Allied Vision Technologies Prosilica GC1380 Manuel utilisateur

GC1380 / GC1380C

Allied Vision Technologies Canada Inc.

101-3750 North Fraser Way

Burnaby, BC

V5J 5E9 / Canada

Technical Manual

700018A

Updated August 26, 2010

GC1380 Technical Manual Page ii

Table of Contents

Table of Contents .......................................................................................................... ii

Introduction ............................................................................................................ 1

Precautions.............................................................................................................. 1

Warranty ................................................................................................................. 1

Specifications .......................................................................................................... 2

Supported Features ................................................................................................... 2

Mechanical .............................................................................................................. 4

Connections............................................................................................................. 5

Cleaning the Sensor................................................................................................... 9

Adjusting the C-mount ..............................................................................................10

Camera Installation ..................................................................................................11

System Optimization.................................................................................................16

Trouble Shooting .....................................................................................................18

Addendum..................................................................................................................21

GC IO Schematic.......................................................................................................22

Isolated Trigger Schematic.........................................................................................23

Non-isolated Trigger Schematic ..................................................................................24

Video Iris Schematic .................................................................................................25

Trigger Timing Diagram .............................................................................................26

Notes on Triggering ..................................................................................................27

GC1380 Technical Manual Page iii

Legal notice

For customers in the U.S.A.

(FCC Compliance Information)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. However there is no guarantee

that interferences will not occur in a particular installation. Operation of this equipment in a residential environment is likely to

cause harmful interference.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this

equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the

limits for a computing device pursuant to Subpart B of Part 15 of FCC Rules.

For customers in Canada

This digital apparatus complies with the Class A limits for radio noise emissions set out in the Radio Interference Regulations.

Pour utilisateurs au Canada

Cet appareil numérique est conforme aux normes classe A pour bruits radioélectriques, spécifiées dans le Règlement sur le

brouillage radioélectrique.

Life support applications

These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can

reasonably be expected to result in personal injury. Allied Vision Technologies customers using or selling these products for use in

such applications do so at their own risk and agree to fully indemnify Allied Vision Technologies for any damages resulting from

such improper use or sale.

Trademarks

Unless stated otherwise, all trademarks appearing in this document are the property of Allied Vision Technologies and are fully

protected by law.

Warranty

The information provided by Allied Vision Technologies is supplied without any guarantees or warranty whatsoever, be it specific or

implicit. Also excluded are all implicit warranties concerning the negotiability, the suitability for specific applications or the non-

breaking of laws and patents. Even if we assume that the information supplied to us is accurate, errors and inaccuracy may still

occur.

All text, pictures and graphics are protected by copyright and other laws protecting intellectual property. It is not permitted to copy

or modify them for trade use or transfer, nor may they be used on web sites.

Allied Vision Technologies Canada Inc. 1/2010

GC1380 Technical Manual Page iv

Contacting Allied Vision Technologies

• Technical information:

http://www.alliedvisiontec.com

• Support:

[email protected]

Allied Vision Technologies GmbH (Headquarters)

Taschenweg 2a

07646 Stadtroda, Germany

Tel.: +49.36428.677-0

Fax.: +49.36428.677-28

e-mail: [email protected]

Allied Vision Technologies Canada Inc.

101-3750 North Fraser Way

Burnaby, BC, V5J 5E9, Canada

Tel: +1 604-875-8855

Fax: +1 604-875-8856

e-mail: [email protected]

Allied Vision Technologies Inc.

38 Washington Street

Newburyport, MA 01950, USA

Toll Free number +1-877-USA-1394

Tel.: +1 978-225-2030

Fax: +1 978-225-2029

e-mail: [email protected]

GC1380 Technical Manual Page 1

Introduction

The GC1380 series of cameras are very sensitive, high performance, megapixel, Gigabit Ethernet

cameras based on the Sony ICX285AL and ICX285AQ CCD sensors.

Precautions

READ INSTALLATION GUIDE CAREFULLY.

This document contains specific information which is necessary for the correct operation and

treatment of this product.

DO NOT OPEN THE CAMERA. WARRANTY IS VOID IF CAMERA IS OPENED.

This camera contains sensitive components which can be damaged if handled incorrectly.

KEEP SHIPPING MATERIAL.

Poor packaging of this product can cause damage during shipping.

VERIFY ALL EXTERNAL CONNECTIONS.

Verify all external connections in terms of voltage levels, power requirements, voltage polarity,

and signal integrity prior to powering this device.

CLEANING.

This product can be damaged by some volatile cleaning agents. Avoid cleaning the image sensor

unless absolutely necessary. Please see instructions on sensor cleaning in this document.

DO NOT EXCEED ENVIRONMENTAL SPECIFICATIONS.

See environmental specifications limits in the Specifications section of this document.

Warranty

Allied Vision Technologies(AVT) provides a 2 year warranty which covers the replacement and

repair of all AVT parts which are found to be defective in the normal use of this product. AVT will

not warranty parts which have been damaged through the obvious misuse of this product.

GC1380 Technical Manual Page 2

Specifications

Sensor Type Sony ICX285AL CCD (ICX285AQ for color)

Sensor Shutter Type Progressive Interline

Image Resolution 1360 x 1024 pixels

Pixel Size 6.45μm x 6.45μm

Optical Forma

2/3 inch

Lens Moun

C-mount with adjustable back focus

Color Sensor Filter Pattern

†

Bayer

Full Resolution Frame Rate 20.2 fps

Frame Rate (640 x 480 ROI) 37 fps

I/O 1 isolated input/output, 1 non-isolated input/output,

1 RS-232 input/output

Power Requirements Less than 3.3W

††

(5V to 16V)

†††

Digitization 12 Bits

Trigger latency* 3.7us for non-isolated I/O, 5us for isolated I/O

Trigger Jitter* ±20ns for non-isolated I/O, ±0.5us for isolated I/O

Tpd* 10ns for non-isolated I/O, 1.3us for isolated I/O

Operating Temperature 0 to 50 Celsius***

Operating Humidity 20 to 80% non-condensing

Size 33mm (height) x 46mm (width) x 59mm (length)

Weigh

104g

Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX

Software Interface Standard GigE Vision Standard 1.0

Regulator

CE, FCC, RoHS

† Applies to GC1380C only.

†† Power consumption will increase with reduced ROI imaging and color interpolation.

††† Nominal operating voltage is 12V. Cameras have been tested at 12V.

* See Notes on Triggering in the Addendum.

***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GC CAMERAS, SPECIAL CARE IS REQUIRED TO

MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE CAMERA IS TO BE OPERATED IN A WARM

ENVIRONMENT, IT IS SUGGESTED THAT THE CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET

AND THAT THERE IS SUFFICIENT AIR FLOW.

GC1380 Technical Manual Page 3

Supported Features

Imaging Modes free-running, external trigger, fixed rate, software trigger

Fixed Rate Control 0.001 fps to maximum frame rate

External Trigger Delay 0 to 60 seconds in 1 microsecond increments

External Trigger Even

rising edge, falling edge, any edge, level high, level low

Exposure Time 10 microseconds to 60 seconds in 1 microsecond increments

Gain 0 to 27dB

Region of Interest (ROI) independent x and y control with 1 pixel resolution

Horizontal Binning 1 to 8 pixels

Vertical Binning 1 to full resolution of sensor

Pixel Formats Mono8, Mono16*, Bayer8, Bayer 16, RGB24,

YUV411, YUV422, YUV444,

BGR24, RGBA24, BGRA24

Sync Out Modes trigger ready, trigger input, exposing, readout, imaging, strobe, GPO

*On monochrome versions only.

GC1380 Technical Manual Page 4

Mechanical

Figure 1. GC SERIES mechanical dimensions.

GC1380 Technical Manual Page 5

Connections

Figure 2. GC SERIES connection diagram.

GC1380 Technical Manual Page 6

Item 1: GIGABIT ETHERNET PORT

This port conforms to the IEEE 802.3 1000BASE-T standard for Gigabit Ethernet over copper. It is

recommended that CAT5E or CAT6 compatible cabling and connectors be used for best

performance. Cable lengths up to 100m are supported.

Item 2: General Purpose I/O PORT

11 12

PIN FUNCTION

1Power Ground

212V Power

3Sync Input 1 - isolated

4Sync Output 1 - isolated

5Isolated Ground

6Video Iris

7 DNC

8RS-232 TXD

9RS-232 RXD

10 Signal Ground

11 Sync Input 2 – non-isolated

Figure 3. General Purpose I/O Pin out. Camera

rear view. 12 Sync Output 2 – non-isolated

The General Purpose I/O port uses a Hirose HR10A-10R-12PB connector on the camera side. The

mating cable connector is Hirose HR10A-10P-12S. This connector can be purchased from AVTor

from http://www.digikey.com.

See Addendum for more detail.

DO NOT EXCEED 5.5V ON SIGNAL INPUTS UNLESS OTHERWISE INDICATED. SYNC INPUT 1

CAN BE DRIVEN FROM A HIGHER VOLTAGE IF A CURRENT LIMITING RESISTOR IS USED TO

LIMIT THE CURRENT TO LESS THAN 10 MILLIAMPS.

12V Power and Power Ground

To operate the camera 12V Power with suitable current capacity (see specifications) must be

provided on Pin 2 and the Power Ground on Pin 1.

A cable assembly providing this power can be ordered from AVT (P/N 02-8003A for North America

or P/N 02-8004A for a Universal supply).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Allied Vision Technologies Caméra de sécurité

Allied Vision Technologies

Allied Vision Technologies AVT Marlin Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies GB660 Series Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Oscar Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies MANTA G-032B Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies AVT Oscar Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GS Series Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GB650 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GE4900 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies VT Prosilica GX3300 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies VT Prosilica GX1660 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies F-131C Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GT1290 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GC1600H Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies VT Prosilica GX1050 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies AVT Bonito Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GC650 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies F-201B AVT Dolphin Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies AVT Mako Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GE680 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies VT Prosilica GX1050 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GC1280 Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies GX1910C Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies AVT Prosilica GE Manuel utilisateur

Allied Vision Technologies

Allied Vision Technologies Prosilica GE1650 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur