Allen-Bradley Studio 5000 Logix Emulate Manuel du propriétaire

Programming Manual

Logix 5000 Controllers Produced and

Consumed Tags

1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix,

1769 Compact GuardLogix, 1789 SoftLogix, 5069 CompactLogix,

5069 Compact GuardLogix, Studio 5000 Logix Emulate

Important user information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this

equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and

wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried

out by suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or

application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements

associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the

examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described

in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

WARNING: Identifies information about practices or circumstances that can cause an explosion in

a hazardous environment, which may lead to personal injury or death, property damage, or

economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal

injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a

hazard, and recognize the consequence

Important: Identifies information that is critical for successful application and understanding of the product.

Labels may also be on or inside the equipment to provide specific precautions.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to

alert people that dangerous voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert

people that surfaces may reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control

center, to alert people to potential Arc Flash. Arc Flash will cause severe injury or death. Wear

proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work

practices and for Personal Protective Equipment (PPE).

Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation Publication 1756-PM011J-EN-P - February 2018 3

Summary of Changes

This manual includes new and updated information. Use these reference

tables to locate changed information.

Grammatical and editorial style changes are not included in this summary.

Global changes

This table identifies changes that apply to all information about a subject in

the manual and the reason for the change. For example, the addition of new

supported hardware, a software design change, or additional reference

material would result in changes to all of the topics that deal with that

subject.

Subject Reason

Updated screen shots

throughout.

The graphical user interface has been updated in

release 31 of the Logix Designer application.

Updated supported controllers. Logix Designer supports new 5069 Compact

GuardLogix controllers.

New or enhanced features

This table contains a list of topics changed in this version, the reason for the

change, and a link to the topic that contains the changed information.

Topic Name Reason

Additional Resources on page 7 Added controller user manuals as additional

resources

Controllers and networks that support

produced/consumed tags on page 12 Updated information on networks that support

produced and consumed tags

Considerations when migrating projects that contain

multicast produce tags on page 13 Added safety consumed tags on Compact

GuardLogix 5380 and GuardLogix 5580 controllers

considerations

Considerations when migrating projects that contain

multicast produce tags on page 13 Updated the versions of software for multicast

consumers running releases v18 and later

Organize tags for produced or consumed data on

page 14 Updated the controller projects to be verified to

include Compact GuardLogix 5380 and GuardLogix

5580 controllers

Create a produced tag on page 16 Renamed Produce a tag to Create a produce tag

Minor changes to the Create a produced tag

procedure

Create a consumed tag on page 18 Minor changes to the Create a consumed tag

procedure

Set RPI limits, default for producer tag on page 25 Updated the RPI limits and default procedure

Summary of Changes

4Rockwell Automation Publication 1756-PM011J-EN-P - February 2018

Consideration when migrating projects that contain

multicast produce tags on page 13

Organize tags for produced or consumed data on

page 14

RPI limitations and negotiated default on page 23

Set RPI limits, default for producer tag on page 25

RPI I/O faults on page 37

Renamed Allow Consumed Tags to Use RPI

Provided by Consumer to Allow Consumed Tags to

Use RPI Provided by Producer parameter

Set up the consuming controller on page 28 Renamed Set up the consumer tag to Set up the

consuming controller and updated the procedure

Rockwell Automation Publication 1756-PM011J-EN-P - February 2018 5

Table of contents

Additional Resources...................................................................................... 7

Legal notices................................................................................................... 8

Chapter 1

Introduction................................................................................................... 11

Controllers and networks that support produced/consumed tags.................. 12

Connection requirements of a produced or consumed tag............................ 12

Considerations when migrating projects that contain multicast produce tags

...................................................................................................................... 13

Organize tags for produced or consumed data.............................................. 14

Adjust for bandwidth limitations............................................................ 15

Create a produced tag ................................................................................... 16

Create a consumed tag.................................................................................. 18

Additional steps for a PLC-5C controller............................................... 22

RPI limitations and negotiated default.......................................................... 23

Set RPI limits, default for producer tag........................................................ 25

Unicast connection option...................................................................... 27

Set up the consuming controller ................................................................... 28

Verify consumed tag acceptance .................................................................. 29

Produced and consumed RPI scenarios........................................................ 32

Scenario 1............................................................................................... 32

Scenario 2............................................................................................... 33

Scenario 3............................................................................................... 34

Scenario 4............................................................................................... 35

1769-L2x and 1769-L3x RPI limits.............................................................. 35

RPI I/O faults................................................................................................ 37

Chapter 2

Introduction................................................................................................... 39

Produce a large array.................................................................................... 40

Preface

Produce and

Consume a Tag

Produce a Large

Array

Index

Rockwell Automation Publication 1756-PM011J-EN-P - February 2018 7

Preface

This manual details how, with a Logix 5000 controller, to produce and

consume standard tags and produce a large array. For information on

produced/consumed safety tags, refer to the documentation specific to your

controller.

This manual is one of a set of related manuals that show common procedures

for programming and operating Logix 5000™ controllers.

For a complete list of common procedures manuals, refer to the Logix 5000

Controllers Common Procedures Programming Manual , publication 1756-

PM001 .

The term Logix 5000 controller refers to any controller that is based on the

Logix 5000 operating system.

These documents contain additional information concerning related

Rockwell Automation products.

Resource Description

Replacement Guidelines: Logix5000

Controllers Reference Manual ,

publication 1756-RM100

Provides guidelines for migrating

projects from ControlLogix 5560/5570

controllers to ControlLogix 5580

controllers, and from CompactLogix

5370 controllers to CompactLogix 5380

controllers.

ControlLogix 5580 and GuardLogix

5580 Controllers User Manual ,

publication 1756-UM543

Provides information about designing a

system, operating a ControlLogix or

GuardLogix-based 5580 controllers

system, and developing applications.

CompactLogix 5380 and Compact

GuardLogix 5380 Controllers User

Manual , publication 5069-UM001

Explains how to use the CompactLogix

and Compact GuardLogix 5380

Controllers.

GuardLogix 5570 Controllers User

Manual , publication 1756-UM022 Describes the GuardLogix-specific

procedures to configure, operate, and

troubleshoot your controller.

Compact GuardLogix 5370 Controllers

User Manual , publication 1769-UM022 Describes the necessary tasks to install,

configure, program, and operate a

Compact GuardLogix 5370 controller.

Industrial Automation Wiring and

Grounding Guidelines , publication

1770-4.1

Provides general guidelines for

installing a Rockwell Automation

industrial system.

Product Certifications webpage,

available at

http://ab.rockwellautomation.com

Provides declarations of conformity,

certificates, and other certification

details.

You can view or download publications at

http://www.rockwellautomation.com/literature . To order paper copies of

technical documentation, contact your local Rockwell Automation distributor

or sales representative.

Additional

Resources

Preface

8Rockwell Automation Publication 1756-PM011J-EN-P - February 2018

Reserved. Printed in USA.

This document and any accompanying Rockwell Software products are

copyrighted by Rockwell Automation Technologies, Inc. Any reproduction

and/or distribution without prior written consent from Rockwell Automation

Technologies, Inc. is strictly prohibited. Please refer to the license agreement

for details.

End User License Agreement (EULA)

You can view the Rockwell Automation End-User License Agreement

("EULA") by opening the License.rtf file located in your product's install

folder on your hard drive.

Other Licenses

The software included in this product contains copyrighted software that is

licensed under one or more open source licenses. Copies of those licenses are

included with the software. Corresponding Source code for open source

packages included in this product can be located at their respective web

site(s).

You may alternately obtain complete Corresponding Source code by

contacting Rockwell Automation via our Contact form on the Rockwell

Automation website: http://www.rockwellautomation.com/global/about-

us/contact/contact.page .

Please include "Open Source" as part of the request text.

The following open source software is used in this product:

Software Copyright License Name License Text

other contributors MIT License jQuery 2.1.1 License

Version 2.0 OpenSans License

Trademark Notices

Allen-Bradley, ControlBus, ControlFLASH, Compact GuardLogix, Compact

I/O, ControlLogix, CompactLogix, DCM, DH+, Data Highway Plus,

DriveLogix, DPI, DriveTools, Explorer, FactoryTalk, FactoryTalk

Administration Console, FactoryTalk Alarms and Events, FactoryTalk Batch,

FactoryTalk Directory, FactoryTalk Security, FactoryTalk Services Platform,

FactoryTalk View, FactoryTalk View SE, FLEX Ex, FlexLogix, FLEX I/O,

Legal notices

Preface

Rockwell Automation Publication 1756-PM011J-EN-P - February 2018 9

Guard I/O, High Performance Drive, Integrated Architecture, Kinetix,

Logix5000, Logix 5000, Logix5550, MicroLogix, DeviceNet, EtherNet/IP,

PLC-2, PLC-3, PLC-5, PanelBuilder, PowerFlex, PhaseManager, POINT

I/O, PowerFlex, Rockwell Automation, RSBizWare, Rockwell Software,

RSEmulate, Historian, RSFieldbus, RSLinx, RSLogix, RSNetWorx for

DeviceNet, RSNetWorx for EtherNet/IP, RSMACC, RSView, RSView32,

Rockwell Software Studio 5000 Automation Engineering & Design

Environment, Studio 5000 View Designer, SCANport, SLC, SoftLogix,

SMC Flex, Studio 5000, Ultra 100, Ultra 200, VersaView, WINtelligent,

XM, SequenceManager are trademarks of Rockwell Automation, Inc.

Any Rockwell Automation logo, software or hardware product not

mentioned herein is also a trademark, registered or otherwise, of Rockwell

Automation, Inc.

Other Trademarks

CmFAS Assistant, CmDongle, CodeMeter, CodeMeter Control Center, and

WIBU are trademarks of WIBU-SYSTEMS AG in the United States and/or

other countries. Microsoft is a registered trademark of Microsoft Corporation

in the United States and/or other countries. ControlNet is a trademark of

ControlNet International. DeviceNet is a trademark of the Open DeviceNet

Vendors Association (ODVA). Ethernet/IP is a trademark of ControlNet

International under license by ODVA.

All other trademarks are the property of their respective holders and are

hereby acknowledged.

Warranty

This product is warranted in accordance with the product license. The

product’s performance may be affected by system configuration, the

application being performed, operator control, maintenance, and other related

factors. Rockwell Automation is not responsible for these intervening factors.

The instructions in this document do not cover all the details or variations in

the equipment, procedure, or process described, nor do they provide

directions for meeting every possible contingency during installation,

operation, or maintenance. This product’s implementation may vary among

users.

This document is current as of the time of release of the product; however,

the accompanying software may have changed since the release. Rockwell

Automation, Inc. reserves the right to change any information contained in

this document or the software at any time without prior notice. It is your

responsibility to obtain the most current information available from Rockwell

when installing or using this product.

Environmental compliance

Rockwell Automation maintains current product environmental information

on its website at

Preface

10 Rockwell Automation Publication 1756-PM011J-EN-P - February 2018

http://www.rockwellautomation.com/rockwellautomation/about-

us/sustainability-ethics/product-environmental-compliance.page

Contact Rockwell Automation

Customer Support Telephone — 1.440.646.3434

Online Support — http://www.rockwellautomation.com/support/

Autres manuels pour Studio 5000 Logix Emulate

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Allen-Bradley Contrôleurs

Allen-Bradley

Allen-Bradley PowerFlex 4 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1769 CompactLogix Manuel utilisateur

Allen-Bradley

Allen-Bradley 1769-L16ER-BB1B Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 755 Manuel utilisateur

Allen-Bradley

Allen-Bradley GuardPLC 160 Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex400 Manuel utilisateur

Allen-Bradley

Allen-Bradley SLC 500 Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 70 Manuel utilisateur

Allen-Bradley

Allen-Bradley powerflex 700 Manuel utilisateur

Allen-Bradley

Allen-Bradley Kinetix 6000 Manuel utilisateur

Allen-Bradley

Allen-Bradley Micro830 Manuel utilisateur

Allen-Bradley

Allen-Bradley powerflex 700 Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 700L Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 700H Manuel utilisateur

Allen-Bradley

Allen-Bradley Compact GuardLogix 5370 Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 400 Manuel utilisateur

Allen-Bradley

Allen-Bradley DriveLogix 5730 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1512B Manuel utilisateur

Allen-Bradley

Allen-Bradley SMC-50 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1305-RFB-5-A Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex AFE Manuel utilisateur

Allen-Bradley

Allen-Bradley SMC-3 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1305 Series Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 70 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur