AirLive HP-2000E Manuel utilisateur

User’s Manual

HP-2000E

85Mbps Powerline Ethernet Adapter

English ●●●

Português ●●●

Español ●●●

AirLive

®English

85Mbps Powerline Ethernet

HP2000

AirLive Powerline Configuration Utility

Introduction

The AirLive Configuration Utility for Windows OS enables the users to identify

HomePlug devices (HP1000E Series & HP2000E Series) on the powerline

network; measures data rate performance, ensures privacy and performs

diagnostics by setting user defined secure powerline networks.

Configuration Utility Setup

Installation of the Utility

Users are requested to verify that no other Encryption Management Utilities

are installed prior to the installation of this utility. Other utilities should be

uninstalled before installing this utility.

In order to install, insert the HP2000E CD-ROM into the computer’s CD-ROM

drive. The Setup utility shall be run automatically. Alternatively this can also

be done manually by double clicking the setup.exe file on the CD.

The CD will launch an installation utility similar to the one shown in Figure 1.

Click the Next button to continue.

Figure 1: InstallShield Screen

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

In order to start the utility, double-click the utility icon. Figure 2 shows the

main screen of the Configuration Utility. The top panel of the screen shot

shows a HomePlug device connected locally to the host computer. The

bottom panel shows four devices connected remotely to the computer

running the utility, which includes HP1000E series and HP2000E Series.

Figure 3 illustrates the scenario where a HP2000E Series device is

connected as a local device to the computer.

Figure 2: Main Screen with HP1000E device Local

Figure 3: Main Screen with HP2000E device Local

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

User Interface

Main Tab

The Main screen provides a list of all powerline devices logically onnected

to the computer when the utility is running.

The top panel shows all local HomePlug devices connected to the

computer’s NIC (Network Interface Card). In most cases, only one device will

be seen. In situations where there are more than one local device being

connected, such as a USB or an Ethernet adapter, the user can select the

local device by clicking on it and then click the Connect button to its right.

The status area above the button indicates that your PC is connected to that

same device.

Once connected to the local device, the utility will automatically scan the

power line periodically for any other HomePlug devices. If no local HomePlug

devices are discovered, the status area above the connect button will indicate

with a message ‘NO HOMEPLUG ADAPTERS DETECTED’.

Figure 4 illustrates the presence of two local devices connected locally to the

computer.

Figure 4: Multiple Local Device Connection

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

The lower panel displays all the HomePlug remote devices, discovered on

the current logical network. The total number of remote devices connected on

the same network can be found on top of the Remote device panel. The

Network type (Public or Private) is also displayed based on the network status

of the local device. The scan status option is displayed on the top right corner

above the Remote devices panel showing whether the Autoscan functionality

is turned ON or OFF. The following information is displayed for all devices

that appear in the lower panel.

Device Name column shows the default device name, which may be user

re-defined. A user can change the name by either using the rename button or

by clicking on the name and editing in-place.

An icon is usually shown with the name. A color distinction in icons is made

between HP1000E Series and HP2000E Series devices. By default, the icon

is always accompanied by a device name.

MAC Address column shows the Remote device’s MAC address.

Password column by default is blank and ‘Enter Password’ button can be

used to enter it.

To set the Password of the device (required when creating a private

network), first select the device by clicking on its name in the lower panel and

then click on the Enter Password button. A dialog box will appear as shown in

Figure 5 to type the password. The selected device name is shown above the

password field and the password can be verified by hitting the OK button. The

Password field accepts the Device password in any case formats, with or

without dashed between them.

A confirmation box will appear if the password was entered correctly. If a

device was not found, the user will be notified along with the suggestions to

resolve common problems. This process might take a few seconds to get

completed.

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

The Add button is used to add a remote device to the existing network by

entering the device password of the device. A dialog box will appear as

shown below in Figure 6. The dialog box allows the user to enter both a

device name and the password.

A confirmation box will appear if the password was entered correctly and if

the device was found in the powerline network. If a device was not found, the

user will be notified and suggestions to resolve common problems will be

presented.

Figure 5: Set Device Password

Figure 6: Add Remote Device

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

Note: The device must be present on the power line (plugged in) in order for

the password to be confirmed and added to the network. If the device could

not be located, a warning message will be shown.

The Scan button is used to perform an immediate search of the HomePlug

devices connected to the Powerline network.

By default, the utility automatically scans every few seconds and updates the

display screen.

A typical screen after naming and supplying passwords might appear as in

Figure 7.

Figure 7: Main Screen of the Configuration Utility

Privacy Tab

The Privacy screen provides the user with an option to maintain security for

their logical network and also to select the devices that has to be included

in the network. The appearance is shown in Figure 8.

All HomePlug devices are shipped using a default logical network (network

name), which is normally “HomePlug”. The Privacy dialog screen allows

user to change to a private network by changing the network name

(network password) of devices.

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

The user can always reset to the HomePlug network (Public) by entering

“HomePlug” as the network name or by clicking on the Use Default button.

Note: Changing the network name to anything other than HomePlug will show

the network type on the main screen as Private.

The Set Local Device Only button can be used to change the network

name (network password) of the local device. If a new network password is

entered, all the devices seen on the Main panel prior to this will be no

longer present in the new network, effectively making the local devices not

to communicate to the devices who were in the old logical network.

Devices previously set up with the same logical network (same network

name) will appear in the device list afterward selecting this option.

The Set All Devices button is used to change the logical network of all

devices that appear on the Main panel whose Device’s Password had

been entered for the same logical network. A dialog window will appear to

report the success of this operation. For devices whose device password’s

were not entered, this operation will fail and will report a failure message.

Diagnostics Tab

The Diagnostics screen shows System information and a history of all remote

devices seen over a period of time. The appearance is shown in Figure 9.

Figure 8: Privacy Screen

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

The Upper panel shows technical data concerning software and hardware

present on the host computer which were used to communicate over

HomePlug on the Powerline network. It shall include the following:

Operating System Platform/Version

Host Network Name

User Name

MAC Address of all NICs (Network interface card) connected to the host

Identify versions of all Driver DLLs and Libraries used (NDIS) and optionally

HomePlug chipset manufacturer name (HP2000E Series Only devices)

MAC Firmware Version (HP2000E Series Only devices)

MAC addresses of all devices connected locally to the host

Version of the Configuration Utility

Vendor name

Figure 9: Diagnostics Screen

The Lower panel contains a history of all remote devices seen on the

computer over a certain period of time. All devices that were on the powerline

network are listed here along with a few other parameters. Devices that are

active on the current logical network will show a transfer rate in the Rate

column; devices on other networks, or devices that may no longer exist are

shown with a “?” in the Rate column. The following remote device information

is available from the diagnostics screen:

English

AirLive

®English

85Mbps Powerline Ethernet

HP2000

Device Alias Name

Device MAC Address

Device Password

Device Last known rate

Device Last Known Network name

HomePlug chipset manufacturer name

Date device last seen on the network

MAC Firmware Version (HP2000E Series Only)

The diagnostics information displayed may be saved to a text file for later use,

or can be printed for reference for a technical support call. Devices, which are

not part of the network anymore, can be deleted using the delete button. A

dialog window pops up with a confirmation message if we try to delete a

device whose password has been entered.

About Tab

The About screen shows the software version and provides a html link to the

OvisLink website. Clicking on the web address field will open a web browser

and take the user directly to the web site.

Preferences

The lower part of the panel may display options for user customizations or

preferences (such as turning the auto-scan feature on or off) as shown Figure

10 above.

English

Table des matières

Langues :

Autres manuels AirLive Adaptateur

AirLive

AirLive WN-5000USB Manuel utilisateur

AirLive

AirLive WL-1700USB Manuel utilisateur

AirLive

AirLive SKY-211 Manuel utilisateur

AirLive

AirLive WMM-3000PCI Manuel utilisateur

AirLive

AirLive WL-5480USB Manuel utilisateur

AirLive

AirLive AirLive HP-3000E Manuel utilisateur

AirLive

AirLive USB-25G Manuel utilisateur

AirLive

AirLive WN-5000USB Manuel utilisateur

AirLive

AirLive HP-1000 Manuel utilisateur

AirLive

AirLive WT-2000USB Manuel utilisateur

AirLive

AirLive VOIP-111A Manuel utilisateur

AirLive

AirLive WN-380USB Manuel utilisateur

AirLive

AirLive VoIP-111A Manuel utilisateur

AirLive

AirLive POE-48PBv2 Manuel utilisateur

AirLive

AirLive PJ-1001-30W Manuel utilisateur

AirLive

AirLive WL-1700USB Manuel utilisateur

AirLive

AirLive WL-8000 Series Manuel utilisateur

AirLive

AirLive VoIP-111A Manuel utilisateur

AirLive

AirLive VOIP-111A Manuel utilisateur

AirLive

AirLive X.USB Manuel utilisateur

AirLive

AirLive WL-5480USB Manuel utilisateur

AirLive

AirLive WT-2000USB Manuel utilisateur

AirLive

AirLive X.USB Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur