Agora Models Mitsubishi A6M ZERO Fighter Manuel

STAGE 46: ATTACHING THE TYPE 99

MKII 20 MM MACHINE GUN TO THE

RIGHT LANDING GEAR

STAGE 47: ATTACHING THE RIGHT LANDING

GEAR AND MOTOR

STAGE 48: INSTALLING THE RIGHT AILERON

STAGE 49: INSTALLING RIGHT WING

SUPPORT FITTINGS, THE EXTERNAL PANEL

FRAME AND THE COCKPIT

STAGE 50: ASSEMBLING THE TAIL GEAR

RETRACTION MECHANISM

STAGE 51: CHECKING THE ELEVATOR

SERVOMOTOR

STAGE 52: ASSEMBLING THE RIGHT

LANDING GEAR (1)

STAGE 53: TESTING THE SERVOMOTOR

AND ASSEMBLING THE TAIL GEAR

RETRACTION MECHANISM (3)

Pack 06 |Build Instructions

Your 1:18 model of the Japanese Zero is reproduced in the most exquisite

detail, with electronics allowing you to recreate aeronautical operations such

as take-off and landing, turning, ﬁring and night combat. Lights, machine-gun

and propeller sounds bring your legendary ﬁghter plane to life.

In your sixth model pack, you will assemble:

North America Edition by Agora Models

AGORAMODELS A6M ZERO

Not suitable for children under the age of 14. This product is not a toy and is not designed for use in play. Keep

the parts out of the reach of small children. Some parts may have sharp edges. Please handle them with care.

Advice from the experts

Spare screws are included with each part. Occasionally, you may

be instructed to keep spare or unused screws for a later stage.

Keep these spares in a safe place and label them correctly.

Please make sure you don’t mix up the screws. They look quite

similar, but the threads do vary slightly. Using the wrong screws

may damage the parts.

When securing parts together using multiple screws, ﬁt each

screw loosely to ensure all the parts are correctly aligned before

gently tightening them ﬁrmly, but not overtight, in the order in

which you placed them.

The screwdriver can be magnetised by stroking it with a magnet

(fridge magnet, etc.) enabling it to hold the screws and make

assembly easier.

If a screw is tight going into a metal part, do not force it as you

may shear the head off. Remove it and put a tiny smear of Vaseline,

soap or light oil on the thread. That will lubricate it and make it

easier to drive home.

During the course of this build, you will receive many pieces that

you will assemble immediately – following the instructions in the

corresponding stage – and other pieces that you should store

safely to one side, for use in future assembly stages.

When gluing parts together, glue may be applied to either of the

two parts. Some experts ﬁnd it asier to apply glue to a hole rather

than a pin. Choose a method that works best for you.

It's a good idea to test ﬁt your parts so that you can check their

positioning before gluing.

There are excellent videos showing

how to build the Zero here.

You will also need: tweezers, screwdriver, needle-nose pliers

046-01 046-02

046-03 046-04

046-01

046-02

046-03

046-04

Switch board

LED

Steel

ABS resin

１

（1 spare）

MATERIALNo.PART

STAGE 46 PARTS PARTS LIST

Stage 46 Assembly

Landing Gear & Machine Gun

Stage 46: Attaching the Type

99 MkII 20 mm Machine Gun

to the Right Landing Gear

In this stage we’ll be installing the landing gear

limit switch as well as assembling the Type 99

mk II 20 mm machine gun and then attaching

this to the landing gear frame.

組み立てガイド組み立てガイド

AGORAMODELS A6M ZERO

Attaching the landing gear limit switch

STEP 1

NOTE

Since the LED has a hard

metal wire, if you try to install

it as it is, the metal wire will

get in the way. Hold the area

just below the LED with

needle-nose pliers and bend

the metal wire with your

ﬁngers.

Installing the right landing gear

STEP 2

Assembling and attaching the Type 99 mkII 20 mm machine gun

STEP 3

046-04

046-02

044-04

044-02

Fit the right landing gear assembled in stage 43 into the right

wing frame 044-01.

Fix the right landing gear with 1 x 044-02

(thick one) and 1 x 044-04 (thin one) screw

that came with stage 44.

Insert LED 046-02 into the Type 99 20-millimeter machine gun (right) 046-04.

044-01

046-01

041-11

046-03

Place the right landing gear limit switch 046-01 on the right wing frame 044-01, and ﬁx it with two screws 046-03. The cord of the

switch 046-01 should be fed out through the hole of the wing frame 044-01. The screw on the left is ﬁxed by sandwiching the washer,

so be careful not to shift the washer 041-11.。

Place the washer 041-1 1 on the right wing frame 044-01 so that the holes match.

：Glue

：Don’t Glue

：Glue

：Don’t Glue

組み立てガイド組み立てガイド

AGORAMODELS A6M ZERO

Attaching the landing gear limit switch

STEP 1

NOTE

Since the LED has a hard

metal wire, if you try to install

it as it is, the metal wire will

get in the way. Hold the area

just below the LED with

needle-nose pliers and bend

the metal wire with your

ﬁngers.

Installing the right landing gear

STEP 2

Assembling and attaching the Type 99 mkII 20 mm machine gun

STEP 3

046-04

046-02

044-04

044-02

Fit the right landing gear assembled in stage 43 into the right

wing frame 044-01.

Fix the right landing gear with 1 x 044-02

(thick one) and 1 x 044-04 (thin one) screw

that came with stage 44.

Insert LED 046-02 into the Type 99 20-millimeter machine gun (right) 046-04.

044-01

046-01

041-11

046-03

Place the right landing gear limit switch 046-01 on the right wing frame 044-01, and ﬁx it with two screws 046-03. The cord of the

switch 046-01 should be fed out through the hole of the wing frame 044-01. The screw on the left is ﬁxed by sandwiching the washer,

so be careful not to shift the washer 041-11.。

Place the washer 041-1 1 on the right wing frame 044-01 so that the holes match.

：Glue

：Don’t Glue

：Glue

：Don’t Glue

組み立てガイド組み立てガイド

AGORAMODELS A6M ZERO

The machine gun (right) 046-04 assembled in 1 is installed in the right main wing frame 044-01. The wire of LED 046-02 should be

fed through the same hole as the wire of the right landing gear limit switch 046-01.

The machine gun 046-04 is ﬁxed with 1 x 046-03 screw .

046-03

046-04

STAGE COMPLETE

組み立てガイド組み立てガイド

AGORAMODELS A6M ZERO

You will also need: screwdriver

047-01

047-02

Plastic

Motor

047-01

047-02

MATERIALNo.PART

STAGE 47 PARTS PARTS LIST

Stage 47 Assembly

Right Landing Gear Motor

Stage 47: Attaching the

Right Landing Gear and

Motor

In this stage we’ll attach the right landing gear as well

as the motor (which drives this side forward) to the

left wing frame. Be careful when installing the gears

and make sure the motor gears properly engage.

組み立てガイド組み立てガイド

AGORAMODELS A6M ZERO

組み立てガイド組み立てガイド

Attaching the right landing gear and motor

STEP 1

NOTE

Make sure the landing gear and motor gear properly engage

when installing these parts

045-01

047-02

047-01

045-06

045-05

045-03

044-01

STAGE COMPLETE

：Glue

：Don’t Glue

AGORAMODELS A6M ZERO

組み立てガイド組み立てガイド

Attaching the right landing gear and motor

STEP 1

NOTE

Make sure the landing gear and motor gear properly engage

when installing these parts

045-01

047-02

047-01

045-06

045-05

045-03

044-01

STAGE COMPLETE

：Glue

：Don’t Glue

AGORAMODELS A6M ZERO

You will also need: screwdriver, tweezers, superglue.

048-01

048-02

048-03

048-04

048-05

048-06

048-07

048-01

048-02

048-03

048-04

048-05

048-06

048-07

ABS resin

Steel

１

（1 spare）

MATERIALNo.PART

STAGE 48 PARTS PARTS LIST

Stage 48 Assembly

Aileron

Stage 48: Installing the

Right Aileron

In this stage we’ll be installing the right

aileron. Not inserting or ﬁtting small parts

properly or having them in a skewed

position means the model won’t work later.

組み立てガイド組み立てガイド

AGORAMODELS A6M ZERO

Autres manuels pour Mitsubishi A6M ZERO Fighter

Autres manuels Agora Models Jouet

Agora Models

Agora Models Mitsubishi A6M ZERO Fighter Manuel

Agora Models

Agora Models FERRARI 312 T4 Manuel utilisateur

Agora Models

Agora Models Mitsubishi A6M ZERO Fighter Manuel

Agora Models

Agora Models Mitsubishi A6M ZERO Fighter Manuel

Agora Models

Agora Models Bismarck Manuel

Agora Models

Agora Models Mitsubishi A6M ZERO Fighter Manuel

Agora Models

Agora Models Hachette Mitsubishi A6MZERO FIGHTER Manuel

Agora Models

Agora Models LONDON TRANSPORT ROUTEMASTER RM 857 Manuel

Agora Models

Agora Models CORVETTE STING RAY 1963-Z06/N03 Manuel

Agora Models

Agora Models ALIEN Manuel

Agora Models

Agora Models OPTIMUS PRIME Pack 02 Manuel

Agora Models

Agora Models OPTIMUS PRIME Pack 05 Manuel

Agora Models

Agora Models OPTIMUS PRIME Pack 03 Manuel

Agora Models

Agora Models Bismarck 06 Manuel

Agora Models

Agora Models ALIEN Pack 03 Manuel

Agora Models

Agora Models Lamborghini MIURA Manuel

Agora Models

Agora Models FDNY FIRE TRUCK TOWER LADDER 9 Manuel

Agora Models

Agora Models FERRARI 312 T4 Manuel utilisateur

Agora Models

Agora Models FERRARI 312 T4 Manuel utilisateur

Agora Models

Agora Models Bismarck 08 Manuel

Agora Models

Agora Models OPTIMUS PRIME Pack 01 Manuel

Agora Models

Agora Models Hachette Mitsubishi A6MZERO FIGHTER Manuel

Agora Models

Agora Models OPTIMUS PRIME Pack 04 Manuel

Agora Models

Agora Models Hachette Mitsubishi A6MZERO FIGHTER Manuel

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur