AirLive SD-3030 Manuel utilisateur
SD-3030
30X 3MP Optical Zoom
Speed Dome IP Camera
Quick Installation Guide
Support
You can download the
complete guides and
supporting programs from
<http://www.airlivesecurity.c
om/product/sd-3030/downlo
ad>, or scan the QR code
here.
Please consult with the FAQs
<http://www.airlivesecurity.c
om/product/sd-3030/faq>
before writing to OvisLink
Tech Support Team for further
assistance
For any other question, please read the user
manual in the CD or mail to [email protected]
for technical support.
SD-3030 Package Contents
Please check the package contents and contact
your distributor if any part is missing.
1
2
3
SD-3030
Outdoor Mount Kit
Waterproof Rubber
4 Power Connector
5 Alarm I/O Connector
6 Audio I/O connector
7 Security Torx
8 Lubricant
9 Screw x 4
10 Label
11 User Manual CD
12 Quick Installation Guide
I/O Interface
Pin
1
2
3
Connector
Alarm I/O
Default Button
BNC
4 RJ-45
5 Power (AC 24V)
6 Audio I/O
7 microSD Card Slot
Camera’s Connectors
I/O Interface
Power Connection
Audio I/O Connection
Pin
1
2
3
Definition
AC 24V 1
GND
AC 24V 2
1
2
3
Pin
1
2
3
Definition
Audio Out
GND
Audio In
1
2
3
I/O Interface
Alarm I/O Connection
Pin
1
2
3
Definition
Alarm Out NO 1
Alarm Out NC 1
Alarm Out COM 1
4 GND
5 Alarm Out NO 2
6 Alarm Out NC 2
7
8
9
Alarm Out COM 2
GND
Alarm In 4
10 Alarm In 3
11 Alarm In 2
12 Alarm In 1
112
Open the optical cover by nail.
01
Remove Fixed Materials from the Speed Dome
Remove the white cushion, tape, and lens
cover from the speed dome.
Remove Fixed Materials from the Speed Dome
02
Put the optical cover back to the speed dome
after removing fixed materials.
Remove Fixed Materials from the Speed Dome
03
Use of a Category 5e Ethernet cable is
recommended for the network connection.
Connect a surge protector (SP-100E) to the
Category 5e cable.
If the speed dome is powered by the adapter,
please connect to a switch. If the speed dome
is powered by PoE, please connect to an
802.3at PoE switch.
Speed Dome Installation
04
SP-100E
Connect to the
Speed Dome
Connect to the
ground
Connect to a switch
or PoE Switch
When the environment temperature is below 7
Celsius degree , please use the adapter or
PoE+ switch to power on the speed dome.
If the speed dome is powered by the adapter,
please insert the power cable through the
pendent.
Speed Dome Installation
05
24V AC Power Adaptor
Insert the two sponge balls into the pendent.
Add the waterproof rubber on the pendent and
turn it over.
Speed Dome Installation06
Speed Dome Installation07
Mount the pendent on the wall and connect the
green wire of the network surge protector to the
ground.
Assemble the mounting kit on the pendent and
screw it.
The Mounting Kit
Speed Dome Installation08
Turn over the waterproof rubber to cover the join.
Hook the speed dome, connect Internet cable
and power connector.
Speed Dome Installation09
Assemble the speed dome on the mounting kit.
Screw and fix the speed dome.
Speed Dome Installation10
The default IP address of camera is
192.168.1.100. The camera will get IP address
automatically, if it connects to a modem/router
by DHCP function or you can assign a static IP
for the camera.
Important: Please make sure your
desktop/laptop is in the same network segment
with the camera, or your desktop/laptop cannot
connect to the camera in the network.
Set up the Network Environment11
Camera
Switch DHCP
PC/NB Router
7531
8642
8-portPOE + 2 Combo Gigabit 802.3at
DeviceGuard Web Smart Switch
POE-FSH1008AT
7531
8642
G2
LNK
LNK
PoE
LNK/ACT
PoE
LNK/ACTPWRRST
G1 G1 G2
192.168.1.100
192.168.1.254192.168.1.101
Install the Airlive IP Wizard12
Please use the CD to install IP Wizard.
Find Camera on the Network13
IP Wizard starts to scan camera automatically.
Click the camera you want to log in.
Important: Please make sure your
desktop/laptop is in the same network segment
with the camera, or your desktop/laptop cannot
connect to the camera in the network.
Access Camera on Web UI14
Please use IE to log in the camera. The default
username and password is admin/airlive.
You need to install the ActiveX on your PC
when you first access to the camera web UI.
Autres manuels pour SD-3030
2
Table des matières
Autres manuels AirLive Caméra IP
AirLive
AirLive WN-200HD Manuel utilisateur
AirLive
AirLive OD-2050HD Manuel utilisateur
AirLive
AirLive WL-2000CAM Manuel utilisateur
AirLive
AirLive POE-100CAM Manuel utilisateur
AirLive
AirLive POE-100HD Manuel utilisateur
AirLive
AirLive IP-200PHD Manuel utilisateur
AirLive
AirLive FE-200CU Manuel utilisateur
AirLive
AirLive OD-2025HD Manuel utilisateur
AirLive
AirLive WL-2600CAM Manuel utilisateur
AirLive
AirLive BU-3025 Manuel utilisateur
AirLive
AirLive IP-200PHD-24 Manuel utilisateur
AirLive
AirLive OD-2025PHD Manuel utilisateur
AirLive
AirLive WL-5460CAM Manuel utilisateur
AirLive
AirLive PoE-2600HD Manuel utilisateur
AirLive
AirLive BU-2015 Manuel utilisateur
AirLive
AirLive OD-300CAM Manuel utilisateur
AirLive
AirLive BC-5010 Manuel utilisateur
AirLive
AirLive FE-200DM Manuel utilisateur
AirLive
AirLive SD-3030 Manuel utilisateur
AirLive
AirLive POE-100CAMV2 Manuel utilisateur
