Aim AIVE Guide d'installation

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 1

AIM company l www.aim-fa.com

Basic manual

28th.OCT.2021 . Rev2.0

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 2

1. Introduction

1-1) Copyright and History

1-2) Introduction

1-3) Safety

1-4) Introducing and using AIVE

2. AIVE appearance and installation

2-1) Dimension of AIVE

2-2) Part names and Specifications

2-3) AIVE installation mechanism

2-4) AIVE installation power supply

2-5) Interface panel

3.Control of AIVE

3-1) Principle of operation

3-2) Status LED

3-3) AIVE PC program

3-4) Manual control

3-5) Digital IO

3-6) Ethernet control

3-7) IP change

Contents

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 3

Chepter1

1. Introduction

AIM company l www.aim-fa.com

1-1) Copyright and History

1-2) Introduction

1-3) Safety

1-4) Introducing and using AIVE

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 4

All information contained in this document is the property of AIM Co., Ltd., and all

or part of that information may not be reproduced without the prior written consent

of AIM Co., Ltd. This information is subject to change without notice. This document

is reviewed and revised regularly.

AIM is not responsible for any errors or omissions in this document. Requests for

corrections to user errors are always welcome. AIM Co., Ltd. respects the opinions of

our customers and will refer to them when preparing documents in the future.

Please send a comment by email below sales@aim-fa.com

2019 AIM reserves all rights to this document. AIVE is manufactured in South Korea

and is a registered trademark of AIM Co., Ltd.

History

Ver1.0 _ Sep.2019 AIVE2.0 First edition

Ver1.1 _ Apr.2020.04 AIVE2.1 Update

Ver2.0 _ Oct.2021 Renewal

1-1) Copyright and History

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 5

Mass supply

Variety of

products

Check product

location

Vibration

Turn it over and spread

Parts

supply

Parts handling

Hopper system Flexible feeder Vision system Industrial robot

1-2) Introduction

System configuration between robot and vision system

Turn it over Spread

Wide range and Accurate vibration

Turn it over and spread the product with accurate vibration

Stroke Frequency Time

Optimized control with Data

Vibration control in units of 0.1mm and 1Hz

•Three intuitive data controls

•Convenience such as manual

operation and PC control

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 6

What to do in an emergency

Use the power off button on the side of the AIVE. Press the emergency stop button

(Yellow background/Red push button) on all robots being used together. This

button de-energizes the feeder and follows the company’s or organization’s internal

procedures in case of an emergency. In case of fire, CO2is used to extinguish the

fire.

1-3) Safety

Safety function

Motor temperature sensor

It is set at 36℃, and when it exceeds this, an alarm code is displayed and the

power to the motor is cut off.

Peak limitation:

Forced stop when the motor maximum current time setting time exceeds 4000mA, 1Sec.

Motor stuck _temperature :

If the motor does not move due to external force, forced stop when the set time is exceeded.

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 7

The AIVE® feeder is available with a square plastic box attached to the top of the

vibrator and optionally a backlight to illuminate the part.

The plastic upper of AIVE® can be selected according to the product supplied, the

material required, and the color required for the thick product.

The AIVE® feeder is a vibration feeder that can supply a variety of components using a

visionary industrial robot system. The parts come in a variety of shapes and can be

made from a variety of materials.

Contact AIM Engineering for slippery, fragile, or precision parts.

AIVE® feeders are not suitable for handling liquid products or flexible materials.

1-4) Introducing and using AIVE

Most of the AIVE® components are located inside

the body. The top of the unit has an exposed

vibrating feeder and the top of the AIVE is equipped

with a user-supplied camera.

Pictured from the side is the outside of the AIVE®

feeder. Because the vibrating platform is translucent,

the camera can discern the silhouette of the plastic

part.

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 8

Chepter2

AIVE appearance

and installation

AIM company l www.aim-fa.com

2-1) Dimension of AIVE

2-2) Part names and Specifications

2-3) AIVE installation mechanism

2-4) AIVE installation power supply

2-5) Interface panel

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 9

2-1) Dimension of AIVE

AIVE2.1

2021-10-28

REV2.0

Flexible parts feeder system

AIM company l www.aim-fa.com 10

AIVE3.0

Table des matières

Manuels Dévidoir de fil populaires d'autres marques

Abicor Binzel

Abicor Binzel MFS-V2 Manuel utilisateur

Emotron

Emotron CDN Series Manuel utilisateur

Robe

Robe TAP5-EZ2-32-F4 Instructions d'installation

WIA

WIA W64-1 Manuel utilisateur

GYS

GYS SMARTFEED M-4 Manuel utilisateur

GYS

GYS Easy Tig Manuel utilisateur

Lincoln Electric

Lincoln Electric LN-25X Manuel utilisateur

Matrix

Matrix OmniFlow 330 Fiche technique

EWM

EWM drive 4X IC D EX Manuel utilisateur

Lincoln Electric

Lincoln Electric 12442 Manuel utilisateur

Lincoln Electric

Lincoln Electric Power Feed 10 Robotic K1780-2 Manuel utilisateur

Miller

Miller XR-AlumaFeed Suitcase Manuel utilisateur

Lincoln Electric

Lincoln Electric Activ8X Manuel utilisateur

Abicor Binzel

Abicor Binzel iROB Feed HA Manuel utilisateur

EWM

EWM drive 4X IC D EX Manuel utilisateur

Lincoln Electric

Lincoln Electric LF-72 Manuel utilisateur

Hakko Electronics

Hakko Electronics 373 Manuel utilisateur

Hakko Electronics

Hakko Electronics 375 Manuel utilisateur