ALcom FX-79 Manuel utilisateur
SAFETY AND GENERAL INFORMATION
Important Information for Safe and Efficient Operation
Please read this information before using your radio.
Safety and General
1. Do not transmit more than 50% of time. It is important as the radio generates
measurable RF energy exposure only when transmitting.
. Do not open the radio. Any unauthorized modification may invalidate the
guarantee.
3. Radio frequency signals transmitted may cause interference to hearing aids.
4. Turn off the radio when near medical equipment.
5. This product should not be used by people with pacemakers.
6. Do not use the radio when driving a vehicle or operating machinery.
7. Do not use the radio when on board aircraft.
8. Do not hold the antenna when transmitting.
9. Do not use the radio when the antenna has damaged.
2
10. Turn off the radio and remove the batteries if you are not going to use it for a
long time.
11. Do not attempt to charge alkaline batteries.
OPERATIONAL CAUTIONS
1. Never dispose of batteries in a fire. There is a serious risk of explosion and /or
the release of highly toxic chemicals.
. Do not expose your product to direct sunlight, extreme cold or place it near
heating appliances.
3. Do not submerge any part of your product in water and do not use it in damp,
humid or wet conditions.
4. Do not expose your product to fire, explosive or other hazardous conditions.
For example, at petrol stations or areas where explosive products are used.
3
SPECIFICATIONS
Channel: 8
CTCSS-Code: 38
Operating frequency: 446.006 5-446.09375 MHZ
Coverage: 5 km (under optimal condition）
Power supply: 3 x AAA Alkaline or NiMH rechargeable
Transmitter Power (Watts): 0.5ERP
Channel Spacing (kHZ): 1 .5
Water Resistance: Up to 15o according to the IPX standard
PMR446 frequency list
Channel Frequency Description
1 446.006 5 MHz PMR
446.01875 MHz PMR
3 446.031 5 MHz PMR
4 446.04375 MHz PMR
5 446.056 5 MHz PMR
6 446.06875 MHz PMR
7 446.081 5 MHz PMR
8 446.09375 MHz PMR
4
YOUR NEW RADIO
The two-way radio operates on PMR446
frequencies, and can be used in Singapore
where the frequencies are authorized,
subject to applicable regulations.
1. Antenna
2. LCD
3. eadset socket
4.
• Short press to enter menu mode
-- Press one time to enter MENU
mode, press or to select RF
channel.
-- Press two times to enter CTCSS
mode, press or to set CTCSS code.
-- Press three times to enter Baby Monitor mode, press or to activate
or deactivate.
-- Press four times to enter Call Tone mode, press or to set a new call
tone.
5
-- Press five times to enter VOX Section mode, press or to activate
IVOX function with a sensitivity level or deactivate IVOX function.
Note: When you use the unit with a headset accessory, press or only
can select sensitivity level.
-- Press six times to enter Squelch Level mode, press or to set squelch
level.
-- Press seven times to enter Dual channel scan mode, press or to set
dual scan channel or disable it.
-- Press eight times to enter Auto Power Off mode, press or to set auto
power off time or disable it.
-- Press nine times to enter Key Tone mode, press or to enable or
disable it.
-- Press ten times to enter Chronometer mode, press to start counting or
to reset the counter.
-- Press eleven times to enter Roger Beep mode, press or to enable or
disable it.
-- Press twelve times to exit MENU mode.
It will be automatically exited the menu mode if you have not pressed any
key for several seconds when you in any mode.
5.
• Decrease the speaker volume.
6
• Select the next value in the menu.
6.
• Short press to send a single call tone.
• Long press to send the call tone maximum 10 times, and then returns to
standby mode automatically.
7.Indicator light
8.
• Power on/off.
9. PTT
• Push to transmit, release to listen.
• Pressing PTT has 60 seconds limit.
• In menu mode, push to confirm selection.
10.
• Long press to lock/unlock keypad.
11.
• Increase the speaker volume.
• Select the previous value in the menu.
12.
• Push to monitor/scan channels.
13.Charging contacts
7
: displays the battery level
: Displayed when receiving.
: Displayed when transmitting.
: Display when baby monitor function turns on.
: Display when VOX / IVOX function turns on.
: Channel scanning
: Dual channel Scanning
: displays the channel number
: displays the CTCSS Code
: Display when Key tone function
turns on.
: Display when Call tone function
turns on.
: Display when adjust volume level.
: Keypad locked
: Display when talk confirmation tone function turns on.
: Display when auto power off function turns on.
: Display when in chronometer mode.
8
: Squelch level indication.
TURNING YOUR RADIO ON AND OFF
Press and hold to turn your radio on. The radio chirps and the display will show
all feature icons that your radio has available for a brief period. The display will
show the current channel 1 - 8 and interference eliminator code 0 - 38.
Press and hold to turn your radio off.
TALKING AND LISTENING
Please read this manual carefully before using your new radio to ensure that you
operate it both correctly and safely.
Your radio has 8 channels. If you are in a group and you wish to talk to each other,
all radios must be set to the same channel and interference eliminator code
(CTCSS). If you experience interference and need to change channel, ensure that
you change the channel and code of all radios in your group.
• For maximum clarity, hold radio 5 to 7 centimeters from mouth.
• Press and hold PTT key and speak into the microphone. LED indicator light
glows continuously when transmitting.
• To receive messages, release PTT key
Volume
Press in standby mode to increase the speaker volume. The volume level is
9
displayed.
Press in standby mode to decrease the speaker volume.
Time-out Timer
The time-out timer feature helps extend battery life by preventing accidental
transmission. The radio will emit a continuous warning tone after PTT is pressed
for 60 continuous seconds and will stop transmitting.
Cha el Busy I dicator
When a channel is busy, the LED flashes twice per second.
Cha el
1. Press button the channel number will begin to flash.
. Use or button to change channel.
3. Press PTT button to set the new channel or to continue set up.
Select CTCSS Code
CTCSS help minimize interference by providing you with a choice of code
combinations. The two radios must be of same channel and CTCSS code in order
to communicate.
1. Press until the code number begins to flash.
. Press or to change the code.
10
Table des matières
