Aim SoloDL Instructions de fonctionnement

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels Aim Accessoires pour motos

Aim

Aim MXK10 Manuel utilisateur

Aim

Aim MXK10 Manuel utilisateur

Aim

Aim MyChron3 Dash Manuel utilisateur

Aim

Aim My-Chron 2 Manuel utilisateur

Aim

Aim Solo 2 Manuel utilisateur

Aim

Aim EVO4 Manuel utilisateur

Aim

Aim EVO4 Manuel utilisateur

Manuels Accessoires pour motos populaires d'autres marques

SRC

SRC B-TRK502-01-01-SL Manuel utilisateur

3M

3M Speedglas 9100 MP Manuel utilisateur

hepco & becker

hepco & becker 6307520 00 01 Manuel utilisateur

HOMCOM

HOMCOM AA0-077 Manuel utilisateur

hepco & becker

hepco & becker 6307558 00 01 Manuel utilisateur

Wunderkind Custom

Wunderkind Custom 106503-F15 Guide de l'utilisateur

Dräger

Dräger HPS 3500 Manuel utilisateur

M-WAVE

M-WAVE SKI Manuel utilisateur

Kuryakyn

Kuryakyn 6212 Manuel utilisateur

hepco & becker

hepco & becker 6507504 00 01 Manuel utilisateur

Tool it

Tool it PROMAX LCD 9.13G Manuel utilisateur

Custom Dynamics

Custom Dynamics TruWrapz Manuel utilisateur

Roof

Roof RO200 CARBON Manuel utilisateur

Kabuto

Kabuto Japan IBUKI Manuel utilisateur

PUIG

PUIG 5051 Manuel utilisateur

rizoma

rizoma ZTH050 Manuel utilisateur

Joubert

Joubert 10001711 Manuel utilisateur

Sperian

Sperian Optrel p420 Manuel utilisateur

AIM Infotech

Ducati Hypermotard

Release 1.00

1

1

Bike years

This tutorialdescribes how to connect AIM SoloDL, EVO4 and ECU Bridge to Ducati Hypermotard from

2009 onward.

2

CAN bus connection

Ducati Hypermotard communicates through the CAN Busthat can be reached on an FCI connector

placed under thebike seat and shown herebelow.

2

3

Connection with AIM devices

Herefollow instructions on how to connect this Ducati biketo AIM SoloDL, EVO4 and ECU Bridge:

3.1

Connection with SoloDL

To connect SoloDL to this Ducati bike use the seven pins right Binder female connector placed under

the logger.This connection requires adedicated cable properly designed and developed by AIM

whose part number is V02569170.Through this cable you can also power yourSoloDL. Here below

SoloDL female Binder position with its pinout and the dedicated cable are shown.

3

3.2

Connection with EVO4

EVO4 has the CAN Bus on the ECU connector (highlighted inred here below). This connection requires

a dedicated cable properly designed and developed by AIM whose part numberisV02563150.

Please note:EVO4 needs externalpower. Refer to EVO4 user manual to know how to power the

logger.

Herebelow EVO4 RPM connector and the dedicated cableare shown.

4

3.3

Connection with ECU Bridge

ECU Bridge is available in different versions.The one that fits thisinstallation has partnumber

X90BGDDDA.Through the FCI connector you can also power yourECU Bridge.Here belowyou see

ECU Bridge with the FCIconnector.

5

4

AIM Loggerconfiguration

Once the ECU connected to the logger, thislastone is tobeconfigured as connected to thatECU.

Run Race Studio 2 softwareand follow this path:

•Device Configuration –> Select thedevice you are using;

•select theconfiguration or press “New” to create a newone;

•select ECUmanufacturer “Ducati” and ECUModel “Hypermotard”;

•transmit theconfiguration to the device pressing “Transmit”.

5

Available channels

Channels received by AIM devices connected to Ducati Hypermotard are:

ID CHANNEL NAME FUNCTION

ECU_1 HY_RPM RPM

ECU_2 HY_SPEED Vehicle speed

ECU_3 HY_THRT2 Throttleposition sensor 1

ECU_4 HY_THRT1 Throttleposition sensor 2

ECU_5 HY_ENGT Engine temperature

ECU_6 HY_IAT Intake airtemperature

ECU_7 HY_VBATT Battery supply

ECU_8 HY_GEAR Engaged gear

ECU_9 HY_OIL_LAMP Oil alarm