AIRVERSA AN1 Manuel utilisateur
User Manual
Aroma Diffuser
Nebulizing
Thank you for choosing our waterless essential oil aroma
diffuser. With the latest cold diffusion technology, it
converts essential oil into nano vapor to approximately
1-3 microns without using heat or water. The diffusing
process does not damage the molecular structure,
therefore maintaining its therapeutic properties for easier
absorption into the body. It is easier, more hygienic
and safer. We make it compact enough for you to fit it
into your car cup holders so that you may take it with you
wherever you go.
As it is compatible with the majority of essential oil bottles
available, it gives you the freedom to choose from a wide
range of fragrances that soothe you, relax you, or refresh
you in a variety of situations. Using it with sanitizing
essential oils can improve unpleasant odors and help
purify the air around it.
Overview1
1
Cautions
Inverted
Tilted
2
DO NOT invert or tilt the device once the oil bottle is installed.
DO NOT use it with camphor tree oil.
DO NOT attempt to disassemble the device.
For more quiet use, ensure the unit is 3 feet away.
Keep the device away from children and pets.
The more concentrated the oil, the less diffusing ability.
If you do not plan to use this device for an extended period
of time, please store the device and the nozzle separately.
Working Temperature: 4°–104°F / 0 – 40°C
Suggested room size: 300-500 sq. ft.
2
What’s in the Box
Standard Oil Bottle Spare Kit
20ml
Diffuser Nozzle Charging Cable
USB-C
3
DO NOT invert or tilt the device once the oil bottle is installed.
DO NOT use it with camphor tree oil.
DO NOT attempt to disassemble the device.
For more quiet use, ensure the unit is 3 feet away.
Keep the device away from children and pets.
The more concentrated the oil, the less diffusing ability.
If you do not plan to use this device for an extended period
of time, please store the device and the nozzle separately.
Working Temperature: 4°–104°F / 0 – 40°C
Suggested room size: 300-500 sq. ft.
3
5ml
10ml
15ml
Atomizer
20ml
Touch Button and Info Display4
3-Level Mist Control
- Tap: set mist level
- Long press: turn on/off
ambient light
Orange ambient lightBattery indicator
Timer settings:
- 1/2/4/6H
- Tap: choose timer
- When the time is finished, the
diffuser will turn off. Press & hold
power button to turn it on.
Ambient light indicator
Nozzle
1 4
2 5
3 6
4
5
1
3
2
4
6
The display will turn off after 30s if no buttons are
touched. You may tap any button to wake up the
display.
Power button
Press & hold for
approx. 1s to
turn it on/off
Level 1
15 seconds of diffusing, then a pause of 165s
Mist Level Explained
Level 2
1 minute of diffusing, then a pause for 2 min
Level 3
1 minute of diffusing, then a pause for 1 min
Low battery alert
Ambient light on
5
Removal:
Push from the top and lift your finger
until you hear a “tick” sound. The
nozzle will stick out. You may simply
pull it out to change / install a bottle
of essential oil.
Installation:
Screw the bottle to the nozzle, and
then push the nozzle until you hear
a “tick” sound. In order to install
properly, look for the “▲▼” sign
before you push the nozzle.
Bottle Installation
5
6
The device is compatible with 5/10/15/20ml bottles.
Charging
As charging cycles increase, battery life will decrease.
PC/MAC USB port
The battery indicator blinks green during charging,
and stays green once charging is finished.
You may charge from a 5V adapter, PC/MAC USB
port, or USB interface within your vehicle.
Please ensure the use of safety-certified charging
accessories.
6
7
Normal charging time: 3-5 hours. If the charging
current is below 1A, it will take longer to fully charge
the device.
Car USB port Adapter
Max. Oil Capacity: 20ml Size: 73*122mm
Input: DC-5V/1A Battery Capacity: 2000mAh
Rated Power: 1.5W Net Weight: 300g
Specifications
7
8
73mm
122mm
FAQ
Q1: How to select the right essential oil?
Use 100% pure essential oils. Resin and thick oil are not
recommended. Camphor tree and eaglewood oils are prohibited.
Q2: When I change to a new oil, there is mixed smell
coming from my previous oil. How do I clean the nozzle
and the bottle?
Fill the empty bottle with 5ml of 99% ethyl/ethanol alcohol.
Shake to fully rinse the inner surface of the bottle and then
empty it. Refill with another 5ml of ethyl/ethanol alcohol,
and then run the device until the alcohol runs out.
Q3: I feel like it stops running sometimes, what has
happened?
Please refer to section 4 for ‘mist level explained’. The
device is able to automatically optimize atomizing/pausing
according to mist level.
Q4: How long does it take to fully charge the device?
Normally 3-5 hours.
8
9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels AIRVERSA Accessoires
