Allnet ALL2213 Manuel utilisateur
ALL2213
H.264 Outdoor IR WLAN P2P IP-Camera
User´s Manual
for other Browsers
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
1
Statement
Thank you for using our IP camera products. The IP camera designed for network video surveillance, adopted high
performance and powerful single SOC chip media processor to integrate audio and video capture, compression and
transmission. Standard H. 64 Main Profile coding algorithm ensures clearer and smoother video transmission effect.
Built-in Web Server allows users to easily perform real-time monitoring and remote control over front-end cameras via
Safari,Chrome,Firefox etc browser.
The IP cameras is suitable for small and medium-sized enterprises, families, and other environments that require remote
network video transmission and monitoring. It is easy to be installed and operated.
Before installation, please check the product and all accessories. If anything is missing, please contact your supplier in
time.
Package Contents:
1 IP Camera X1
Power Adapter X1
3 CD X1
4 User Manual X1
5 WIFI Antenna X1
6 Bracket X1
7 Network Cable X1
NOTE:
Contents in this manual may be different from the edition that you are using. Should any unsolved problem occur given
that the product is used according to this manual, please contact our technical support department or your product
suppliers.
The content of this manual may be updated at irregular intervals without prior notice.
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
2
1. INTRODUCTION
1.1. General Description
This is a minitype camera with elegant and beautiful shape, built-in Web server, open application interface and
industrial grade stable performance, makes the industrial network transmission safety, quickly, simple operation, easy
control. It integrates audio and image information, perform real-time monitoring synchronously through the network, to
achieve real-time monitoring audio and image via a standard Web browser.
1.2. Characteristic
Easy to Install
Just inserting the network cable to the RJ45 interface of the camera, inputting the camera’s IP address through
Microsoft IE, Mozilla Firefox, Google Chrome or other standard browsers, then using it.
High Quality Image
The camera adopt H. 64 video compression, with clear picture, the maximum speed up to 30 frames/second via
10M/100M network real-time transfer.
Open Standard Environment
Support TCP/IP network, support HTTP DNS DHCP PPPoE SMTP FTP SSL TFTP NTP ARP/RARP NFS RTSP RTP
RTCP protocols and Dynamic IP(DDNS). Support up to 10 users online simultaneously.
Advanced E tended Function
Connect home appliances and pan alarm via GPIO interface to achieve I/O alarm input and output functions.
Simple Management Mode
Using standard web browser, to configure and manage the camera, upgrade the software online directly.
Safety Performance Guarantee
Multi-level users management and passwords definition, the administrator can set different access permission to
different level visitors.
E tensive Range Application
Real-time video is transferred by internet, which can’t be compared by traditional video surveillance system. Users can
view and remote control the real time image at anytime, anywhere via network. The camera can be widely used such as
product demonstrations, real-time monitoring, real-time recording and taking. It can also be at the scheduled time or
event occurs, send pictures to the specified E-Mail, FTP server timely.
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
3
1.3. pecification
pecification:
ALL2213:
Image ensor
Ima e Sensor
1/4" Color CMOS Sensor
Display Resolution
1280*720(1.0Me a Pixels)
Illumination
0 Lux(with IR LED on)
Lens
Lens Type
F:6mm
Viewin An le
60
De ree
Video
Ima e Compression
H.264
Resolution
1280 x 720(720P), 640 x 480(VGA), 320 x 240(QVGA)
Flip Mirror Ima es
Vertical / Horizontal
Li ht Frequency
50Hz, 60Hz or outdoor
Video Parameters
Bri htness, Saturation , Contrast ,Hue
Communication
Ethernet Interface
Build in 10/100Mbps,Auto MDI/MDIX , RJ-45
Supported Protocol
TCP/IP HTTP DNS DHCP PPPoE SMTP FTP SSL TFTP NTP
ARP/RARP NFS RTSP RTP RTCP.
Compress rate level
128Kbps～4Mbps
Wireless Standard IEEE 802.11b/ /n
Data Rate 802.11b: 11Mbps (Max.), 802.11 : 54Mbps (Max.),
802.11n: 150Mbps (Max.)
Wireless Security WEP & WPA WPA2 Encryption
Physical
Infrared Li ht
30 IR LEDs, Ni ht visibility up to 25 meters
Alarm Input 1 Channel on/off Input
Alarm Output 1 Channel relay Output
Power
Power Supply
DC 12V/2.0A (EU adapter)
Power Consumption
9 Watts (Max.)
Environment
Operate Temper.
-20° ~ 55°C (-4°F ~ 131°F)
Operatin Humidity 20% ~ 85% non-condensin
Stora e Temper.
-20°C ~ 60° (-4°F ~ 140°F)
Stora e Humidity
0% ~ 90% non-condensin
O upport
PC
Windows,MAC
Browser
IE/Firefox/Safari/Goo le chrome or other standard browsers
Phone
iOS,Android
Certification
CE, FCC, RoHS
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
4
2. IN TALLATION AND ETTING
System Requirement
:
Operating System: Windows 000 / XP / Vista / 7/8
Network Protocol: TCP/IP
Network Structure: Applies to all network connections 10/100M LAN platform
2.1. Network Connection
Intranet and E tranet Connection Reference:
Extranet means public IP, Intranet means private IP. If your IP belongs to the follow range, then it’s a private IP :
Category A: 10.0.0.0 - 10. 55. 55. 55
Category B: 17 .16.0.0 - 17 .31. 55. 55
Category C: 19 .168.0.0 - 19 .168. 55. 55
Intranet Connection: IP camera and user’s computer(device) should be under the same network environment, and both
of their IP should be under the same subnet, then means correct connection, picture as below:
Figure1.0
E tranet Connection: there are ways as below:
(1). IP camera connect to the Internet via router, here camera’s IP is a private IP, clients need to connect to IP camera
through a router, with forwarding rule to be connected correctly, as below:
Figure1.1
( ). IP camera connect to the Internet directly, if it’s a fixed IP which provided by ISP, just input it. If it’s a floating IP,
then input the account and password which provided by ISP to dial-up connection.
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
5
Figure1.
2.2. UPnP ervice
UPnP could help you to find your camera’s IP more faster. For Window XP, from “Control Panel” > “Add or remove
applications” > “Add or remove Windows component” > “Network service” > “Detailed data” > “UPnP users
interface”, enable it, factory settings is disable. Then it can allow your operating system to support UPnP.
2.3. Login the Camera
Step 1: Install from CD into computer,then generate a icon
Step : Double click “Search IPCam”, camera IP & MAC list will be displayed. If you want to re-search, click
“Refresh” again.
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
6
Step 3: Double click the IP to enter other browsers login interface.
Figure1.3
3. OFTWARE OPERATION (FOR CHROME
FIREFOX AFARI)
Choose the suitable language, input correct user name and password, then click “Login”
For example,if the factory default settings as below:
IP Address:19 .168.1.155
User name: admin Password: admin
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
7
：Choose the login mode.
QuickTime:Choose QuickTime, login the camera directly.if there is prompt for installing the quicktime player, just
download and install it..
VLC: If use VLC, should download the VLC player firstly.
During the VLC installation, please must enable Mozilla plugin as the picture showes below:
：Choose languages here
：For mobile phone login
：Click to login the other browsers interface as below:
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
8
3.1. Two main functions
:
Live video: Click it, back to live video window from “Playback” or “Params settings”
Params Settings：
：：
：Setting the camera’s parameters(Details see 4 Params settings)
3.2. For Live Video
3.2.1 TOP Menu For QuickTime Mode:
Capture: Clik to take snapshot, the picture be saved in the PC to it’s appointed path as JPG format, will pop-up
the snapshot, right click the picture to save it.
OSD Settings: Click it will pop-up the OSD settings interface, including OSD Color, Frequency, Image Mirror
and Flip.
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
9
OSD: Means “On-Screen Display”
OSD Color: Including Disabled, Black, Red, Green, Blue, Purple, Gray, Silver, Yellow, Olive, Turquoise, White, Light
Blue etc.
Frequency: Including 50HZ, 60HZ, Outdoor.
50HZ/60HZ for the users who use 50HZ/60HZ frequency, outdoor for the users who want to use this camera to monitor
the outdoor environment
NOTE: This camera normally should be used in a indoor environment
Mirror and Flip
Mirror: Select this icon to see the mirror image. Erase it, will back to normal.
Flip: Select this icon to see the reversal image. Erase it, will back to normal.
Table des matières
Autres manuels Allnet Caméra IP
Allnet
Allnet ALL2272 Manuel utilisateur
Allnet
Allnet ALL-CAM2399-EP Manuel utilisateur
Allnet
Allnet ALL2298 Manuel utilisateur
Allnet
Allnet ALL-CAM2372-WP Manuel utilisateur
Allnet
Allnet ALL2272 Manuel utilisateur
Allnet
Allnet ALL2205 Manuel utilisateur
Allnet
Allnet ALL2295 Manuel utilisateur
Allnet
Allnet ALL2285 Manuel utilisateur
Allnet
Allnet ALL2212 Manuel utilisateur
Allnet
Allnet ALL2205 Manuel utilisateur
