3
1: Introduction
This Hazardous Location light is designed for illumination of industrial locations. It uses the latest in solid
state lighting technology for long life, low maintenance, and high efficiency.
The directional light are lighting where it is needed, giving improved efficiency over a conventional HID
luminaries.
An internal power-factor-corrected switch-mode supply allows it to be used from any rated supply voltage
(see product label) without a variation in light output.
Wet Locations as per UL 1598
Outdoor Type (Salt Water) as per UL 1598A
These models are also suitable for applications where high pressure wash-down is used to clean and sanitize
equipment.
Note: Save these instructions for future reference.
“THE ELECTRICAL CHARACTERISTICS OF THE LIGHT FIXTURE ARE THOSE
INDICATED ON THE PRODUCT LABEL”
2: Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and
maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
Be certain electrical power is OFF before and during installation and maintenance.
Luminaire must be connected to a wiring system with an equipment -grounding conductor.
Make sure the supply voltage is the same as the rated luminaire voltage.
Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
Models No. Zeus-200W, Zeus-105W, Zeus-40W are suitable for use in the following locations:
