Page
3ALLPRO Imaging
12 SE
ScanX has been designed to minimize exposure of personnel to hazards. While the equipment is designed for
safe operation, certain precautions must be observed. Use of ScanX not in conformance with the instructions
specified in this manual may result in permanent failure of the unit.
General.
• Check with your dealer for packing material requirements if it is necessary to return the product to
the manufacturer. Correct packing guarantees optimal safety of the device during transport. Should it
become necessary to return the device to the manufacturer during the warranty period or other times,
the manufacturer will not accept claims for damage arising from using incorrect packing materials.
• Before every use, the operator must check the functional safety and the condition of the device.
• The operator must be knowledgeable in the operation of the device.
Use of Accessory Equipment.
The use of ACCESSORY equipment not complying with the equivalent safety requirements of this
equipment may lead to a reduced level of safety of the resulting system.
Use of ACCESSORIES or cables other than those specified or provided by the manufacturer may result
in increased EMISSIONS or decreased IMMUNITY of the EQUIPMENT.
Do Not Attempt Internal Service.
The interior of each component of ScanX is only accessible by removing hardware with special tools
and should only be opened and serviced by an authorized dealer service technician.
Contact your local Air Techniques authorized dealer for service. Failure to heed this directive may result in
equipment damage and voids the warranty.
Electrical Safety Notes.
The power line cord is the mains power disconnect device.
Use only the line cord and power supply provided with the unit.
Use only grounded electrical connections.
To avoid risk of electric shock, fire, short-circuit or dangerous emissions, never insert
any metallic object into the equipment.
Only use connection cable(s) delivered with the device.
Check the device cables for possible damage before switching on. Damaged cables, plugs
and sockets must be replaced before use.
Never touch open supply outlets and patients simultaneously.
Do not locate unit where it could be sprayed with water, or in a damp environment.
GENERAL SAFETY
This document is a guide to the proper use of ScanX. It provides the information necessary for the setup,
operation and routine care and maintenance of the device. Review and follow the guidelines included in
this Instruction Manual to ensure that your ScanX gives you the highest level of performance.
This manual is not to be used as a replacement for training in radiography.
For information regarding the computer system and imaging software, refer to the appropriate
documentation provided with your computer hardware and software.
PURPOSE OF THIS MANUAL
