Alcorn Mcbride V-Page VP4X Manuel utilisateur

V-Page VP4X User’s Guide

August 31, 2018

TABLE OF CONTENTS

TABLE OF CONTENTS .............................................................................................................. 1

INTELLIGENT DANTE/AES67 PA STATION

August 31, 2018

WELCOME! ................................................................................................................................... 3

PRODUCT FEATURES................................................................................................................ 4

TECHNICAL SUPPORT .............................................................................................................. 4

GETTING STARTED.................................................................................................................... 5

HARDWARE INSTALLATION........................................................................................................................................... 5

LINKING A NEW V-PAGE AND Q-SYS CORE TOGETHER ............................................................................................5

AUDIO CONFIGURATION................................................................................................................................................5

HARDWARE INFORMATION.................................................................................................... 6

VP4X OVERVIEW.............................................................................................................................................................6

NETWORK DESCRIPTIONS .............................................................................................................................................7

ZONE STATUS LEDS.......................................................................................................................................................9

CONFIGURATION OF DIP SWITCHES ............................................................................................................................9

CONNECTORS ...............................................................................................................................................................12

Q-SYS CONFIGURATION AND PLUGIN .............................................................................. 14

Q-SYS V-PAGE PLUGIN:DETAILED VIEW AND EXPLANATION.................................................................................15

Q-SYS V-PAGE PLUGIN:PROPERTIES TAB..................................................................................................................18

LINKING V-PAGE STATIONS TO QSYS ............................................................................... 19

DANTE CONTROLLER SOFTWARE...................................................................................... 19

AES67 AUDIO CONFIGURATION.......................................................................................... 19

FIRMWARE UPDATE ................................................................................................................ 21

FIRMWARE UPDATE PROCEDURE ................................................................................................................................21

TROUBLESHOOTING GUIDE / FAQ...................................................................................... 22

LOCATING A V-PAGE ON A NETWORK ............................................................................. 24

ACCESSORIES............................................................................................................................ 25

MICROPHONE ................................................................................................................................................................25

RACK MOUNTING KITS................................................................................................................................................25

HARDWARE SPECIFICATIONS.............................................................................................. 26

August 31, 2018

WELCOME!

Thank you for purchasing The Alcorn McBride V-Page™ Network-enabled paging station. The V-Page provides

facility-wide intelligent paging using Dante™ Audio Networks and the Q-Sys™ PA Station Protocol.

Configuration of your paging network including zone assignments, button and light behaviors and zone priorities is

completely soft programmable using the Q-Sys Designer and administrator software.

Each V-Page station includes illuminated paging zone buttons and microphone input.

A single Ethernet (Cat5e or greater) cable carries audio, power, control and monitor data between the V-Page

station and the Q-Sys system. A facility may incorporate an unlimited number of V-Page stations by simply

connecting them to Power Over Ethernet (PoE) network switches.

SFP connector for an optional transceiver (not included) allows to use fiber cable for data communication.

The V-Page Model VP4X is a four-button station with a 5-pin XLR connector and mounting bracket for a push-to-

talk microphone. It is intended for use with a coiled cord dynamic microphone and mounting bracket, such as the

included MIC-US600EL.We carefully designed this product to be the perfect solution for the unique challenges of

on-board (vehicle-based) audio and show control systems for themed attractions.

August 31, 2018

PRODUCT FEATURES

The V-Page offers a wide range of features including:

•Dante and AES67 Audio Network Compatible

•Q-Sys PA Station Protocol

•Audio, Control and Power on one ethernet cable

•Power-Over-Ethernet (Class 3) with indicator

•4 LED Illuminated Page Zone Buttons

•Breakaway feature.

•5-Pin Mic Input Female XLR

•Adjustable LED Brightness

•Mounts in standard 4-gang duplex box

•SFP cage for optional fiber optic cable line

TECHNICAL SUPPORT

Now that we’ve tantalized you with all of the wonderful things this product can do, I’ll bet you’re chomping at the

bit to flip all the switches and push all the buttons. Not so fast! Before we get to the fun stuff, we just want to

take a moment to remind you that we are here to help. Chances are that you’re building something really cool

and we want you to have access to the resources and support you need to be successful.

To start, you’ll find a wealth of information on our website. This includes Application Notes that give you detailed

documentation and examples for how this product is used in common types of themed entertainment projects.

You’ll also find the latest downloads for software, firmware, drawings, 3D models, cutsheets, and other helpful

resources on our Support page. The Knowledge Base is especially handy for common questions and helpful

troubleshooting tips. And last, but certainly not least, you always have our friendly and mildly entertaining staff

available by email or telephone.

Application Notes

http://www.alcorn.com/applications

Support Resources

http://www.alcorn.com/support

Knowledge Base (FAQ)

https://alcornmcbride.zendesk.com/hc/en-us

Email Support

[email protected]

Telephone Support

(407) 296-5800 (Mon-Fri 9am-6pm EST)

August 31, 2018

GETTING STARTED

Alright, time to roll up your sleeves and get to work! This section will guide you through basic concepts that will

help you get on your way with V-Page.

The V-Page station(s) communicates with a Q-Sys Core via network connection using a Plugin. To install the plugin

you need to download the file from the website and copy and paste the component to your design. The plug in can

be downloaded from our website at http://alcorn.com/support/software/

*You must be running Q-Sys Firmware 7.0.0 or above and V-Page firmware 2.00 or above for the Plugin to

work. To learn how to do a firmware update please refer to the firmware update section of this manual.

There are three steps that need to be completed to ensure that V-Page and Q-Sys function together properly.

1) V-Page Hardware Installation

2) Linking a V-Page and Q-Sys Core together

3) Configure the audio routing using Q-Sys and Dante controller

HARDWARE INSTALLATION

a. Make sure that all the dip switches are in the “Off” Position

b. Power on V-Page by connecting Ethernet port to the Power Over Ethernet (PoE) switch and wait 10

seconds for V-Page unit to initialize. If no Power Over Ethernet (PoE) is available, refer to the VP4X

Hardware section to learn about using an external power supply.

c. Be sure to have your V-Page units on the same network as the Q-Sys Core

LINKING A NEW V-PAGE AND Q-SYS CORE TOGETHER

a. Single click the V-Page Plugin block for the station you would like to link and ensure your property

settings are configured. (Refer to Plugin Properties section of this manual).

b. Connect to the Q-Sys Core and then double click to open the plugin.

c. Press and hold buttons 1,2 and 4 on the V-Page hardware until the button lights start scrolling down.

d. On the Q-Sys plugin, on the top right corner click “Link”. The station LED’s will blink for a second and

the station will re-boot. After a few seconds the station LED’s will be solid green and the plugin “Online”

LED will light up.

AUDIO CONFIGURATION

a. Launch Dante Controller.

b. Click on the “Device Info” tab and double click on the V-Page station.

c. Enable AES67 under AES67 tab. Once the station has been rebooted, it’s time to create an AES67 multi-

cast flow. Click on “Add Multicast Flow”.

d. Check the “AES67 Flow” box. Add your channel into the new flow. Click “Create”.

e. In Q-Sys Designer, double click your AES67 Receiver Module and pick the new Stream Name.

August 31, 2018

HARDWARE INFORMATION

VP4X OVERVIEW

V-Page Model VP4X includes 4 Illuminated Paging Zone buttons, a 5-Pin Female XLR connector and a clip holder

designed for a Push-to-Talk microphone.

August 31, 2018

NETWORK DESCRIPTIONS

V-Page is part of a system consisting of a Q-Sys Core, Network Router(s)/Switch(s), and the V-Page Stations

themselves. A single physical connection handles both control and audio transport this connection can either be

via Ethernet cables or Fiber Optics if your installation length exceed 328 ft.

August 31, 2018

Note: This is the recommended method where Dante Audio and Control are using the same network switch. Q-

Lan and Dante requires a different QoS configuration while the LAN Aux Network act as a “generic” ethernet

port. Always remember to keep the V-Page units control NIC in the same network as your QSC Q-SYS Core.

August 31, 2018

ZONE STATUS LEDS

On a VP4X, each Zone Select pushbutton has a Green/Red indicator.

LED State

Description

All Cycling Colors

Factory Test Mode

All Blinking (Rapid)

Firmware Update Mode

Blinking Green

Zone Selected

All Sequential Blinking Green

Link Active

All Blinking Red

No Sync –No Q-Sys Core Detected

CONFIGURATION OF DIP SWITCHES

The configuration DIP switches are located on the side of the V-Page. Changing the states of these switches alter

the behavior of the V-Page. DIP switching may perform different functions during power up and during runtime.

Default position for all the switches for normal operation is OFF (UP if looking from the side of the unit).

V-Page can power up in one of the following modes (based on switches configuration):

- Normal Mode.

- Factory Test Mode.

- Firmware Update Mode.

During power up, the state of the switch (ON or OFF) determines the action.

During runtime, toggling the DIP switch (OFF => ON => OFF) will perform specified action. See the descriptions

below.

NOTE: Not all switches have a power up function associated with it.

NOTE: Not all switches have a runtime function associated with it.

August 31, 2018

DIP SWITCH 1: LINK MODE

RUNTIME –LINK:

OFF => ON => OFF: Activate/deactivate Link. Toggle once to activate, toggle again to deactivate. Link will also

exit on successful completion or will auto-exit after 60 seconds (default).

Link can be used in conjunction with Q-Sys to assign station ID, static IP/Port and Q-Sys feedback information to

the V-Page. In a sense, this pairs the V-Page with a specific Q-Sys Core. While Link is active, LEDs sequentially

light up, one at a time.

DIP SWITCH 2: FIRMWARE UPDATE MODE / RESET FACTORY DEFAULTS

POWER UP –FIRMWARE UPDATE MODE:

ON: Enter Firmware Update mode. In this mode of operation, V-Page disregards all its settings and the rest of

the DIP switches and uses a default IP of 192.168.0.254. Web server serves up Firmware Update page. For a

detailed explanation on Updating V-Page firmware, see the Firmware Update section.

To exit Firmware Update Mode, return the switch to OFF position and perform a power cycle.

OFF: Default state of the switch for normal operation.

NOTE: It’s advised to use AMI Terminal to invoke the firmware update. The V-Page will enter the firmware update

mode on the last known IP instead of fixed 192.168.0.254

RUNTIME –LOAD FACTORY DEFAULTS (IN NORMAL OPERATION MODE ONLY):

OFF => ON => OFF: Perform factory defaults. All LEDs will light up solid RED for a few seconds, then V-Page

will perform reset to defaults. Any stored settings will be erased from non-volatile memory and restored to their

factory defaults. This affects Dante settings as well.

NOTE: Loading Factory Defaults will erase all V-Page settings!!

Autres manuels pour V-Page VP4X

Table des matières

Autres manuels Alcorn Mcbride Microphone

Alcorn Mcbride

Alcorn Mcbride V-Page VP4X Manuel utilisateur

Manuels Microphone populaires d'autres marques

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuel utilisateur

DAPAudio

DAPAudio RM-101 Manuel utilisateur

AKG

AKG CHM 21 Manuel utilisateur

Sennheiser

Sennheiser evolution wireless series EM 100 Manuel utilisateur

Sony

Sony C-48 Manuel utilisateur

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuel utilisateur

Shure

Shure WH30TQG Manuel utilisateur

auna PRO

auna PRO MIC-900 Manuel utilisateur

AKG

AKG D 3800 Manuel utilisateur

Shure

Shure KSM141 Manuel utilisateur

MAIIN SOUND

MAIIN SOUND IIN style Manuel utilisateur

Earthworks

Earthworks TC25 Manuel utilisateur

Sennheiser

Sennheiser evolution D1 Manuel utilisateur

Alesis

Alesis MicLink Wireless Manuel utilisateur

DSPPA

DSPPA D6234 Manuel utilisateur

Monacor

Monacor IMG STAGELINE ECM-300B Manuel utilisateur

Ansr Audio

Ansr Audio Scan16 Manuel utilisateur

Shure

Shure MXA710 Series Manuel utilisateur