Aleis ISO-FFW-6000 Manuel utilisateur

Aleis ISO-FFW Series Operational Manual

Aleis Pty Ltd

ACN 130 754 826

www.aleis.com Ph: 07 46685942

Reader

User Guide

ISO-FFW Series Reader

ISO-FFW-6000 Standard unit with Read and On LEDs Only

ISO-FFW-8030 Display and 8030 Keypad

ISO-FFW-8030-EXP With 9000 expansion board fitted

ISO-FFW-8030- EXP-CLK With 9000 expansion board and Clock fitted

ISO-FFW-9060 Display and 9060 Data Entry Keypad

ISO-FFW-9060EXP With 9000 expansion board fitted

ISO-FFW-9060- EXP-CLK With 9000 expansion board and Clock fitted

Version 1.00 07/03/2011

IMPORTANT!

This User Guide must be read in conjunction with Reader, prior to use.

Copyright Aleis Pty Ltd 2011

A1064AUS

Aleis ISO-FFW Series Operational Manual

2 of 45

TABLE OF CONTENTS

Regularity Notices and Conformity .....................................................................................................................................................4

ISO-FFW Series Reader Instructions..................................................................................................................................................5

1.0

The Aleis ISO-FFW Series System ........................................................................................................................................6

2.0

Preparation for Use...................................................................................................................................................................7

3.0

Warnings....................................................................................................................................................................................7

4.0

Care and Maintenance..............................................................................................................................................................7

5.0

Methods of connection..............................................................................................................................................................8

5.1

Direct connection with your scale indicator:..........................................................................................................................8

5.2

Direct connection with your computer:..................................................................................................................................8

5.3

Interface Protocol...................................................................................................................................................................8

6.0

Optional Power..........................................................................................................................................................................9

7.0

Using External Power Supply ..................................................................................................................................................9

8.0

The ISO-FFW8030 Keypad....................................................................................................................................................9

9.0

ISO-FFW8030 Reader Method of Use.....................................................................................................................................9

9.1 How to: Read & Store RFIDs..............................................................................................................................................10

9.2 How to: Create Sessions using menu...................................................................................................................................10

9.3 How to: Create Sessions using F1 and F2 Keys...................................................................................................................10

9.4 How to: Upload RFIDs into the Reader...............................................................................................................................10

9.5 How to: Compare RFIDs in the Reader ...............................................................................................................................11

9.6 Formatting the File System..................................................................................................................................................13

9.7 How to Format your reader..................................................................................................................................................13

10.0

ISO-FFW8030 Menu Tree......................................................................................................................................................14

10.1 Session Menu.....................................................................................................................................................................14

10.2 Read Setup Menu...............................................................................................................................................................15

10.3 System Setup Menu ...........................................................................................................................................................16

10.4 Reader Information Menu..................................................................................................................................................17

10.5 Memory Status Menu.........................................................................................................................................................17

11.0

ISO-FFW8030 Audio and Visual Alerts................................................................................................................................18

12.0

ISO-FFW8030 Menu...............................................................................................................................................................19

12.1 Session...............................................................................................................................................................................19

12.11

New.................................................................................................................................................................19

12.12

Send to PC........................................................................................................................................................19

12.13

Clear.................................................................................................................................................................19

12.14

Select................................................................................................................................................................19

12.2

Read Setup.......................................................................................................................................................................19

12.21

Load/Save Profile.............................................................................................................................................19

12.22

Comparison......................................................................................................................................................19

12.23

Alert .................................................................................................................................................................19

12.24

Storage .............................................................................................................................................................19

12.25

Send .................................................................................................................................................................19

12.3 System Setup......................................................................................................................................................................20

12.31

Communications ..............................................................................................................................................20

12.32

Display.............................................................................................................................................................20

12.33

Buzzer..............................................................................................................................................................21

12.34

Sleep Timer......................................................................................................................................................21

12.35

Read Timer.......................................................................................................................................................21

12.36

Load Defaults...................................................................................................................................................21

12.37

Set Date/Time ..................................................................................................................................................21

12.38

RFM Settings ...................................................................................................................................................21

12.4 Reader Information............................................................................................................................................................22

12.5 Memory Status...................................................................................................................................................................22

13.0 The ISO-FFW9060 Qwerty Keypad........................................................................................................................................23

14.0

ISO-FFW9060 Reader Methods of Use................................................................................................................................24

14.1

Record RFID No’s only (no data entry)...........................................................................................................................24

14.2

Quick Data Entry – One only use of Template................................................................................................................24

Aleis ISO-FFW Series Operational Manual

3 of 45

14.3 Templates...........................................................................................................................................................................26

14.4 Data Entry using Function Keys for a pre made Template.................................................................................................29

14.5 How to: Upload RFIDs into the Reader.............................................................................................................................30

14.6 How to: Compare RFIDs in the Reader .............................................................................................................................31

14.7 Formatting the File System................................................................................................................................................32

2.8 How to Format your reader..................................................................................................................................................32

15.0

ISO-FFW9060 Menu Tree.....................................................................................................................................................33

15.1 Session Menu.....................................................................................................................................................................33

15.2 Read Setup Menu...............................................................................................................................................................34

15.3 System Setup Menu ...........................................................................................................................................................35

15.4 Reader Information Menu..................................................................................................................................................36

15.5 Memory Status Menu.........................................................................................................................................................36

16.0

ISO-FFW9060 Audio and Visual alerts.................................................................................................................................37

17.0

ISO-FFW9060 Menu...............................................................................................................................................................38

17.1 Session...............................................................................................................................................................................38

17.11

New.................................................................................................................................................................38

17.12

Data Entry Setup..............................................................................................................................................38

17.13

Data Entry Locking..........................................................................................................................................38

17.14

Templates.........................................................................................................................................................38

17.15

Send to PC........................................................................................................................................................38

17.16

Clear.................................................................................................................................................................38

17.17

Change Name...................................................................................................................................................38

17.18

Select................................................................................................................................................................38

5.2 Read Setup...........................................................................................................................................................................38

17.21

Load/Save Profile.............................................................................................................................................38

17.22

Comparison......................................................................................................................................................38

17.23

Alert .................................................................................................................................................................38

17.24

Storage .............................................................................................................................................................39

17.25

Send .................................................................................................................................................................39

17.3 System Setup......................................................................................................................................................................39

17.31

Communications ..............................................................................................................................................39

17.32

Display.............................................................................................................................................................40

17.33

Buzzer..............................................................................................................................................................40

17.34

Sleep Timer......................................................................................................................................................40

17.35

Read Timer.......................................................................................................................................................40

17.36

Load Defaults...................................................................................................................................................40

17.37

Set Date/Time ..................................................................................................................................................41

17.38

RFM Settings ...................................................................................................................................................41

17.4 Reader Information............................................................................................................................................................41

17.5 Memory Status...................................................................................................................................................................42

18.0

ISO-FFW SERIES Reader Specifiactions.............................................................................................................................42

19.0

Aleis Conditions of Sale..........................................................................................................................................................43

Aleis ISO-FFW Series Operational Manual

4 of 45

REGULARITY NOTICES AND CONFORMITY

USA – FCC

Information to the user (FCC Part 15.105)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encourage to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

Consult the dealer or an experienced radio/TV technician for help

Modification warning (FCC Part 15.21)

Warning: Any changes or modifications not expressively approved by Aleis could void the user's authority to

operate this equipment.

Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Europe CE

This device has been tested and meets the Electromagnetic Compatibility requirements for EN300 330

Australia and New Zealand - C-Tick

This device has been tested and meets the Electromagnetic Compatibility requirements for CISPR 11

Antenna Warning

This device has been designed to operate with the antennas listed below. The ISO-FFW Series Readers are

only approved with the detachable antennas below. In accordance with RSS-GEN Issue 2 June 2007 Section

7.1.4 and FCC Part 15.21, antennas not included in this list are strictly prohibited for use with this device.

Aleis Part Number Antenna Housing Length Antenna Description

4022 300mm 200mm Ferrite rod antenna

4023 500mm 200mm Ferrite rod antenna

Aleis ISO-FFW Series Operational Manual

5 of 45

Important User Instructions

ISO-FFW SERIES READER INSTRUCTIONS

IMPORTANT

Must be read prior to using system

The following instructions must be wholly adhered to or permanent damage to the antenna/reader and/or permanent

data loss can occur. Non-conformance to the handling and operating instructions will immediately void all warranties

for the antenna/reader and software.

1. WARNING: All Aleis warranties will be immediately voided if this reader is used in any way with

Hyperterminal.

2. Have only one system at a time switched on unless Master/Slaved.

3. Do not hose or submerge antenna/reader in water.

4. Use only a very lightly damp cloth to clean antenna/reader.

5. Do not use chemicals to clean antenna/reader.

6. Do not drop reader boxes as electronics are contained within.

7. All boxes with seals are to be kept sealed.

8. Do not remove any VOID stickers from readers.

9. Do not drill holes in antenna.

10. Aleis Conditions of Sale apply.

Aleis ISO-FFW Series Operational Manual

6 of 45

1.0 THE ALEIS ISO-FFW SERIES SYSTEM

The ISO-FFW series is available in different configurations

ISO-FFW-6000 Standard unit with Read and On LEDs Only

ISO-FFW-8030 Display and 8030 Keypad

ISO-FFW-8030-EXP With 9000 expansion board fitted

ISO-FFW-8030- EXP-CLK With 9000 expansion board and Clock fitted

ISO-FFW-9060 Display and 9060 Data Entry Keypad

ISO-FFW-9060EXP With 9000 expansion board fitted

ISO-FFW-9060- EXP-CLK With 9000 expansion board and Clock fitted

Aleis ISO-FFW Series Operational Manual

7 of 45

2.0 PREPARATION FOR USE

When you have mounted your Aleis ISO-FFW Series Reader, and you are ready to use it,

please ensure the following steps are closely followed:

When inserting or attaching a new electronic RFID device into or on an animal, keep all

other electronic RFID devices a minimum of 3 meters away from the Aleis ISO-FFW Series

Reader. This will ensure you only read the device you are inserting or attaching.

Keep computers a minimum of 3 meters away from the Aleis ISO-FFW Series Reader.

Securely fasten the computer lead into your scale indicator or computer – screw the

connectors into place.

3.0 WARNINGS

Never open the reader box.

Never drill the antenna.

Some magnetic fields will affect reading, such as some computers, computer monitors,

electric motors and generators. This may affect your read range and therefore your reader is

being interfered with.

4.0 CARE AND MAINTENANCE

Keep all spare electronic RFID devices away from the Aleis ISO-FFW Series Reader.

Protect computer and power leads from animals if the system is left in the yards.

Treat the system with care; Aleis has built this system for the cattle yards, but it is an

electronic unit and must be treated accordingly.

Keep all reader connectors clean and screw covers on fittings when not in use.

MOST IMPORTANT: Aleis’ customers are our highest priority, and if you have any

queries, please feel most welcome to contact your Aleis distributor.

Aleis ISO-FFW Series Operational Manual

8 of 45

5.0 METHODS OF CONNECTION

There are two general methods of connecting your Aleis ISO-FFW Series System.

5.1 Direct connection with your scale indicator:

The Aleis ISO-FFW Series Reader is compatible with all scale indicators accepting

the standard RFID format from a reader. You may need to contact your scale

indicator manufacturer for setup instructions.

There is no setup required on the reader end – simply plug in your reader to your

scale indicator by plugging the 9-pin female plug into the 9-pin male plug on your

scale indicator.

5.2 Direct connection with your computer:

The ISO-FFW Series Reader can also link directly with your computer. The Aleis

ISO-FFW Series Reader is compatible with all major herd management programs

accepting a standard real-time RFID from a reader. You may need to contact your

herd management software provider for exact setup instructions.

There is no setup required on the reader end – simply plug in your reader to your

computer by plugging the 9-pin female plug into the 9-pin male plug on the back of

your computer.

5.3 Interface Protocol

When you are setting up the ISO-FFW Series Reader to read directly into your scale

indicator or computer, you may be asked for the ‘interface protocol’ by the scale

indicator manufacturer or software provider. These settings are as follows:

Baud Rate: 9600

Data Bits: 8

Parity: None

Stop Bits: 1

Communication: ASCII Serial

Aleis ISO-FFW Series Operational Manual

9 of 45

6.0 OPTIONAL POWER

Only use high quality regulated linear power supplies or solar panels. Please contact Aleis

with any queries, you may have.

Some switch mode power supplies are NOT suitable and must not be used.

7.0 USING EXTERNAL POWER SUPPLY

If you purchased a ISO-FFW System without a power supply, then you will need to use an

power supply to power the reader. An external 12 volt battery can be used, or an regulated

linear power supply. DO NOT USE A SWITCH MODE POWER SUPPLY.

The power supply must be approved for use in your country and meet all your countries

emission requirements.

8.0

THE ISO-FFW8030 KEYPAD

9.0 ISO-FFW8030 READER METHOD OF USE

Helpful Hints

First, it is recommended to go to Menu Setup diagram in User Guide, then go to MENU key

on reader, and become familiar with the settings in the reader while looking at the User

Guide.

Pressing C once takes you back to previous step.

Keep session numbers recorded somewhere so you know which cattle are recorded in

individual session numbers.

Screen will automatically turn off if not used within 30 minutes. (Menu selectable)

Aleis ISO-FFW Series Operational Manual

10 of 45

9.1 How to: Read & Store RFIDs

1. Turn the 8030 Series Reader ON.

2. When Reading Press the button on the wand and wave the wand past the RFID device -

ear tag or rumen pellet. When reading rumen pellets, simply wave the wand in a reverse

‘L’ pattern behind the front leg of the animal, or in front of the brisket.

3. When you have finished reading, you may turn the Reader OFF, and download it later at

your PC, or you may start a new session and read another group of animals.

9.2 How to: Create Sessions using menu.

1. To start a new session to read another group of animals, simply press the MENU button.

2. The word ‘Session’ will be highlighted, press the OK button.

3. The word ‘New’ will be highlighted, press the OK button.

4. Select Yes by using the left arrow key, then press the OK button. (If previous sessions are

empty, you will not be able to create a new session)

5. Press the C button (located to the left of the MENU button) until you return to the main

reading screen, and read the next group of cattle.

9.3 How to: Create Sessions using F1 and F2 Keys.

1. Press F2 to end current session.

2. Press F1 to start new session. Four Beeps will be heard.

Note: you can start a new session even if the one you have ended has no RFID devices in it.

9.4 How to: Upload RFIDs into the Reader

The feature of uploading RFIDs into the 8030 portable wand is to allow you to find particular

RFIDs that you need to identify. For example, if you need to find a particular animal that was

treated with a certain medicinal treatment, you can upload the RFID into the reader. When you

read the animal with that RFID, the reader will alert you with a long series of beeps so that you

will know you have found the animal you were looking for.

To use this feature, there are two steps you will need to perform:

1. Create a file to upload into the reader.

2. Upload the RFIDs into the reader.

Before starting you will need:

1. Aleis DataLink installed on your computer.

2. A working COM port – you can check this by turning your 8030 reader on, and then opening

Aleis DataLink. Down the bottom right corner of the Aleis DataLink screen, you should see

that the software has connected to a particular unit.

3. A list of RFIDs that you want to put into the reader.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Aleis Lecteur de cartes

Aleis

Aleis ISO-9060 Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

ACS

ACS ACR122L Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

ACS

ACS ACR310 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur