Agilent Technologies IDP3GBKIT Manuel utilisateur

Table des matières

Autres manuels Agilent Technologies Équipement de laboratoire

Agilent Technologies

Agilent Technologies OmnoBER 725 Manuel utilisateur

Agilent Technologies

Agilent Technologies 11970 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 7683 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6500 Series Manuel d'utilisation

Agilent Technologies

Agilent Technologies Magnis G9710A Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Guide de l'utilisateur

Agilent Technologies

Agilent Technologies 979 Instructions d'utilisation et de sécurité

Agilent Technologies

Agilent Technologies 1290 infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies G1960-60470 Manuel utilisateur

Agilent Technologies

Agilent Technologies UHV-24 Manuel utilisateur

Agilent Technologies

Agilent Technologies G2916A Manuel utilisateur

Agilent Technologies

Agilent Technologies G4319A Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies E6000C Manuel utilisateur

Agilent Technologies

Agilent Technologies 1141A Manuel

Agilent Technologies

Agilent Technologies BenchCel Manuel utilisateur

Agilent Technologies

Agilent Technologies G1289 Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6490 Manuel

Agilent Technologies

Agilent Technologies 53150A Manuel utilisateur

Agilent Technologies

Agilent Technologies M9302A Guide de l'utilisateur

Agilent Technologies

Agilent Technologies ZORBAX RRHT Series Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur

Quick Reference Guide

TPS-compact Gas Ballast

The TPS-compact packaging includes a standard gas ballast kit (P/N IDP3GBKIT) that can be used to prevent water and

other condensates from accumulating within the foreline pump. The standard configuration has a seal screw installed in the

1/4-20 thread in the top of the exhaust manifold. This configuration can be used for dry applications.

When appreciable amounts of water, solvents, etc., are being pumped, remove the seal screw and replace it with the provided

adapter and 1/8" NPT sintered filter plug.

WARNING

Before install gas ballast adapter remove the power supply cable.

1. Disconnect the TPS-compact from electrical power.

2. Unlock the scroll pump support by unscrewing the screws.

3. Lift the TPS-compact in order to access the Scroll pump site.

Quick Reference Guide

4. Unscrew seal screw and install provided gas ballast adapter and 1/8’’ NPT.

5. Lock the scroll pump support by screwing the screws.

Be careful during pump support closing to prevent damage to system components (vacuum pipes and

connectors).

NOTE

1. During the operation of the gas ballast feature the noise may increase.

2. There is not a predefined amount of time to let the gas ballast open: it depends on the amount of

moisture trapped in the system.

Do not exceed 2.8 Nm of torque when installing the adapter into the manifold.

For more details about gas ballast refer to the manuals of the single TPS-compact components.

Use the provided adapter and 1/8" NPT sintered filter plug in order to avoid dust entrance.

The gas ballast must be sealed whenever pumping any gas not intended to be vented to

atmosphere.

Contacts:

U.S. and Canada (toll free):

+1 800 882 7426

vpl-[email protected]

Europe & other countries (toll free):

+00 800 234 234 00

vpt-[email protected]

China (toll free):

400 8206778 (mobile)

800 8206778 (landline)

vpd-support-[email protected]

Visit the product web page: www.agilent.com/chem/tpscompact

This information is subject to change without notice.

© Agilent Technologies, Inc. 2022

Printed in Italy, January 14th, 2022

X3582-90000-9-PUI rev. A.00

CAUTION

CAUTION

CAUTION

CAUTION