Akaso NEON 1 Manuel utilisateur
USER
MANUAL
NEON 1 Fitness Tracker
CONTENTS
41 - 60
01 - 20
21 - 40
DESCRIPTION OF APPEARANCE INITIAL USE INSTRUCTIONS
Note: ① When you use it for the first time, please fully charge it.
② Do not use a charger more than 5V2A
3. Packing List
Fitness tracker* 1 Charging cable * 1 User manual * 1
1. Product Instructions 1. Instruction About Function Interface
After starting device, at time page, slip upward and downward to switch
different time display style. Slip leftward and rightward to switch different
function pages.
2. Charge Mode
Main Casing
Side Button
Touch Screen
Watch Strap
Charge Piont
Light Sensors
Perfect
Main Page Activity Detection Sleep Monitor
Power Off More Features More Features
2. APP Download (Free, No need to pay)
Search “H Band” in APP store for ios user;
Search “H Band”through Google Play Android users.
Download on the
App Store
GET IT ON
Google Play
1 2
Press the button to open.
English
3. Connecting fitness tracker to APP
When you first open the “H Band” APP, the APP will lead you to bind the
fitness tracker, or “Click to connect device” on the main interface of the
APP. search and find Bluetooth Signal “NEON1” After successfully
connecting the device model, “NEON1”will be shown under the list of
“My Device” in the APP. Also in the left top of the device the sign “ ” will
be present. Please reconnect if the sign ” ” is showing.
4. Connection and Matching Notifications
①Make sure the phone Bluetooth is turned on.
②Make sure the device has a full battery and is turned on or charged
before using.
③ Make sure the device is within 50cm range while connecting with the
phone.
④ If Android phone can not find any device through APP, please check if
it allows “HBAND” to use Bluetooth in the phone permission settings.
Also maek sure turn on GPS tracker at phone setting.
⑤ Fitness tracker may disconnected to Android cellphone ,because the
APP is shut down by the system, please set the "battery saver" to
"No restrictions" and turn on the "autostart" so than it will allow app
to run. Take MI Mix 2 for example as below interface. Different
Andriord phone setting interface may be different. eg. SAMSUNG, the
reference path is Setting > General > Battery manage > Unmonitored
app - Add H Band; Autostart path: setting > Battery> Smart manage
> auto run APP > autostart.
3 4
INTRODUCTION OF MAIN FUNCTIONS
Attention: To ensure the data is valid, please input the right gender,
height, weight and color of skin through APP personal information,
manufacturer can not collect any information .
1. Power on/off
When device is off, press side button for 3 seconds, show booting logo,
and come to the time page, if no operate in 5 seconds, screen will be off
and in standby status.
Press side button for 3 seconds to turn off the device.
2. Multiple time display styles (4 styles)
At time interface, slip upward and downward to switch different time
display style, if no operate in 5 seconds, screen will be off and in standby
status automatically.
3. Activity detection
At time interface, slip leftward and come to activity detection page, show
currant steps, distance and calories.
4. Sport target achievement
You can set a sport target value on your APP, when the number of moving
sports reaches the target value, the device will vibrate reminder.
NEON 1
5 6
5. Heart Rate Manual and Automatic Monitoring
① Manual
User can find the heart rate icon at the bottom of the APP interface. Tap
the icon and the device enters the manual heart rate monitoring interface.
On heart rate detection manual page, device will detect and continuously
capture bpm data and display heart rate . After accumulating bpm data
for 60 seconds, the device will enter into standby mode and bpm data will
not be saved. Path: App dashboard > More > HR icon
6. Sleep monitoring
At dashboard interface, Switch to sleep monitoring interface, show total
sleep time and sleep quality last night.
7. Physical period reminder
Device shows the physical status based on current setting for female, the
function is used to release proper sweet reminder in different physical
status of the user.
Note: If you do not want this function, it can be ignored while setting the
user profile. And once setting was done , but you do not want it, user can
change gender to male, then reset to female, and then you can choose
“ignore”.
②Automatic Monitor
Turn on the button for 24 hours automatically heart rate monitoring
through APP, then the device will capture the heart rate of the user every
then minutes and will present captured date every 30 minutes. After
syncing, bpm data will be presented trough APP.
Path: My device > Switch setting > HR automatic monitoring
8h15m0
08/29 22:55 08/30 07:10
00h55m 07h20m
Sleep quality:General
7 8
Switch setting
Screen-On time 5S
Pair device
More
Disconnect alert
HR automatic monitoring
Wear test
Switch setting
Note:
1. When setting profile at APP, please make sure the personal information
weight /heigth/color skin etc , should be consistent to user.
2. The heart rate data takes around 5-10 seconds to be detected, please
make sure the fitness tracker touch your skin of wrist.
NEON 1
①How to turn on this function ?
User can set gender in their profile within the APP. If the gender is
“female‘’, the system remind the user promptly to set up her physiological
period (If unnecessary then tap to skip). There are four status for female
physiological period.
User information and status will be saved in the APP.
②How to change different physiological status?
Tap and enter into the ‘Personal Settings'’, enter via the physiological
status icon to reset the settings.
Nickname
Gender
Date of birth
Weight
iphone
female
1990-10-10
45.0kg
Cancel
Profile
Confirm
male
female
Nickname
Gender
Date of birth
Weight
iphone
female
1990-10-10
45.0kg
Profile
Height 165cm
BMI 16.5
Skin color
Save
Pormpt
Whether to set the female
cycle function?
lgnore Go to
Nickname
Gender
Date of birth
Weight
iphone
female
1990-10-10
45.0kg
Profile
Height 165cm
BMI 16.5
Skin color
Save
8. Countdown
Go to countdown and set the hour, minutes, seconds at your your fitness
tracker.
9 10
Choose your status
Record menstruatioon cycle
Trying to get pregnant
Pregnant
Mother
Ovulation Tracking Details
Nickname
Gender
iphone
female
Profile
9. Find cellphone
Make sure APP “HBAND” run at backstage, at fitness tracker end, switch
to find cellphone page, click the screen, then cellphone alarm, slip the
fitness screen from left to right, stopping alarming.
Note: Your cellphone should be set as ring mode in advance.
11. Sport modes
Go to sport modes interpage at fitness tracker, there 10 sport modes for
your choice, click to start running.
In the running and walking mode, fitness tracker display exercise time,
heart rate, calories, steps, distance, pace, and other sport modes, it can
only display exercise time, heart rate and calories.
Slip down to the bottom interface, Press "Pause" Pause movement or
“END” exit this interface .
10. Stopwatch
Go to stopwatch of your fitness tracker, press to start or stop the
stopwatch.
Note: Press "Reset" and slip from leftward to rightward to exit current
interface.
11 12
END
Pause
086
08.6
09’07”
0230
22307
12. Alarm clock and Events Reminder
Multiple alarm can be set through “Settings‘’ in the APP. Snooze
reminders for the alarms can be set within the APP. This function can also
add tags for important things which happening in the future. When set
time arrives, the device will vibrate and show those tags.
Path：My device > Alarm setting
13. Notifications
When a new message arrived, the device vibrated and the screen show
relevant notifications and corresponding icons.
Attention: Please switch on APP notifications in advance; besides
message, such as Facebook, Twitter, etc also can be turn on since it is
defaulted to turn off.
14. Call reminder
While call is coming, device keeps vibrating, click volume button to set as
mute, press for 3 seconds to refuse call.
Path: My device > Message notification > Phone call
Add alarm clock
Path: My device > Message notification > Facebook / Twitter, etc.
Add alarm clock
Open All Close All
Add alarm clock
Open All Close All
13 14
15. Sedentary reminder
This function can be turned on using the APP. The user can set a time
value for the warning. When the device detects that the user has sat or
kept still for the set time limit, the device will vibrate to remind the user to
move around.
Path: APP > My Device > Sedentary setting
16. Heart rate Warning
Using the APP, user can choose to turn on the heart rate warning and
preset the upper limit of their heart rate. If the device detects that the
user’s heart rate has reached or exceeded the preset value, it will vibrates
and display the following icon on the device screen.
Path: APP > My device > Heart rate alert
Add alarm clock
Start time 02:00pm
06:00pm
60min
Stop time
Reminder Interval
Save
Heart rate alert
Upper limit of resting
heart tate 97bpm
Save
17. Remote Photogragh
To use the device to take a remote photogragh, the user can turn on the
camera mode in the APP, then quickly shaking the wrist .
Path: APP > Mine > HBAND 5 > Take Photo
18. Waterproof
The device is waterproof for daily life , it can wear when washing hands,
rain or cold shower, not suitable for plunge, dive or soak, hot water.
19. Brightness
Path: Fitness tracker > setting > Brightness
15 16
Note: To avoid the reminder happens during sleep time, the reminder
time period is from 8:00am to 18:00pm.
Note: The green light flash when it is detecting the heart rate, it is normal.
Table des matières
Langues :
Autres manuels Akaso Suivi de forme physique
