
Once the settings menu pops up to use the remote and navigate to “Video wall set” as the image
shows below.
A new option will show up. Follow the setting’s on the image below, the main screen will have the
‘Currently Vaddr: 1’ as this is screen one and ‘total vaddr: 3’ as there are 3 screen’s set in total. If you
have 5, this option would be 5.
Screen two will have the same setting’s as the image shows below. The ‘Current Vaddr’ will be set as ‘2’
as this is screen two. Screen 3 will have the ‘Current vaddr’ set as ‘3’ but everything else will be the
same as the previous screen’s settings.
Step 2
(Note: Before preparing the cables, have a ‘main’ screen that will be the screen that is
connected to the PC and will take control of the other screens.)
Once the screens are set up, use the RS232 cable provided to connect with the PC to your chosen
‘main’ screen. This RS232 cable needs to be connected to the ‘RS232 in’ slot. This will not work if this
cable is connected to the RS232 out.
The RS232 Cable provided to be
able to connect to the computer;s
multimedia software will be
inserted into the ‘RS232 in’ Slot
The RS232 cable inserted into the ‘RS232
In’ slot.
Use the cable provided (VGA to USB) to
connect to the RS232 cable will need to
be inserted into an empty USB slot,
exactly like the picture shows.
Step 3
Once step 2 is completed, start setting up the other RS232 cables provided, these cables will be
connected to each screen in a certain pattern, with one screen connecting from ‘RS232 out’ to ‘RS232 in’
on the second screen. The pattern is shown on the images below. For this guide, I will be using 3 TLxxH7
screen’s and controlling them using the main screen.
This RS232 cable is
connected into the ‘RS232
OUT’ input, and this cable will
be connected to the second
screen shown on the image
below.
This RS232 cable is
connected to the PC, as
previously stated in Step 2.
The RS232 cable is then
connected to the second
screen in the ‘RS232 in’
input.
The third RS232 cable
provided will be
connected to the ‘RS232
OUT’ input, and this cable
will be connecting to the
‘RS232 in’ connection on
the third screen.
The Third RS232 cable is
connected into the ‘RS232 IN’
input on the screen. This
completes the daisy chain and
connects all the screen’s
together, ready for the
multimedia software.
Step 4
Open the ScreenControl software in the ‘control software en’ which was previously extracted at the start
of the guide.
Once opened, click on ‘Set (S)’ in the top left corner and click on ‘Com Setting ( C )’ This will bring
you up to a new setting’s menu which we will need to change.
Change all the ‘Com select’ to ‘COM4’. This isn’t a necessary step but it will help the screens connect
to each other.
Once completed, click on ‘Sure’ and you’re set to connect the screen’s together. Click on ‘Open connect’
and this should connect the screens to the software.
Ce manuel convient aux modèles suivants
2
Autres manuels AllSee Technologies Moniteur
AllSee Technologies
AllSee Technologies PCAP Multi Touch Screen Display Manuel utilisateur
AllSee Technologies
AllSee Technologies P2-B Manuel utilisateur
AllSee Technologies
AllSee Technologies DV-LED Manuel utilisateur
AllSee Technologies
AllSee Technologies FR8A Manuel utilisateur
AllSee Technologies
AllSee Technologies PF46HD-B Manuel utilisateur
AllSee Technologies
AllSee Technologies 32" High Definition Digital Advertising... Manuel utilisateur
AllSee Technologies
AllSee Technologies Slimline Manuel utilisateur
