Airlink101 AICP310 Manuel utilisateur

Quick Installation Guide

Power Over Ethernet Network Camera

Model # AICP310

Ver. 1A

This Quick Installation Guide only provides basic instructions. For detailed

information on using this product and the software IPView Pro, please refer to

the User’s Manual on the supplied CD.

Getting Started

Step 1 Connect one end of a network cable to the IP Camera and connect the

other end to one of the LAN ports on your router or switch.

Step 2 If your router or switch does not support Power over Ethernet function,

you will need to provide power to the camera by connecting the supplied power

adapter. If you are using Power over Ethernet, you do not need to connect the

power adapter.

Step 3 Verify that all of the lights on the camera are lit or blinking. If not, check

to make sure that the Ethernet and power connections are secure, then try

again.

Installing the Setup Wizard

Step 1 Insert the provided CD and wait for the autorun screen to appear.

Step 2 Click on Install Setup Wizard.

Section 1

Section 2

Note: If the autorun screen does not appear automatically, go to Start, Run,

type D:\Wizard\Setup.exe (where Dis the letter of your CD drive) and click OK.

Step 3 Click Next.

Step 4 Click Yes to accept the License Agreement.

Step 5 Click Next to accept the default Destination Folder.

Step 6 Click Finish to complete the installation.

Using the Setup Wizard

Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard >

AirLink101 IP Camera Setup Wizard.

Section 3

Step 2 Select the IP Camera you want to configure from the list and click on the

Wizard button.

Step 3 If the Camera’s default IP address is on a different subnet, the following

message will appear. Click Yes to continue. If you do not receive this message,

skip to Step 6.

Step 4 Enter admin for both the Admin ID and Password and click OK.

Step 5 The Wizard will automatically generate an IP address for the camera, if

this address is not in use by any other device in your local network, click OK.

Otherwise, enter an available IP address (ex. 192.168.x.240) and click OK.

Step 6 Enter admin for both the Admin ID and Password field and click Next.

Optionally, you can change the password by checking on the Change box and

entering the new password.

Step 7 If you need to change the Camera’s IP address because another

network device is already using the same address, you can assign a new

address here and click Next.

Step 8 Verify that all the fields are correct and click Restart to save the settings

and reboot the camera.

Viewing Images

Step 1 At the Setup Wizard, select the desired camera from the list and click on

the Web Config button.

Step 2 Enter the username and password for the network camera. The default

username and password are both “admin”.

Section 4

Table des matières

Autres manuels Airlink101 Caméra de sécurité

Airlink101

Airlink101 AICN500 Manuel utilisateur

Airlink101

Airlink101 AICN747 Manuel utilisateur

Airlink101

Airlink101 AIC1620POE Manuel utilisateur

Airlink101

Airlink101 AICN1500W Manuel utilisateur

Airlink101

Airlink101 ASP37 Manuel utilisateur

Airlink101

Airlink101 AIC250W Manuel utilisateur

Airlink101

Airlink101 AIC250 Manuel utilisateur

Airlink101

Airlink101 AICN1747W Manuel utilisateur

Airlink101

Airlink101 AIC250W Manuel utilisateur

Airlink101

Airlink101 SkyIPCam 650 AICAP650 Manuel utilisateur

Airlink101

Airlink101 AIC1620POE Manuel utilisateur

Airlink101

Airlink101 AICN747 Manuel utilisateur

Airlink101

Airlink101 AICN1500W Manuel utilisateur

Airlink101

Airlink101 AICN747W Manuel utilisateur

Airlink101

Airlink101 AICN500 Manuel utilisateur

Airlink101

Airlink101 SkyIPCam310 Manuel utilisateur

Airlink101

Airlink101 AICN1500Wv2 Manuel utilisateur

Airlink101

Airlink101 AIC1620W Manuel utilisateur

Airlink101

Airlink101 AICN1500W Manuel utilisateur

Airlink101

Airlink101 AICN747W Manuel utilisateur

Airlink101

Airlink101 AICN500W Manuel utilisateur

Airlink101

Airlink101 AICN500W Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur