Ainstein WAYV Air Manuel utilisateur
2029 Becker Dr
Lawrence, KS 66047
User Manual
WAYV Air
FCC Version (Draft)
D00.02.06
August 17, 2020
Proprietary information
Page 1
2029 Becker Dr
Lawrence, KS 66047
Revision History:
Version Number
Date
Authors
Notes
D00.00.01
Sept 16, 2019
Muhua Luo
D00.00.02
Sept 19, 2019
Hao Liu
Modify, supplement
hardware related
content
D00.01.01
Sept 26, 2019
Andrew
Megaris
Translation and
Technical Revision
D00.02.00
Mar 4, 2020
Zhenyu Hu
Initial draft for Wayv
Air hardware ES2.0
D00.02.01
Mar 17, 2020
Zhenyu Hu
Add RS485 Hub in
Section 6
D00.02.02
Mar 26, 2020
Zhenyu Hu
Add and test WiFi
‘Station Mode’
D00.02.03
May 28, 2020
Zhenyu Hu
More description for
Point-Cloud mode setup
D00.02.04
June 24, 2020
Zhenyu Hu
1. Add information of
USB (RS-232) Version
2. Add software version
information
D00.02.05
June 29, 2020
Zhenyu Hu
Add device Specs
D00.02.06
Aug 17, 2020
Zhenyu Hu
Add FCC verbiage and
adjust text format
Proprietary information
Page 2
2029 Becker Dr
Lawrence, KS 66047
IMPORTANT NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B device
(commercial or industrial use), pursuant to Part 15 of FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communication. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his/her own expense.
NOTE:
●Only peripherals complying with FCC limits may be attached to this equipment.
Operation with non-compliant peripherals or peripherals not recommended by
Ainstein.
●Modification of this device may void the user’s authority to operate the equipment
●Maintain 20cm of separation for the device during operation.
Proprietary information
Page 3
2029 Becker Dr
Lawrence, KS 66047
Firmware Version Information
Firmware/Software
The latest Version
Radar Application Firmware
V2.0.29
Radar Bootloader
V2.0.10
GUI Tool on Windows machine
V1.0.1.6
Note:
●The table only indicates the latest version of firmware/software for Wayv Air. For previous
versions information, please contact Ainstein.
●We recommend to use the GUI tool to update the Radar Application Firmware and Radar
Bootloader to achieve the better performance
Proprietary information
Page 4
2029 Becker Dr
Lawrence, KS 66047
1. Introduction
Wayv Air is a short-range radar that detects people indoors. It operates at 60GHz
frequency band, and its detection range is up to 6 m. The small size and light weight make
it feasible to be installed/mounted on ceiling or wall.
2. Specification
Specification
Operating Frequency
60.3 ~ 63.6 GHz
Swept Frequency
3.3 GHz
Azimuth Angle
120 Degree
Elevation Angle
120 Degree
Detection Range
Maximum 6m for People Detection
Data Refresh Rate
50ms
Machine Power
<5W
Machine Size
76.8mm*70.3mm*25.4mm(without cable and bracket )
Weight
Radar 84g, bracket + screw 64g
IP Rate
N/A
Operational
Temperature Range
-20 ° C ~ 50 ° C
Note:
●All specs above are measured under the environment of 35 °C temperature, standard
atmospheric pressure and humidity, without any Electromagnetic Interference (EMI).
●Operational Temperature Range indicates radar works properly in this range. If operating
temperature goes beyond this range, radar might not be accurate and can suffer mechanical
damage.
Proprietary information
Page 5
2029 Becker Dr
Lawrence, KS 66047
3. Software (GUI and API)
3.1 Software Path Requirement
The path of software (GUI) should only contain numbers and letters. DO NOT contain
other characters or symbols.
3.2 Software Files and Structure
●Vave.exe
●icon folder; It contains icon image files, GUI is not able to work/display if this folder
is missing.
3.3 API
We also provide API with source code for the end-users who would like to receive data
from Wayv Air and do their own customized development. Please contact Ainstein to
request it, NDA or other extra documents might be needed for this request.
4. Hardware
4.1 Cable for Power & Communication
●Power Supply: USB TYPE-C connector
Proprietary information
Page 6
2029 Becker Dr
Lawrence, KS 66047
○Voltage input
■5V~15V for RS-485 version
■Maximum 5V for USB version
○Typ. 4W
●Four-pin at on the left-hand side is A
Pin #
Description
P1
GND
P2
●RS-485 D-
●USB Data-
P3
●RS485 D+
●USB Data+
P4
Power
Note:
1. The default version of Wayv Air is RS-485. If you have the USB version, ‘RS-485’ represents
‘Serial Port Communication’ in the rest of the description in this document.
2. For USB version users, it is good to use the USB to USB-C cable, instead of the default cable in
the above picture. Please make sure that the USB port for Wayv Air can support the current at
least of 1 Amp.
Proprietary information
Page 7
2029 Becker Dr
Lawrence, KS 66047
4.2 Device Status LED and Interface Description
1. Status LED
○System Booting: Magenta blink
○Firmware Flash: Blue blink
○Firmware Booting: Blue ON
○Normal Operation: No Target -- Green blink; Target detected -- Magenta
blink
2. Reset Button
Long press to restore factory settings
○Wifi Name: Device serial #
○Password: 12345678
○Serial Port Communication Baud Rate: 115200
○Serial Port Communication ID: 1
○Initial Configuration: Default
3. USB Type-C Connector
○Power supply
○Serial Port Communication
4. Device ID: Serial Number on device (See it under QR code on the back panel of
Wair Air)
5. WiFi Mode Connection
5.1 WiFi Connection for Single Device (AP Mode)
Wayv Air supports WiFi connection for single device (AP Mode), see following steps for
AP Mode connection.
Note: To make sure WiFi connection between Wayv Air and host PC is functioning properly, please
disable any anti-virus software and firewall on your host PC.
Proprietary information
Page 8
2029 Becker Dr
Lawrence, KS 66047
1. Power Wayv Air device on. Make WiFi connection between host PC and Wayv Air
○Set IPV4 address of host PC as: 192.168.4.65
○Find WiFi name (Serial Number) of desired Wayv Air device
○Connect Wayv Air device by typing password: 12345678
Proprietary information
Page 9
2029 Becker Dr
Lawrence, KS 66047
2. Make RS485 AP Mode connection to query/configure the ‘WiFi work mode’ and ‘Server
address’ (For details of RS485 AP Mode connection, please refer to Section 6.1)
1) Wayv Air is in WiFi AP Mode by default, if the user never configured it to WiFi Station
Mode. Skip all the rest of steps in 4 and jump to 5.
2) After making RS485 AP Mode connection, click ‘System Config’ icon; Click ‘Query’
button on the bottom to show current configuration information.
○If the ‘WiFi work mode’ displays ‘AP mode’, and ‘Server address’ displays
‘192.168.4.65’, close the ‘System Config’ window and jump to 5.
○Otherwise, configure ‘WiFi work mode’ to ‘AP mode’, and ‘Server address’ to
‘192.168.4.65’;
Proprietary information
Page 10
Table des matières
Autres manuels Ainstein Radar
Manuels Radar populaires d'autres marques
SAW D2L
SAW D2L Valentine One Gen2 Manuel utilisateur
Raymarine
Raymarine Raytheon R20X Manuel utilisateur
Simrad
Simrad CA34 Manuel utilisateur
Endress+Hauser
Endress+Hauser Micropilot FMR67B Caractéristiques techniques
Endress+Hauser
Endress+Hauser Levelflex M FMP45 Manuel utilisateur
ECHOMAX
ECHOMAX Active-X-Band Manuel utilisateur
